| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20241113-j784s4-s2r-pinctrl-v1-1-19aeb62739bc@bootlin.com>
Date: Wed, 13 Nov 2024 11:43:05 +0100
From: Thomas Richard <thomas.richard@...tlin.com>
To: Nishanth Menon <nm@...com>, Vignesh Raghavendra <vigneshr@...com>,
Tero Kristo <kristo@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, gregory.clement@...tlin.com,
thomas.petazzoni@...tlin.com, richard.genoud@...tlin.com, u-kumar1@...com,
Thomas Richard <thomas.richard@...tlin.com>
Subject: [PATCH] arm64: dts: ti: k3-j784s4: use ti,j7200-padconf compatible
Like on j7200, pinctrl contexts shall be saved and restored during
suspend-to-ram.
So use ti,j7200-padconf compatible.
Signed-off-by: Thomas Richard <thomas.richard@...tlin.com>
---
Use ti,j7200-padconf compatible to save and restore pinctrl contexts during
suspend-to-ram.
---
arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi | 6 +++---
arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi | 12 ++++++------
2 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
index e73bb750b09a..b25d9a6aff2c 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-main.dtsi
@@ -230,7 +230,7 @@ main_gpio_intr: interrupt-controller@...000 {
};
main_pmx0: pinctrl@...000 {
- compatible = "pinctrl-single";
+ compatible = "ti,j7200-padconf", "pinctrl-single";
/* Proxy 0 addressing */
reg = <0x00 0x11c000 0x00 0x120>;
#pinctrl-cells = <1>;
@@ -240,7 +240,7 @@ main_pmx0: pinctrl@...000 {
/* TIMERIO pad input CTRLMMR_TIMER*_CTRL registers */
main_timerio_input: pinctrl@...200 {
- compatible = "pinctrl-single";
+ compatible = "ti,j7200-padconf", "pinctrl-single";
reg = <0x00 0x104200 0x00 0x50>;
#pinctrl-cells = <1>;
pinctrl-single,register-width = <32>;
@@ -249,7 +249,7 @@ main_timerio_input: pinctrl@...200 {
/* TIMERIO pad output CTCTRLMMR_TIMERIO*_CTRL registers */
main_timerio_output: pinctrl@...280 {
- compatible = "pinctrl-single";
+ compatible = "ti,j7200-padconf", "pinctrl-single";
reg = <0x00 0x104280 0x00 0x20>;
#pinctrl-cells = <1>;
pinctrl-single,register-width = <32>;
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
index 2c97d1c7ebcd..36341665177f 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-mcu-wakeup.dtsi
@@ -76,7 +76,7 @@ mcu_ram: sram@...00000 {
};
wkup_pmx0: pinctrl@...1c000 {
- compatible = "pinctrl-single";
+ compatible = "ti,j7200-padconf", "pinctrl-single";
/* Proxy 0 addressing */
reg = <0x00 0x4301c000 0x00 0x034>;
#pinctrl-cells = <1>;
@@ -85,7 +85,7 @@ wkup_pmx0: pinctrl@...1c000 {
};
wkup_pmx1: pinctrl@...1c038 {
- compatible = "pinctrl-single";
+ compatible = "ti,j7200-padconf", "pinctrl-single";
/* Proxy 0 addressing */
reg = <0x00 0x4301c038 0x00 0x02c>;
#pinctrl-cells = <1>;
@@ -94,7 +94,7 @@ wkup_pmx1: pinctrl@...1c038 {
};
wkup_pmx2: pinctrl@...1c068 {
- compatible = "pinctrl-single";
+ compatible = "ti,j7200-padconf", "pinctrl-single";
/* Proxy 0 addressing */
reg = <0x00 0x4301c068 0x00 0x120>;
#pinctrl-cells = <1>;
@@ -103,7 +103,7 @@ wkup_pmx2: pinctrl@...1c068 {
};
wkup_pmx3: pinctrl@...1c190 {
- compatible = "pinctrl-single";
+ compatible = "ti,j7200-padconf", "pinctrl-single";
/* Proxy 0 addressing */
reg = <0x00 0x4301c190 0x00 0x004>;
#pinctrl-cells = <1>;
@@ -125,7 +125,7 @@ wkup_gpio_intr: interrupt-controller@...00000 {
/* MCU_TIMERIO pad input CTRLMMR_MCU_TIMER*_CTRL registers */
mcu_timerio_input: pinctrl@...04200 {
- compatible = "pinctrl-single";
+ compatible = "ti,j7200-padconf", "pinctrl-single";
reg = <0x00 0x40f04200 0x00 0x28>;
#pinctrl-cells = <1>;
pinctrl-single,register-width = <32>;
@@ -136,7 +136,7 @@ mcu_timerio_input: pinctrl@...04200 {
/* MCU_TIMERIO pad output CTRLMMR_MCU_TIMERIO*_CTRL registers */
mcu_timerio_output: pinctrl@...04280 {
- compatible = "pinctrl-single";
+ compatible = "ti,j7200-padconf", "pinctrl-single";
reg = <0x00 0x40f04280 0x00 0x28>;
#pinctrl-cells = <1>;
pinctrl-single,register-width = <32>;
---
base-commit: eff6d7cad08c4ce4e3456fd7f8f1d94c81cd2b63
change-id: 20241108-j784s4-s2r-pinctrl-643e1ac2014c
Best regards,
--
Thomas Richard <thomas.richard@...tlin.com>
Powered by blists - more mailing lists