[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20241116-vop2-hdmi0-disp-modes-v1-3-2bca51db4898@collabora.com>
Date: Sat, 16 Nov 2024 20:22:34 +0200
From: Cristian Ciocaltea <cristian.ciocaltea@...labora.com>
To: Sandy Huang <hjc@...k-chips.com>,
Heiko Stübner <heiko@...ech.de>,
Andy Yan <andy.yan@...k-chips.com>,
Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
Maxime Ripard <mripard@...nel.org>, Thomas Zimmermann <tzimmermann@...e.de>,
David Airlie <airlied@...il.com>, Simona Vetter <simona@...ll.ch>,
Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: kernel@...labora.com, dri-devel@...ts.freedesktop.org,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-rockchip@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: [PATCH 3/5] drm/rockchip: vop2: Improve display modes handling on
RK3588 HDMI0
The RK3588 specific implementation is currently quite limited in terms
of handling the full range of display modes supported by the connected
screens, e.g. 2560x1440@...z, 2048x1152@...z, 1024x768@...z are just a
few of them.
Additionally, it doesn't cope well with non-integer refresh rates like
59.94, 29.97, 23.98, etc.
Make use of HDMI0 PHY PLL as a more accurate DCLK source to handle
all display modes up to 4K@...z.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@...labora.com>
---
drivers/gpu/drm/rockchip/rockchip_drm_vop2.c | 34 ++++++++++++++++++++++++++++
1 file changed, 34 insertions(+)
diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
index 3e4c1cfd0bac6fa90f4cab85e27c2a69b86fc9aa..dfe1a50132d596f036430d7db3631398d0802972 100644
--- a/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
+++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop2.c
@@ -158,6 +158,7 @@ struct vop2_video_port {
struct drm_crtc crtc;
struct vop2 *vop2;
struct clk *dclk;
+ struct clk *dclk_src;
unsigned int id;
const struct vop2_video_port_data *data;
@@ -212,6 +213,7 @@ struct vop2 {
struct clk *hclk;
struct clk *aclk;
struct clk *pclk;
+ struct clk *pll_hdmiphy0;
/* optional internal rgb encoder */
struct rockchip_rgb *rgb;
@@ -220,6 +222,8 @@ struct vop2 {
struct vop2_win win[];
};
+#define VOP2_MAX_DCLK_RATE 600000 /* kHz */
+
#define vop2_output_if_is_hdmi(x) ((x) == ROCKCHIP_VOP2_EP_HDMI0 || \
(x) == ROCKCHIP_VOP2_EP_HDMI1)
@@ -1103,6 +1107,9 @@ static void vop2_crtc_atomic_disable(struct drm_crtc *crtc,
vop2_crtc_disable_irq(vp, VP_INT_DSP_HOLD_VALID);
+ if (vp->dclk_src)
+ clk_set_parent(vp->dclk, vp->dclk_src);
+
clk_disable_unprepare(vp->dclk);
vop2->enable_count--;
@@ -2192,6 +2199,27 @@ static void vop2_crtc_atomic_enable(struct drm_crtc *crtc,
vop2_vp_write(vp, RK3568_VP_MIPI_CTRL, 0);
+ /*
+ * Switch to HDMI PHY PLL as DCLK source for display modes up
+ * to 4K@...z, if available, otherwise keep using the system CRU.
+ */
+ if (vop2->pll_hdmiphy0 && mode->crtc_clock <= VOP2_MAX_DCLK_RATE) {
+ drm_for_each_encoder_mask(encoder, crtc->dev, crtc_state->encoder_mask) {
+ struct rockchip_encoder *rkencoder = to_rockchip_encoder(encoder);
+
+ if (rkencoder->crtc_endpoint_id == ROCKCHIP_VOP2_EP_HDMI0) {
+ if (!vp->dclk_src)
+ vp->dclk_src = clk_get_parent(vp->dclk);
+
+ ret = clk_set_parent(vp->dclk, vop2->pll_hdmiphy0);
+ if (ret < 0)
+ drm_warn(vop2->drm,
+ "Could not switch to HDMI0 PHY PLL: %d\n", ret);
+ break;
+ }
+ }
+ }
+
clk_set_rate(vp->dclk, clock);
vop2_post_config(crtc);
@@ -3355,6 +3383,12 @@ static int vop2_bind(struct device *dev, struct device *master, void *data)
return PTR_ERR(vop2->pclk);
}
+ vop2->pll_hdmiphy0 = devm_clk_get_optional(vop2->dev, "pll_hdmiphy0");
+ if (IS_ERR(vop2->pll_hdmiphy0)) {
+ drm_err(vop2->drm, "failed to get pll_hdmiphy0\n");
+ return PTR_ERR(vop2->pll_hdmiphy0);
+ }
+
vop2->irq = platform_get_irq(pdev, 0);
if (vop2->irq < 0) {
drm_err(vop2->drm, "cannot find irq for vop2\n");
--
2.47.0
Powered by blists - more mailing lists