[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-Id: <20241113-b4-j784s4-tps6594-bootph-v4-2-102ddaa1bdc6@redhat.com>
Date: Wed, 13 Nov 2024 10:15:17 +0100
From: Enric Balletbo i Serra <eballetb@...hat.com>
To: Nishanth Menon <nm@...com>, Vignesh Raghavendra <vigneshr@...com>,
Tero Kristo <kristo@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, Andrew Halaney <ajhalaney@...il.com>,
Andrew Halaney <ahalaney@...hat.com>,
Enric Balletbo i Serra <eballetb@...hat.com>, Udit Kumar <u-kumar1@...com>,
Beleswar Padhi <b-padhi@...com>
Subject: [PATCH v4 2/2] arm64: dts: ti: k3-am69-sk: Mark tps659413
regulators as bootph-all
From: Andrew Halaney <ahalaney@...hat.com>
In order for the MCU domain to access this PMIC, a regulator
needs to be marked appropriately otherwise it is not seen by SPL and
therefore not configured.
This is necessary if the MCU domain is to program the TPS6594 MCU ESM
state machine, which is required to wire up the watchdog in a manner
that will reset the board.
Tested-by: Udit Kumar <u-kumar1@...com>
Signed-off-by: Andrew Halaney <ahalaney@...hat.com>
Reviewed-by: Beleswar Padhi <b-padhi@...com>
Signed-off-by: Enric Balletbo i Serra <eballetb@...hat.com>
---
arch/arm64/boot/dts/ti/k3-am69-sk.dts | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am69-sk.dts b/arch/arm64/boot/dts/ti/k3-am69-sk.dts
index 1e36965a14032ca07143230855e04b9549f1d0d1..5f24a1608bdc4fef0610e2ba9a210264e3c4917e 100644
--- a/arch/arm64/boot/dts/ti/k3-am69-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am69-sk.dts
@@ -755,6 +755,7 @@ bucka12: buck12 {
regulator-max-microvolt = <1100000>;
regulator-boot-on;
regulator-always-on;
+ bootph-all;
};
bucka3: buck3 {
@@ -763,6 +764,7 @@ bucka3: buck3 {
regulator-max-microvolt = <850000>;
regulator-boot-on;
regulator-always-on;
+ bootph-all;
};
bucka4: buck4 {
@@ -771,6 +773,7 @@ bucka4: buck4 {
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
+ bootph-all;
};
bucka5: buck5 {
@@ -779,6 +782,7 @@ bucka5: buck5 {
regulator-max-microvolt = <850000>;
regulator-boot-on;
regulator-always-on;
+ bootph-all;
};
ldoa1: ldo1 {
@@ -787,6 +791,7 @@ ldoa1: ldo1 {
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
+ bootph-all;
};
ldoa2: ldo2 {
@@ -795,6 +800,7 @@ ldoa2: ldo2 {
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
+ bootph-all;
};
ldoa3: ldo3 {
@@ -803,6 +809,7 @@ ldoa3: ldo3 {
regulator-max-microvolt = <800000>;
regulator-boot-on;
regulator-always-on;
+ bootph-all;
};
ldoa4: ldo4 {
@@ -811,6 +818,7 @@ ldoa4: ldo4 {
regulator-max-microvolt = <1800000>;
regulator-boot-on;
regulator-always-on;
+ bootph-all;
};
};
};
--
2.47.0
Powered by blists - more mailing lists