[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20241108173334.2973603-1-mordan@ispras.ru>
Date: Fri, 8 Nov 2024 20:33:34 +0300
From: Vitalii Mordan <mordan@...ras.ru>
To: Alexandre Torgue <alexandre.torgue@...s.st.com>
Cc: Vitalii Mordan <mordan@...ras.ru>,
Jose Abreu <joabreu@...opsys.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
netdev@...r.kernel.org,
linux-stm32@...md-mailman.stormreply.com,
linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org,
lvc-project@...uxtesting.org,
Fedor Pchelkin <pchelkin@...ras.ru>,
Alexey Khoroshilov <khoroshilov@...ras.ru>,
Vadim Mutilin <mutilin@...ras.ru>
Subject: [PATCH net v2]: stmmac: dwmac-intel-plat: fix call balance of tx_clk handling routines
If the clock dwmac->tx_clk was not enabled in intel_eth_plat_probe,
it should not be disabled in any path.
Conversely, if it was enabled in intel_eth_plat_probe, it must be disabled
in all error paths to ensure proper cleanup.
Found by Linux Verification Center (linuxtesting.org) with Klever.
Fixes: 9efc9b2b04c7 ("net: stmmac: Add dwmac-intel-plat for GBE driver")
Signed-off-by: Vitalii Mordan <mordan@...ras.ru>
---
v2: Unwind using a goto label, as per Simon Horman's request.
.../stmicro/stmmac/dwmac-intel-plat.c | 25 +++++++++++++------
1 file changed, 17 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel-plat.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel-plat.c
index d68f0c4e7835..9739bc9867c5 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel-plat.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel-plat.c
@@ -108,7 +108,12 @@ static int intel_eth_plat_probe(struct platform_device *pdev)
if (IS_ERR(dwmac->tx_clk))
return PTR_ERR(dwmac->tx_clk);
- clk_prepare_enable(dwmac->tx_clk);
+ ret = clk_prepare_enable(dwmac->tx_clk);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "Failed to enable tx_clk\n");
+ return ret;
+ }
/* Check and configure TX clock rate */
rate = clk_get_rate(dwmac->tx_clk);
@@ -119,7 +124,7 @@ static int intel_eth_plat_probe(struct platform_device *pdev)
if (ret) {
dev_err(&pdev->dev,
"Failed to set tx_clk\n");
- return ret;
+ goto err_tx_clk_disable;
}
}
}
@@ -133,7 +138,7 @@ static int intel_eth_plat_probe(struct platform_device *pdev)
if (ret) {
dev_err(&pdev->dev,
"Failed to set clk_ptp_ref\n");
- return ret;
+ goto err_tx_clk_disable;
}
}
}
@@ -149,12 +154,15 @@ static int intel_eth_plat_probe(struct platform_device *pdev)
}
ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
- if (ret) {
- clk_disable_unprepare(dwmac->tx_clk);
- return ret;
- }
+ if (ret)
+ goto err_tx_clk_disable;
return 0;
+
+err_tx_clk_disable:
+ if (dwmac->data->tx_clk_en)
+ clk_disable_unprepare(dwmac->tx_clk);
+ return ret;
}
static void intel_eth_plat_remove(struct platform_device *pdev)
@@ -162,7 +170,8 @@ static void intel_eth_plat_remove(struct platform_device *pdev)
struct intel_dwmac *dwmac = get_stmmac_bsp_priv(&pdev->dev);
stmmac_pltfr_remove(pdev);
- clk_disable_unprepare(dwmac->tx_clk);
+ if (dwmac->data->tx_clk_en)
+ clk_disable_unprepare(dwmac->tx_clk);
}
static struct platform_driver intel_eth_plat_driver = {
--
2.25.1
Powered by blists - more mailing lists