linux-kernel - Re: [PATCH v9 2/4] mips: dts: realtek: Add syscon-reboot node

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <ZzNsiu+rbYs7l9Wb@alpha.franken.de>
Date: Tue, 12 Nov 2024 15:56:10 +0100
From: Thomas Bogendoerfer <tsbogend@...ha.franken.de>
To: Chris Packham <chris.packham@...iedtelesis.co.nz>
Cc: lee@...nel.org, robh@...nel.org, krzk+dt@...nel.org,
	conor+dt@...nel.org, andi.shyti@...nel.org,
	devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
	linux-mips@...r.kernel.org, linux-i2c@...r.kernel.org
Subject: Re: [PATCH v9 2/4] mips: dts: realtek: Add syscon-reboot node

On Wed, Nov 06, 2024 at 01:18:33PM +1300, Chris Packham wrote:
> The board level reset on systems using the RTL9302 can be driven via the
> switch. Use a syscon-reboot node to represent this.
> 
> Signed-off-by: Chris Packham <chris.packham@...iedtelesis.co.nz>
> ---
> 
> Notes:
>     Changes in v9:
>     - None
>     Changes in v8:
>     - None
>     Changes in v7:
>     - None
>     Changes in v6:
>     - Drop wildcard compatible
>     Changes in v5:
>     - Krzysztof did technically give a r-by on v4 but given the changes to
>       the rest of the series I haven't included it.
>     - Use reg instead of offset
>     - Add a rtl9302c.dtsi for the specific chip which pulls in the generic
>       rtl930x.dtsi and updates a few of the compatibles on the way through.
>     - Update Cameo board to use rtl9302c.dtsi
>     Changes in v4:
>     - None
>     Changes in v3:
>     - None
>     Changes in v2:
>     - drop redundant status = "okay"
> 
>  .../dts/realtek/cameo-rtl9302c-2x-rtl8224-2xge.dts  |  2 +-
>  arch/mips/boot/dts/realtek/rtl9302c.dtsi            |  7 +++++++
>  arch/mips/boot/dts/realtek/rtl930x.dtsi             | 13 +++++++++++++
>  3 files changed, 21 insertions(+), 1 deletion(-)
>  create mode 100644 arch/mips/boot/dts/realtek/rtl9302c.dtsi

applied to mips-next.

Thomas.

-- 
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea.                                                [ RFC1925, 2.3 ]