[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAMuHMdVZB1iiM5K1VWch5HrohRz+HYu2z1KBXDh2e01TTPgOWQ@mail.gmail.com>
Date: Tue, 12 Nov 2024 09:21:13 +0100
From: Geert Uytterhoeven <geert@...ux-m68k.org>
To: Josua Mayer <josua@...id-run.com>
Cc: Nishanth Menon <nm@...com>, Tero Kristo <kristo@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>,
Vignesh Raghavendra <vigneshr@...com>,
"linux-arm-kernel@...ts.infradead.org" <linux-arm-kernel@...ts.infradead.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] arm64: dts: ti: k3-am642-hummingboard-t: convert overlay
to board dts
Hi Josua,
On Tue, Nov 12, 2024 at 6:05 AM Josua Mayer <josua@...id-run.com> wrote:
> Am 01.11.24 um 15:16 schrieb Josua Mayer:
> > SolidRun HummingBoard-T has two options for M.2 connector, supporting
> > either PCI-E or USB-3.1 Gen 1 - depending on configuration of a mux
> > on the serdes lane.
> > The required configurations in device-tree were modeled as overlays.
> >
> > The USB-3.1 overlay uses /delete-property/ to unset a boolean property
> > on the usb controller limiting it to USB-2.0 by default.
> > Overlays can not delete a property from the base dtb, therefore this
> > overlay is at this time useless.
> >
> > Convert both overlays into full dts by including the base board dts.
> > While the pcie overlay was functional, both are converted for a
> > consistent user experience when selecting between the two mutually
> > exclusive configurations.
> >
> > Reported-by: Geert Uytterhoeven <geert@...ux-m68k.org>
> > Closes: https://lore.kernel.org/linux-devicetree/CAMuHMdXTgpTnJ9U7egC2XjFXXNZ5uiY1O+WxNd6LPJW5Rs5KTw@mail.gmail.com
> > Fixes: bbef42084cc1 ("arm64: dts: ti: hummingboard-t: add overlays for m.2 pci-e and usb-3")
> > Signed-off-by: Josua Mayer <josua@...id-run.com>
> > ---
> > arch/arm64/boot/dts/ti/Makefile | 4 ----
> > ...gboard-t-pcie.dtso => k3-am642-hummingboard-t-pcie.dts} | 14 ++++++++------
> > ...gboard-t-usb3.dtso => k3-am642-hummingboard-t-usb3.dts} | 13 ++++++++-----
> > 3 files changed, 16 insertions(+), 15 deletions(-)
> >
> Please hold off on this patch for the moment,
> Thanks to some comments from Geert I wish to submit an alternative
> solution via separate patch-set, for further discussion.
As you state in the other patch set "I do not consider it ready for
current merge window", it may be worthwhile to not hold off?
It can always be reverted whenif the alternative solution is accepted.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@...ux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
Powered by blists - more mailing lists