lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20241108142946.2286098-3-danishanwar@ti.com>
Date: Fri, 8 Nov 2024 19:59:46 +0530
From: MD Danish Anwar <danishanwar@...com>
To: <conor+dt@...nel.org>, <krzk+dt@...nel.org>, <robh@...nel.org>,
        <ssantosh@...nel.org>, <nm@...com>
CC: <devicetree@...r.kernel.org>, <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>, <s-anna@...com>, <kristo@...nel.org>,
        <vigneshr@...com>, <srk@...com>, Roger Quadros <rogerq@...nel.org>,
        <danishanwar@...com>
Subject: [PATCH v2 2/2] arm64: dts: ti: k3-am64-main: Switch ICSSG clock to core clock

ICSSG currently uses ICSSG_ICLK (clk id 20) which operates at 250MHz.
Switch ICSSG clock to ICSSG_CORE clock (clk id 0) which operates at
333MHz.

ICSSG_CORE clock will help get the most out of ICSSG as more cycles are
needed to fully support all ICSSG features.

This commit also changes assigned-clock-parents of coreclk-mux to
ICSSG_CORE clock from ICSSG_ICLK.

Performance update in dual mac mode
  With ICSSG_CORE Clk @ 333MHz
    Tx throughput - 934 Mbps
    Rx throuhput - 914 Mbps,

  With ICSSG_ICLK clk @ 250MHz,
    Tx throughput - 920 Mbps
    Rx throughput - 706 Mbps

Signed-off-by: MD Danish Anwar <danishanwar@...com>
---
 arch/arm64/boot/dts/ti/k3-am64-main.dtsi | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
index c66289a4362b..ceceee2affd9 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
@@ -1227,6 +1227,10 @@ icssg0: icssg@...00000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x0 0x00 0x30000000 0x80000>;
+		clocks = <&k3_clks 81 0>,  /* icssg0_core_clk */
+			 <&k3_clks 81 20>; /* icssg0_iclk */
+		assigned-clocks = <&k3_clks 81 0>;
+		assigned-clock-parents = <&k3_clks 81 2>;
 
 		icssg0_mem: memories@0 {
 			reg = <0x0 0x2000>,
@@ -1252,7 +1256,7 @@ icssg0_coreclk_mux: coreclk-mux@3c {
 					clocks = <&k3_clks 81 0>,  /* icssg0_core_clk */
 						 <&k3_clks 81 20>; /* icssg0_iclk */
 					assigned-clocks = <&icssg0_coreclk_mux>;
-					assigned-clock-parents = <&k3_clks 81 20>;
+					assigned-clock-parents = <&k3_clks 81 0>;
 				};
 
 				icssg0_iepclk_mux: iepclk-mux@30 {
@@ -1397,6 +1401,10 @@ icssg1: icssg@...80000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x0 0x00 0x30080000 0x80000>;
+		clocks = <&k3_clks 82 0>,   /* icssg1_core_clk */
+			 <&k3_clks 82 20>;  /* icssg1_iclk */
+		assigned-clocks = <&k3_clks 82 0>;
+		assigned-clock-parents = <&k3_clks 82 2>;
 
 		icssg1_mem: memories@0 {
 			reg = <0x0 0x2000>,
@@ -1422,7 +1430,7 @@ icssg1_coreclk_mux: coreclk-mux@3c {
 					clocks = <&k3_clks 82 0>,   /* icssg1_core_clk */
 						 <&k3_clks 82 20>;  /* icssg1_iclk */
 					assigned-clocks = <&icssg1_coreclk_mux>;
-					assigned-clock-parents = <&k3_clks 82 20>;
+					assigned-clock-parents = <&k3_clks 82 0>;
 				};
 
 				icssg1_iepclk_mux: iepclk-mux@30 {
-- 
2.34.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ