lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <3e11939b-d62a-caf3-e51c-f67651c8cb6a@amd.com>
Date: Thu, 7 Nov 2024 16:56:42 +0530
From: "Rangoju, Raju" <raju.rangoju@....com>
To: Greg KH <gregkh@...uxfoundation.org>
Cc: linux-usb@...r.kernel.org, mathias.nyman@...el.com,
 linux-kernel@...r.kernel.org, stable@...r.kernel.org
Subject: Re: [PATCH] usb: xhci: quirk for data loss in ISOC transfers



On 11/5/2024 3:03 PM, Greg KH wrote:
> On Tue, Nov 05, 2024 at 02:48:50PM +0530, Raju Rangoju wrote:
>> During the High-Speed Isochronous Audio transfers, xHCI
>> controller on certain AMD platforms experiences momentary data
>> loss. This results in Missed Service Errors (MSE) being
>> generated by the xHCI.
>>
>> The root cause of the MSE is attributed to the ISOC OUT endpoint
>> being omitted from scheduling. This can happen either when an IN
>> endpoint with a 64ms service interval is pre-scheduled prior to
>> the ISOC OUT endpoint or when the interval of the ISOC OUT
>> endpoint is shorter than that of the IN endpoint. Consequently,
>> the OUT service is neglected when an IN endpoint with a service
>> interval exceeding 32ms is scheduled concurrently (every 64ms in
>> this scenario).
>>
>> This issue is particularly seen on certain older AMD platforms.
>> To mitigate this problem, it is recommended to adjust the service
>> interval of the IN endpoint to exceed 32ms (interval 8). This
>> adjustment ensures that the OUT endpoint will not be bypassed,
>> even if a smaller interval value is utilized.
>>
>> Cc: stable@...r.kernel.org
>> Signed-off-by: Raju Rangoju <Raju.Rangoju@....com>
>> ---
>>   drivers/usb/host/xhci-mem.c |  5 +++++
>>   drivers/usb/host/xhci-pci.c | 14 ++++++++++++++
>>   drivers/usb/host/xhci.h     |  1 +
>>   3 files changed, 20 insertions(+)
>>
>> diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
>> index d2900197a49e..4892bb9afa6e 100644
>> --- a/drivers/usb/host/xhci-mem.c
>> +++ b/drivers/usb/host/xhci-mem.c
>> @@ -1426,6 +1426,11 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
>>   	/* Periodic endpoint bInterval limit quirk */
>>   	if (usb_endpoint_xfer_int(&ep->desc) ||
>>   	    usb_endpoint_xfer_isoc(&ep->desc)) {
>> +		if ((xhci->quirks & XHCI_LIMIT_ENDPOINT_INTERVAL_9) &&
>> +		    usb_endpoint_xfer_int(&ep->desc) &&
>> +		    interval >= 9) {
>> +			interval = 8;
>> +		}
>>   		if ((xhci->quirks & XHCI_LIMIT_ENDPOINT_INTERVAL_7) &&
>>   		    udev->speed >= USB_SPEED_HIGH &&
>>   		    interval >= 7) {
>> diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
>> index cb07cee9ed0c..a078e2e5517d 100644
>> --- a/drivers/usb/host/xhci-pci.c
>> +++ b/drivers/usb/host/xhci-pci.c
>> @@ -284,6 +284,20 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
>>   	if (pdev->vendor == PCI_VENDOR_ID_NEC)
>>   		xhci->quirks |= XHCI_NEC_HOST;
>>   
>> +	if (pdev->vendor == PCI_VENDOR_ID_AMD &&
>> +	    (pdev->device == 0x13ed ||
>> +	     pdev->device == 0x13ee ||
>> +	     pdev->device == 0x148c ||
>> +	     pdev->device == 0x15d4 ||
>> +	     pdev->device == 0x15d5 ||
>> +	     pdev->device == 0x15e0 ||
>> +	     pdev->device == 0x15e1 ||
>> +	     pdev->device == 0x15e5))
> 
> Any need/want to name these pci devices with something we can refer to
> other than a hex value?

Certainly, I'll try to see if device names can be used instead.

> 
> thanks,
> 
> greg k-h

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ