| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20241112044807.623-1-selvarasu.g@samsung.com>
Date: Tue, 12 Nov 2024 10:18:02 +0530
From: Selvarasu Ganesan <selvarasu.g@...sung.com>
To: Thinh.Nguyen@...opsys.com, gregkh@...uxfoundation.org,
quic_akakum@...cinc.com, linux-usb@...r.kernel.org,
linux-kernel@...r.kernel.org, stern@...land.harvard.edu
Cc: jh0801.jung@...sung.com, dh10.jung@...sung.com, naushad@...sung.com,
akash.m5@...sung.com, rc93.raju@...sung.com, taehyun.cho@...sung.com,
hongpooh.kim@...sung.com, eomji.oh@...sung.com, shijie.cai@...sung.com,
alim.akhtar@...sung.com, Selvarasu Ganesan <selvarasu.g@...sung.com>,
stable@...r.kernel.org
Subject: [PATCH v3] usb: dwc3: gadget: Add missing check for single port RAM
in TxFIFO resizing logic
The existing implementation of the TxFIFO resizing logic only supports
scenarios where more than one port RAM is used. However, there is a need
to resize the TxFIFO in USB2.0-only mode where only a single port RAM is
available. This commit introduces the necessary changes to support
TxFIFO resizing in such scenarios by adding a missing check for single
port RAM.
This fix addresses certain platform configurations where the existing
TxFIFO resizing logic does not work properly due to the absence of
support for single port RAM. By adding this missing check, we ensure
that the TxFIFO resizing logic works correctly in all scenarios,
including those with a single port RAM.
Fixes: 9f607a309fbe ("usb: dwc3: Resize TX FIFOs to meet EP bursting requirements")
Cc: stable@...r.kernel.org # 6.12.x: fad16c82: usb: dwc3: gadget: Refine the logic for resizing Tx FIFOs
Signed-off-by: Selvarasu Ganesan <selvarasu.g@...sung.com>
---
Changes in v3:
- Updated the $subject and commit message.
- Added Fixes tag, and addressed some minor comments from reviewer .
- Link to v2: https://lore.kernel.org/linux-usb/20241111142049.604-1-selvarasu.g@samsung.com/
Changes in v2:
- Removed the code change that limits the number of FIFOs for bulk EP,
as plan to address this issue in a separate patch.
- Renamed the variable spram_type to is_single_port_ram for better
understanding.
- Link to v1: https://lore.kernel.org/lkml/20241107104040.502-1-selvarasu.g@samsung.com/
---
drivers/usb/dwc3/core.h | 4 +++
drivers/usb/dwc3/gadget.c | 54 +++++++++++++++++++++++++++++++++------
2 files changed, 50 insertions(+), 8 deletions(-)
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index eaa55c0cf62f..8306b39e5c64 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -915,6 +915,7 @@ struct dwc3_hwparams {
#define DWC3_MODE(n) ((n) & 0x7)
/* HWPARAMS1 */
+#define DWC3_SPRAM_TYPE(n) (((n) >> 23) & 1)
#define DWC3_NUM_INT(n) (((n) & (0x3f << 15)) >> 15)
/* HWPARAMS3 */
@@ -925,6 +926,9 @@ struct dwc3_hwparams {
#define DWC3_NUM_IN_EPS(p) (((p)->hwparams3 & \
(DWC3_NUM_IN_EPS_MASK)) >> 18)
+/* HWPARAMS6 */
+#define DWC3_RAM0_DEPTH(n) (((n) & (0xffff0000)) >> 16)
+
/* HWPARAMS7 */
#define DWC3_RAM1_DEPTH(n) ((n) & 0xffff)
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 2fed2aa01407..6101e5467b08 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -687,6 +687,44 @@ static int dwc3_gadget_calc_tx_fifo_size(struct dwc3 *dwc, int mult)
return fifo_size;
}
+/**
+ * dwc3_gadget_calc_ram_depth - calculates the ram depth for txfifo
+ * @dwc: pointer to the DWC3 context
+ */
+static int dwc3_gadget_calc_ram_depth(struct dwc3 *dwc)
+{
+ int ram_depth;
+ int fifo_0_start;
+ bool is_single_port_ram;
+
+ /* Check supporting RAM type by HW */
+ is_single_port_ram = DWC3_SPRAM_TYPE(dwc->hwparams.hwparams1);
+
+ /*
+ * If a single port RAM is utilized, then allocate TxFIFOs from
+ * RAM0. otherwise, allocate them from RAM1.
+ */
+ ram_depth = is_single_port_ram ? DWC3_RAM0_DEPTH(dwc->hwparams.hwparams6) :
+ DWC3_RAM1_DEPTH(dwc->hwparams.hwparams7);
+
+ /*
+ * In a single port RAM configuration, the available RAM is shared
+ * between the RX and TX FIFOs. This means that the txfifo can begin
+ * at a non-zero address.
+ */
+ if (is_single_port_ram) {
+ u32 reg;
+
+ /* Check if TXFIFOs start at non-zero addr */
+ reg = dwc3_readl(dwc->regs, DWC3_GTXFIFOSIZ(0));
+ fifo_0_start = DWC3_GTXFIFOSIZ_TXFSTADDR(reg);
+
+ ram_depth -= (fifo_0_start >> 16);
+ }
+
+ return ram_depth;
+}
+
/**
* dwc3_gadget_clear_tx_fifos - Clears txfifo allocation
* @dwc: pointer to the DWC3 context
@@ -753,7 +791,7 @@ static int dwc3_gadget_resize_tx_fifos(struct dwc3_ep *dep)
{
struct dwc3 *dwc = dep->dwc;
int fifo_0_start;
- int ram1_depth;
+ int ram_depth;
int fifo_size;
int min_depth;
int num_in_ep;
@@ -773,7 +811,7 @@ static int dwc3_gadget_resize_tx_fifos(struct dwc3_ep *dep)
if (dep->flags & DWC3_EP_TXFIFO_RESIZED)
return 0;
- ram1_depth = DWC3_RAM1_DEPTH(dwc->hwparams.hwparams7);
+ ram_depth = dwc3_gadget_calc_ram_depth(dwc);
switch (dwc->gadget->speed) {
case USB_SPEED_SUPER_PLUS:
@@ -809,7 +847,7 @@ static int dwc3_gadget_resize_tx_fifos(struct dwc3_ep *dep)
/* Reserve at least one FIFO for the number of IN EPs */
min_depth = num_in_ep * (fifo + 1);
- remaining = ram1_depth - min_depth - dwc->last_fifo_depth;
+ remaining = ram_depth - min_depth - dwc->last_fifo_depth;
remaining = max_t(int, 0, remaining);
/*
* We've already reserved 1 FIFO per EP, so check what we can fit in
@@ -835,9 +873,9 @@ static int dwc3_gadget_resize_tx_fifos(struct dwc3_ep *dep)
dwc->last_fifo_depth += DWC31_GTXFIFOSIZ_TXFDEP(fifo_size);
/* Check fifo size allocation doesn't exceed available RAM size. */
- if (dwc->last_fifo_depth >= ram1_depth) {
+ if (dwc->last_fifo_depth >= ram_depth) {
dev_err(dwc->dev, "Fifosize(%d) > RAM size(%d) %s depth:%d\n",
- dwc->last_fifo_depth, ram1_depth,
+ dwc->last_fifo_depth, ram_depth,
dep->endpoint.name, fifo_size);
if (DWC3_IP_IS(DWC3))
fifo_size = DWC3_GTXFIFOSIZ_TXFDEP(fifo_size);
@@ -3090,7 +3128,7 @@ static int dwc3_gadget_check_config(struct usb_gadget *g)
struct dwc3 *dwc = gadget_to_dwc(g);
struct usb_ep *ep;
int fifo_size = 0;
- int ram1_depth;
+ int ram_depth;
int ep_num = 0;
if (!dwc->do_fifo_resize)
@@ -3113,8 +3151,8 @@ static int dwc3_gadget_check_config(struct usb_gadget *g)
fifo_size += dwc->max_cfg_eps;
/* Check if we can fit a single fifo per endpoint */
- ram1_depth = DWC3_RAM1_DEPTH(dwc->hwparams.hwparams7);
- if (fifo_size > ram1_depth)
+ ram_depth = dwc3_gadget_calc_ram_depth(dwc);
+ if (fifo_size > ram_depth)
return -ENOMEM;
return 0;
--
2.17.1
Powered by blists - more mailing lists