[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20241108163455.885-4-SkyLake.Huang@mediatek.com>
Date: Sat, 9 Nov 2024 00:34:53 +0800
From: Sky Huang <SkyLake.Huang@...iatek.com>
To: Andrew Lunn <andrew@...n.ch>, Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>, "David S. Miller"
<davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>, Jakub Kicinski
<kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>, Daniel Golle
<daniel@...rotopia.org>, Qingfang Deng <dqfext@...il.com>, SkyLake Huang
<SkyLake.Huang@...iatek.com>, Matthias Brugger <matthias.bgg@...il.com>,
AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>, Simon
Horman <horms@...nel.org>, <linux-kernel@...r.kernel.org>,
<netdev@...r.kernel.org>, <linux-arm-kernel@...ts.infradead.org>,
<linux-mediatek@...ts.infradead.org>
CC: Steven Liu <Steven.Liu@...iatek.com>, SkyLake.Huang
<skylake.huang@...iatek.com>
Subject: [PATCH net-next v3 3/5] net: phy: mediatek: Improve readability of mtk-phy-lib.c's mtk_phy_led_hw_ctrl_set()
From: "SkyLake.Huang" <skylake.huang@...iatek.com>
This patch removes parens around TRIGGER_NETDEV_RX/TRIGGER_NETDEV_TX in
mtk_phy_led_hw_ctrl_set(), which improves readability.
Reviewed-by: Andrew Lunn <andrew@...n.ch>
Signed-off-by: SkyLake.Huang <skylake.huang@...iatek.com>
---
drivers/net/phy/mediatek/mtk-phy-lib.c | 44 ++++++++++++++------------
1 file changed, 24 insertions(+), 20 deletions(-)
diff --git a/drivers/net/phy/mediatek/mtk-phy-lib.c b/drivers/net/phy/mediatek/mtk-phy-lib.c
index 34b0957..8d795bc 100644
--- a/drivers/net/phy/mediatek/mtk-phy-lib.c
+++ b/drivers/net/phy/mediatek/mtk-phy-lib.c
@@ -129,29 +129,33 @@ int mtk_phy_led_hw_ctrl_set(struct phy_device *phydev, u8 index,
on |= MTK_PHY_LED_ON_LINK2500;
if (rules & BIT(TRIGGER_NETDEV_RX)) {
- blink |= (on & on_set) ?
- (((on & MTK_PHY_LED_ON_LINK10) ?
- MTK_PHY_LED_BLINK_10RX : 0) |
- ((on & MTK_PHY_LED_ON_LINK100) ?
- MTK_PHY_LED_BLINK_100RX : 0) |
- ((on & MTK_PHY_LED_ON_LINK1000) ?
- MTK_PHY_LED_BLINK_1000RX : 0) |
- ((on & MTK_PHY_LED_ON_LINK2500) ?
- MTK_PHY_LED_BLINK_2500RX : 0)) :
- rx_blink_set;
+ if (on & on_set) {
+ if (on & MTK_PHY_LED_ON_LINK10)
+ blink |= MTK_PHY_LED_BLINK_10RX;
+ if (on & MTK_PHY_LED_ON_LINK100)
+ blink |= MTK_PHY_LED_BLINK_100RX;
+ if (on & MTK_PHY_LED_ON_LINK1000)
+ blink |= MTK_PHY_LED_BLINK_1000RX;
+ if (on & MTK_PHY_LED_ON_LINK2500)
+ blink |= MTK_PHY_LED_BLINK_2500RX;
+ } else {
+ blink |= rx_blink_set;
+ }
}
if (rules & BIT(TRIGGER_NETDEV_TX)) {
- blink |= (on & on_set) ?
- (((on & MTK_PHY_LED_ON_LINK10) ?
- MTK_PHY_LED_BLINK_10TX : 0) |
- ((on & MTK_PHY_LED_ON_LINK100) ?
- MTK_PHY_LED_BLINK_100TX : 0) |
- ((on & MTK_PHY_LED_ON_LINK1000) ?
- MTK_PHY_LED_BLINK_1000TX : 0) |
- ((on & MTK_PHY_LED_ON_LINK2500) ?
- MTK_PHY_LED_BLINK_2500TX : 0)) :
- tx_blink_set;
+ if (on & on_set) {
+ if (on & MTK_PHY_LED_ON_LINK10)
+ blink |= MTK_PHY_LED_BLINK_10TX;
+ if (on & MTK_PHY_LED_ON_LINK100)
+ blink |= MTK_PHY_LED_BLINK_100TX;
+ if (on & MTK_PHY_LED_ON_LINK1000)
+ blink |= MTK_PHY_LED_BLINK_1000TX;
+ if (on & MTK_PHY_LED_ON_LINK2500)
+ blink |= MTK_PHY_LED_BLINK_2500TX;
+ } else {
+ blink |= tx_blink_set;
+ }
}
if (blink || on)
--
2.45.2
Powered by blists - more mailing lists