[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <a8c4dea53aab46b9ab8d40b9d997f13e@quicinc.com>
Date: Thu, 14 Nov 2024 04:25:45 +0000
From: "Renjiang Han (QUIC)" <quic_renjiang@...cinc.com>
To: "dmitry.baryshkov@...aro.org" <dmitry.baryshkov@...aro.org>
CC: Stanimir Varbanov <stanimir.k.varbanov@...il.com>,
"Vikash Garodia (QUIC)"
<quic_vgarodia@...cinc.com>,
"bryan.odonoghue@...aro.org"
<bryan.odonoghue@...aro.org>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
"Rob Herring" <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
"Conor Dooley" <conor+dt@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
"Konrad Dybcio" <konradybcio@...nel.org>,
"linux-media@...r.kernel.org"
<linux-media@...r.kernel.org>,
"linux-arm-msm@...r.kernel.org"
<linux-arm-msm@...r.kernel.org>,
"devicetree@...r.kernel.org"
<devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org"
<linux-kernel@...r.kernel.org>
Subject: RE: [PATCH v2 2/4] media: venus: core: add qcs615 platform data
On Thu 11/14/2024 2:01 AM, Dmitry Baryshkov wrote:
> On Tue, Nov 12, 2024 at 05:17:58PM +0530, Renjiang Han wrote:
> > Initialize the platform data and enable venus driver probe of QCS615
> > SoC.
> >
> > Signed-off-by: Renjiang Han <quic_renjiang@...cinc.com>
> > ---
> > drivers/media/platform/qcom/venus/core.c | 50
> > ++++++++++++++++++++++++++++++++
> > 1 file changed, 50 insertions(+)
> >
> > diff --git a/drivers/media/platform/qcom/venus/core.c
> > b/drivers/media/platform/qcom/venus/core.c
> > index
> > 423deb5e94dcb193974da23f9bd2d905bfeab2d9..39d8bcf62fe4f72674746b75994c
> > ce6cbaee94eb 100644
> > --- a/drivers/media/platform/qcom/venus/core.c
> > +++ b/drivers/media/platform/qcom/venus/core.c
> > @@ -630,6 +630,55 @@ static const struct venus_resources msm8998_res = {
> > .fwname = "qcom/venus-4.4/venus.mbn", };
> >
> > +static const struct freq_tbl qcs615_freq_table[] = {
> > + { 0, 460000000 },
> > + { 0, 410000000 },
> > + { 0, 380000000 },
> > + { 0, 300000000 },
> > + { 0, 240000000 },
> > + { 0, 133333333 },
> > +};
> > +
> > +static const struct bw_tbl qcs615_bw_table_enc[] = {
> > + { 972000, 951000, 0, 1434000, 0 }, /* 3840x2160@30 */
> > + { 489600, 723000, 0, 973000, 0 }, /* 1920x1080@60 */
> > + { 244800, 370000, 0, 495000, 0 }, /* 1920x1080@30 */
> > +};
> > +
> > +static const struct bw_tbl qcs615_bw_table_dec[] = {
> > + { 1036800, 1987000, 0, 2797000, 0 }, /* 4096x2160@30 */
> > + { 489600, 1040000, 0, 1298000, 0 }, /* 1920x1080@60 */
> > + { 244800, 530000, 0, 659000, 0 }, /* 1920x1080@30 */
> > +};
> > +
> > +static const struct venus_resources qcs615_res = {
> > + .freq_tbl = qcs615_freq_table,
> > + .freq_tbl_size = ARRAY_SIZE(qcs615_freq_table),
> > + .bw_tbl_enc = qcs615_bw_table_enc,
> > + .bw_tbl_enc_size = ARRAY_SIZE(qcs615_bw_table_enc),
> > + .bw_tbl_dec = qcs615_bw_table_dec,
> > + .bw_tbl_dec_size = ARRAY_SIZE(qcs615_bw_table_dec),
> > + .clks = {"core", "iface", "bus" },
> > + .clks_num = 3,
> > + .vcodec0_clks = { "vcodec0_core", "vcodec0_bus" },
> > + .vcodec_clks_num = 2,
> > + .vcodec_pmdomains = (const char *[]) { "venus", "vcodec0" },
> > + .vcodec_pmdomains_num = 2,
> > + .opp_pmdomain = (const char *[]) { "cx" },
> > + .vcodec_num = 1,
> > + .hfi_version = HFI_VERSION_4XX,
> > + .vpu_version = VPU_VERSION_AR50,
> > + .vmem_id = VIDC_RESOURCE_NONE,
> > + .vmem_size = 0,
> > + .vmem_addr = 0,
> > + .dma_mask = 0xe0000000 - 1,
> > + .cp_start = 0,
> > + .cp_size = 0x70800000,
> > + .cp_nonpixel_start = 0x1000000,
> > + .cp_nonpixel_size = 0x24800000,
> > + .fwname = "qcom/venus-5.4/venus_s6.mbn",
> Why does it need a separate firmware file?
SC7180, qcs615 can be enabled on same firmware ideally, but due to a different signing for qcs615, it takes a separate bin (venus_s6.mbn).
Best Regards,
Renjiang
> > +};
> > +
> > static const struct freq_tbl sdm660_freq_table[] = {
> > { 979200, 518400000 },
> > { 489600, 441600000 },
> > @@ -937,6 +986,7 @@ static const struct of_device_id venus_dt_match[] = {
> > { .compatible = "qcom,msm8916-venus", .data = &msm8916_res, },
> > { .compatible = "qcom,msm8996-venus", .data = &msm8996_res, },
> > { .compatible = "qcom,msm8998-venus", .data = &msm8998_res, },
> > + { .compatible = "qcom,qcs615-venus", .data = &qcs615_res, },
> > { .compatible = "qcom,sdm660-venus", .data = &sdm660_res, },
> > { .compatible = "qcom,sdm845-venus", .data = &sdm845_res, },
> > { .compatible = "qcom,sdm845-venus-v2", .data = &sdm845_res_v2, },
> >
> > --
> > 2.34.1
> >
> --
> With best wishes
> Dmitry
Powered by blists - more mailing lists