| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID:
<FR3P281MB17577C0094A72EC546A21AC7CE5A2@FR3P281MB1757.DEUP281.PROD.OUTLOOK.COM>
Date: Wed, 13 Nov 2024 19:28:01 +0000
From: Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@....com>
To: Frank Li <Frank.Li@....com>, Jonathan Cameron <jic23@...nel.org>,
Lars-Peter Clausen <lars@...afoo.de>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>
CC: "linux-iio@...r.kernel.org" <linux-iio@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Han Xu
<han.xu@....com>
Subject: Re: [PATCH 2/2] iio: gyro: Add support for iam20380 sensor
Hello Frank,
thanks for the patches, but there are several problems.
I think there is a misunderstanding about the inv_mpu6050_chip_config structure. The values here are only the default value at startup, it doesn't define if accel/gyro or mag is present or not. It is just for setting values at startup.
For disabling accel, you need to change the IIO channels by defining a new iio_chan_spec table with only gyro channels. Otherwise, it will still be possible to enable accel in the iio device.
You're also missing SPI support. You need to add the ids and compatible definition also in the inv_mpu_spi.c file.
Thanks,
JB
________________________________________
From: Frank Li <Frank.Li@....com>
Sent: Wednesday, November 13, 2024 17:05
To: Jean-Baptiste Maneyrol <Jean-Baptiste.Maneyrol@....com>; Jonathan Cameron <jic23@...nel.org>; Lars-Peter Clausen <lars@...afoo.de>; Rob Herring <robh@...nel.org>; Krzysztof Kozlowski <krzk+dt@...nel.org>; Conor Dooley <conor+dt@...nel.org>
Cc: linux-iio@...r.kernel.org <linux-iio@...r.kernel.org>; devicetree@...r.kernel.org <devicetree@...r.kernel.org>; linux-kernel@...r.kernel.org <linux-kernel@...r.kernel.org>; Frank Li <Frank.Li@....com>; Han Xu <han.xu@....com>
Subject: [PATCH 2/2] iio: gyro: Add support for iam20380 sensor
This Message Is From an External Sender
This message came from outside your organization.
From: Han Xu <han.xu@....com>
Add support for the Invensense IAM20380 sensor to the MPU6050 driver. It is
similar to the IAM20680. But IAM20380 only supports gyro and WHOAMI
register data is difference.
Signed-off-by: Han Xu <han.xu@....com>
Signed-off-by: Frank Li <Frank.Li@....com>
---
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 25 +++++++++++++++++++++++++
drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c | 6 ++++++
drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h | 2 ++
3 files changed, 33 insertions(+)
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
index 40271352b02cf..f6e41ee14298a 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
@@ -140,6 +140,23 @@ static const struct inv_mpu6050_chip_config chip_config_6500 = {
.user_ctrl = 0,
};
+static const struct inv_mpu6050_chip_config chip_config_6500_gyro = {
+ .clk = INV_CLK_PLL,
+ .fsr = INV_MPU6050_FSR_2000DPS,
+ .lpf = INV_MPU6050_FILTER_20HZ,
+ .divider = INV_MPU6050_FIFO_RATE_TO_DIVIDER(50),
+ .gyro_en = true,
+ .accl_en = false,
+ .temp_en = false,
+ .magn_en = false,
+ .gyro_fifo_enable = false,
+ .accl_fifo_enable = false,
+ .temp_fifo_enable = false,
+ .magn_fifo_enable = false,
+ .accl_fs = INV_MPU6050_FS_02G,
+ .user_ctrl = 0,
+};
+
/* Indexed by enum inv_devices */
static const struct inv_mpu6050_hw hw_info[] = {
{
@@ -277,6 +294,14 @@ static const struct inv_mpu6050_hw hw_info[] = {
.temp = {INV_ICM20608_TEMP_OFFSET, INV_ICM20608_TEMP_SCALE},
.startup_time = {INV_ICM20690_GYRO_STARTUP_TIME, INV_ICM20690_ACCEL_STARTUP_TIME},
},
+ { .whoami = INV_IAM20380_WHOAMI_VALUE,
+ .name = "IAM20380",
+ .reg = ®_set_6500,
+ .config = &chip_config_6500_gyro,
+ .fifo_size = 512,
+ .temp = {INV_ICM20608_TEMP_OFFSET, INV_ICM20608_TEMP_SCALE},
+ .startup_time = {INV_MPU6500_GYRO_STARTUP_TIME, INV_MPU6500_ACCEL_STARTUP_TIME},
+ },
{
.whoami = INV_IAM20680_WHOAMI_VALUE,
.name = "IAM20680",
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
index 7a5926ba6b97d..62f7d16c2ddcb 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
@@ -34,6 +34,7 @@ static bool inv_mpu_i2c_aux_bus(struct device *dev)
case INV_ICM20689:
case INV_ICM20600:
case INV_ICM20602:
+ case INV_IAM20380:
case INV_IAM20680:
/* no i2c auxiliary bus on the chip */
return false;
@@ -187,6 +188,7 @@ static const struct i2c_device_id inv_mpu_id[] = {
{"icm20600", INV_ICM20600},
{"icm20602", INV_ICM20602},
{"icm20690", INV_ICM20690},
+ {"iam20380", INV_IAM20380},
{"iam20680", INV_IAM20680},
{"iam20680hp", INV_IAM20680HP},
{"iam20680ht", INV_IAM20680HT},
@@ -252,6 +254,10 @@ static const struct of_device_id inv_of_match[] = {
.compatible = "invensense,icm20690",
.data = (void *)INV_ICM20690
},
+ {
+ .compatible = "invensense,iam20380",
+ .data = (void *)INV_IAM20380
+ },
{
.compatible = "invensense,iam20680",
.data = (void *)INV_IAM20680
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
index a6862cf426396..211901f8b8eb6 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
@@ -84,6 +84,7 @@ enum inv_devices {
INV_ICM20600,
INV_ICM20602,
INV_ICM20690,
+ INV_IAM20380,
INV_IAM20680,
INV_IAM20680HP,
INV_IAM20680HT,
@@ -425,6 +426,7 @@ struct inv_mpu6050_state {
#define INV_ICM20600_WHOAMI_VALUE 0x11
#define INV_ICM20602_WHOAMI_VALUE 0x12
#define INV_ICM20690_WHOAMI_VALUE 0x20
+#define INV_IAM20380_WHOAMI_VALUE 0xB5
#define INV_IAM20680_WHOAMI_VALUE 0xA9
#define INV_IAM20680HP_WHOAMI_VALUE 0xF8
#define INV_IAM20680HT_WHOAMI_VALUE 0xFA
--
2.34.1
Powered by blists - more mailing lists