[<prev] [next>] [day] [month] [year] [list]
Message-Id: <20241115132632.599188-1-mordan@ispras.ru>
Date: Fri, 15 Nov 2024 16:26:32 +0300
From: Vitalii Mordan <mordan@...ras.ru>
To: Alexandre Torgue <alexandre.torgue@...s.st.com>
Cc: Vitalii Mordan <mordan@...ras.ru>,
Jose Abreu <joabreu@...opsys.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
netdev@...r.kernel.org,
linux-stm32@...md-mailman.stormreply.com,
linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org,
lvc-project@...uxtesting.org,
Fedor Pchelkin <pchelkin@...ras.ru>,
Alexey Khoroshilov <khoroshilov@...ras.ru>,
Vadim Mutilin <mutilin@...ras.ru>,
Andrew Lunn <andrew@...n.ch>
Subject: [PATCH net-next v3] stmmac: dwmac-intel-plat: remove redundant dwmac->data check in probe
The driver’s compatibility with devices is confirmed earlier in
platform_match(). Since reaching probe means the device is valid,
the extra check can be removed to simplify the code.
Signed-off-by: Vitalii Mordan <mordan@...ras.ru>
Reviewed-by: Andrew Lunn <andrew@...n.ch>
---
v2: Add a comment explaining why dwmac->data cannot be NULL, as per
Andrew Lunn's request.
v3: Resolve merge conflicts.
.../stmicro/stmmac/dwmac-intel-plat.c | 53 ++++++++++---------
1 file changed, 28 insertions(+), 25 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel-plat.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel-plat.c
index a433526dcbe8..d94f0a150e93 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel-plat.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel-plat.c
@@ -97,35 +97,38 @@ static int intel_eth_plat_probe(struct platform_device *pdev)
dwmac->dev = &pdev->dev;
dwmac->tx_clk = NULL;
+ /*
+ * This cannot return NULL at this point because the driver’s
+ * compatibility with the device has already been validated in
+ * platform_match().
+ */
dwmac->data = device_get_match_data(&pdev->dev);
- if (dwmac->data) {
- if (dwmac->data->fix_mac_speed)
- plat_dat->fix_mac_speed = dwmac->data->fix_mac_speed;
-
- /* Enable TX clock */
- if (dwmac->data->tx_clk_en) {
- dwmac->tx_clk = devm_clk_get(&pdev->dev, "tx_clk");
- if (IS_ERR(dwmac->tx_clk))
- return PTR_ERR(dwmac->tx_clk);
+ if (dwmac->data->fix_mac_speed)
+ plat_dat->fix_mac_speed = dwmac->data->fix_mac_speed;
+
+ /* Enable TX clock */
+ if (dwmac->data->tx_clk_en) {
+ dwmac->tx_clk = devm_clk_get(&pdev->dev, "tx_clk");
+ if (IS_ERR(dwmac->tx_clk))
+ return PTR_ERR(dwmac->tx_clk);
+
+ ret = clk_prepare_enable(dwmac->tx_clk);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "Failed to enable tx_clk\n");
+ return ret;
+ }
- ret = clk_prepare_enable(dwmac->tx_clk);
+ /* Check and configure TX clock rate */
+ rate = clk_get_rate(dwmac->tx_clk);
+ if (dwmac->data->tx_clk_rate &&
+ rate != dwmac->data->tx_clk_rate) {
+ rate = dwmac->data->tx_clk_rate;
+ ret = clk_set_rate(dwmac->tx_clk, rate);
if (ret) {
dev_err(&pdev->dev,
- "Failed to enable tx_clk\n");
- return ret;
- }
-
- /* Check and configure TX clock rate */
- rate = clk_get_rate(dwmac->tx_clk);
- if (dwmac->data->tx_clk_rate &&
- rate != dwmac->data->tx_clk_rate) {
- rate = dwmac->data->tx_clk_rate;
- ret = clk_set_rate(dwmac->tx_clk, rate);
- if (ret) {
- dev_err(&pdev->dev,
- "Failed to set tx_clk\n");
- goto err_tx_clk_disable;
- }
+ "Failed to set tx_clk\n");
+ goto err_tx_clk_disable;
}
}
--
2.25.1
Powered by blists - more mailing lists