lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20241107-ufs-clk-fix-v1-2-6032ff22a052@linaro.org>
Date: Thu, 07 Nov 2024 11:58:10 +0000
From: Manivannan Sadhasivam via B4 Relay <devnull+manivannan.sadhasivam.linaro.org@...nel.org>
To: Bjorn Andersson <andersson@...nel.org>, 
 Michael Turquette <mturquette@...libre.com>, 
 Stephen Boyd <sboyd@...nel.org>, Konrad Dybcio <konradybcio@...nel.org>, 
 Neil Armstrong <neil.armstrong@...aro.org>
Cc: linux-arm-msm@...r.kernel.org, linux-clk@...r.kernel.org, 
 linux-kernel@...r.kernel.org, Amit Pundir <amit.pundir@...aro.org>, 
 Nitin Rawat <quic_nitirawa@...cinc.com>, 
 Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>, 
 stable@...r.kernel.org
Subject: [PATCH 2/2] clk: qcom: gcc-sm8650: Keep UFS PHY GDSCs ALWAYS_ON

From: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>

In SM8650, UFS PHY GDSCs doesn't support hardware retention. So using
RETAIN_FF_ENABLE is wrong. Moreover, without ALWAYS_ON flag, GDSCs will get
powered down during suspend, causing the UFS PHY to loose its state. And
this will lead to UFS error similar to below during resume:

ufshcd-qcom 1d84000.ufs: ufshcd_uic_hibern8_exit: hibern8 exit failed. ret = 5
ufshcd-qcom 1d84000.ufs: __ufshcd_wl_resume: hibern8 exit failed 5
ufs_device_wlun 0:0:0:49488: ufshcd_wl_resume failed: 5
ufs_device_wlun 0:0:0:49488: PM: dpm_run_callback(): scsi_bus_resume+0x0/0x84 returns 5
ufs_device_wlun 0:0:0:49488: PM: failed to resume async: error 5

Cc: stable@...r.kernel.org # 6.8
Fixes: c58225b7e3d7 ("clk: qcom: add the SM8650 Global Clock Controller driver, part 1")
Suggested-by: Nitin Rawat <quic_nitirawa@...cinc.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
---
 drivers/clk/qcom/gcc-sm8650.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/qcom/gcc-sm8650.c b/drivers/clk/qcom/gcc-sm8650.c
index fd9d6544bdd5..ddc38caf7160 100644
--- a/drivers/clk/qcom/gcc-sm8650.c
+++ b/drivers/clk/qcom/gcc-sm8650.c
@@ -3480,7 +3480,7 @@ static struct gdsc ufs_phy_gdsc = {
 		.name = "ufs_phy_gdsc",
 	},
 	.pwrsts = PWRSTS_OFF_ON,
-	.flags = POLL_CFG_GDSCR | RETAIN_FF_ENABLE,
+	.flags = POLL_CFG_GDSCR | ALWAYS_ON,
 };
 
 static struct gdsc ufs_mem_phy_gdsc = {
@@ -3489,7 +3489,7 @@ static struct gdsc ufs_mem_phy_gdsc = {
 		.name = "ufs_mem_phy_gdsc",
 	},
 	.pwrsts = PWRSTS_OFF_ON,
-	.flags = POLL_CFG_GDSCR | RETAIN_FF_ENABLE,
+	.flags = POLL_CFG_GDSCR | ALWAYS_ON,
 };
 
 static struct gdsc usb30_prim_gdsc = {

-- 
2.25.1



Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ