linux-kernel - [PATCH net-next v2 0/8] net: lan969x: add RGMII support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20241113-sparx5-lan969x-switch-driver-4-v2-0-0db98ac096d1@microchip.com>
Date: Wed, 13 Nov 2024 22:11:08 +0100
From: Daniel Machon <daniel.machon@...rochip.com>
To: <UNGLinuxDriver@...rochip.com>, Andrew Lunn <andrew+netdev@...n.ch>,
	"David S. Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>, "Lars
 Povlsen" <lars.povlsen@...rochip.com>, Steen Hegelund
	<Steen.Hegelund@...rochip.com>, Horatiu Vultur
	<horatiu.vultur@...rochip.com>, Russell King <linux@...linux.org.uk>,
	<jacob.e.keller@...el.com>, <robh@...nel.org>, <krzk+dt@...nel.org>,
	<conor+dt@...nel.org>
CC: <devicetree@...r.kernel.org>, <netdev@...r.kernel.org>,
	<linux-kernel@...r.kernel.org>, <linux-arm-kernel@...ts.infradead.org>
Subject: [PATCH net-next v2 0/8] net: lan969x: add RGMII support

== Description:

This series is the fourth of a multi-part series, that prepares and adds
support for the new lan969x switch driver.

The upstreaming efforts is split into multiple series (might change a
bit as we go along):

        1) Prepare the Sparx5 driver for lan969x (merged)

        2) Add support for lan969x (same basic features as Sparx5
           provides excl. FDMA and VCAP, merged).

        3) Add lan969x VCAP functionality (merged).

    --> 4) Add RGMII support.

        5) Add FDMA support.

== RGMII support:

The lan969x switch device includes two RGMII interfaces (port 28 and 29)
supporting data speeds of 1 Gbps, 100 Mbps and 10 Mbps.

Details are in the commit description of the patches.

== Patch breakdown:

Patch #1 does some preparation work.

Patch #2 adds new function: is_port_rgmii() to the match data ops.

Patch #3 uses the is_port_rgmii() in a number of places.

Patch #4 uses the phy_interface_mode_is_rgmii() in a number of places.

Patch #5 adds checks for RGMII PHY modes in sparx5_verify_speeds().

Patch #6 adds registers required to configure RGMII.

Patch #7 adds RGMII implementation.

Patch #8 document RGMII delays.

To: UNGLinuxDriver@...rochip.com
To: Andrew Lunn <andrew+netdev@...n.ch>
To: David S. Miller <davem@...emloft.net>
To: Eric Dumazet <edumazet@...gle.com>
To: Jakub Kicinski <kuba@...nel.org>
To: Paolo Abeni <pabeni@...hat.com>
To: Lars Povlsen <lars.povlsen@...rochip.com>
To: Steen Hegelund <Steen.Hegelund@...rochip.com>
To: Horatiu Vultur <horatiu.vultur@...rochip.com>
To: Russell King <linux@...linux.org.uk>
To: jacob.e.keller@...el.com
To: robh@...nel.org
To: krzk+dt@...nel.org
To: conor+dt@...nel.org
Cc: devicetree@...r.kernel.org
Cc: netdev@...r.kernel.org
Cc: linux-kernel@...r.kernel.org
Cc: linux-arm-kernel@...ts.infradead.org

Signed-off-by: Daniel Machon <daniel.machon@...rochip.com>
---
Changes in v2:

  Most changes are in patch #7. RGMII implementation has been moved to
  it's own file lan969x_rgmii.c.

  Details:

    - Use ETH_P_8021Q and ETH_P_8021AD instead of the Sparx5 provided
      equivalents (patch #7).
    - Configure MAC delays through "{rx,tx}-internal-delay-ps"
      properties (patch #7).
    - Add selectors for all the phase shifts that the hardware supports
      (instead of only 2.0 ns, patch #7).
    - Add selectors for all the port speeds (instead of only 1000 mbps.)
    - Document RGMII delays in dt-bindings.

  - Link to v1: https://lore.kernel.org/r/20241106-sparx5-lan969x-switch-driver-4-v1-0-f7f7316436bd@microchip.com

---
Daniel Machon (8):
      net: sparx5: do some preparation work
      net: sparx5: add function for RGMII port check
      net: sparx5: use is_port_rgmii() throughout
      net: sparx5: use phy_interface_mode_is_rgmii()
      net: sparx5: verify RGMII speeds
      net: lan969x: add RGMII registers
      net: lan969x: add RGMII implementation
      dt-bindings: net: sparx5: document RGMII MAC delays

 .../bindings/net/microchip,sparx5-switch.yaml      |  20 ++
 drivers/net/ethernet/microchip/lan969x/Makefile    |   2 +-
 drivers/net/ethernet/microchip/lan969x/lan969x.c   |   5 +
 drivers/net/ethernet/microchip/lan969x/lan969x.h   |  10 +
 .../net/ethernet/microchip/lan969x/lan969x_rgmii.c | 237 +++++++++++++++++++++
 .../net/ethernet/microchip/sparx5/sparx5_main.c    |  29 ++-
 .../net/ethernet/microchip/sparx5/sparx5_main.h    |   3 +
 .../ethernet/microchip/sparx5/sparx5_main_regs.h   | 145 +++++++++++++
 .../net/ethernet/microchip/sparx5/sparx5_phylink.c |   3 +
 .../net/ethernet/microchip/sparx5/sparx5_port.c    |  57 +++--
 .../net/ethernet/microchip/sparx5/sparx5_port.h    |   5 +
 11 files changed, 488 insertions(+), 28 deletions(-)
---
base-commit: 12079a59ce52e72a342c49cfacf0281213fd6f32
change-id: 20241104-sparx5-lan969x-switch-driver-4-d59b7820485a

Best regards,
-- 
Daniel Machon <daniel.machon@...rochip.com>