[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20241112233609.GA1868317@bhelgaas>
Date: Tue, 12 Nov 2024 17:36:09 -0600
From: Bjorn Helgaas <helgaas@...nel.org>
To: Krishna chaitanya chundru <quic_krichai@...cinc.com>
Cc: andersson@...nel.org, Bjorn Helgaas <bhelgaas@...gle.com>,
Lorenzo Pieralisi <lpieralisi@...nel.org>,
Krzysztof WilczyĆski <kw@...ux.com>,
Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>,
cros-qcom-dts-watchers@...omium.org,
Jingoo Han <jingoohan1@...il.com>,
Bartosz Golaszewski <brgl@...ev.pl>, quic_vbadigan@...cinc.com,
linux-arm-msm@...r.kernel.org, linux-pci@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3 5/6] PCI: qcom: Add support for host_stop_link() &
host_start_link()
On Tue, Nov 12, 2024 at 08:31:37PM +0530, Krishna chaitanya chundru wrote:
> For the switches like QPS615 which needs to configure it before
> the PCIe link is established.
>
> If the link is up, the boatloader might powered and configured the
> endpoint/switch already. In that case don't touch PCIe link else
> assert the PERST# and disable LTSSM bit so that PCIe controller
> will not participate in the link training as part of host_stop_link().
s/boatloader/bootloader/
s/might powered/might have powered/ ?
> De-assert the PERST# and enable LTSSM bit back in host_start_link().
>
> Introduce ltssm_disable function op to stop the link training.
Powered by blists - more mailing lists