| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20241118-imx412-newlines-v1-1-152fe6863838@fairphone.com>
Date: Mon, 18 Nov 2024 22:45:46 +0100
From: Luca Weiss <luca.weiss@...rphone.com>
To: Sakari Ailus <sakari.ailus@...ux.intel.com>,
Mauro Carvalho Chehab <mchehab@...nel.org>
Cc: ~postmarketos/upstreaming@...ts.sr.ht, phone-devel@...r.kernel.org,
linux-media@...r.kernel.org, linux-kernel@...r.kernel.org,
Luca Weiss <luca.weiss@...rphone.com>
Subject: [PATCH] media: i2c: imx412: Add missing newline to prints
Add trailing \n to dev_dbg and dev_err prints where missing.
Signed-off-by: Luca Weiss <luca.weiss@...rphone.com>
---
drivers/media/i2c/imx412.c | 42 +++++++++++++++++++++---------------------
1 file changed, 21 insertions(+), 21 deletions(-)
diff --git a/drivers/media/i2c/imx412.c b/drivers/media/i2c/imx412.c
index 0bfe3046fcc8726ef4e484d0fbf980422343fccc..c74097a59c42853ff2a1b600f28ff5aacedb1c6b 100644
--- a/drivers/media/i2c/imx412.c
+++ b/drivers/media/i2c/imx412.c
@@ -547,7 +547,7 @@ static int imx412_update_exp_gain(struct imx412 *imx412, u32 exposure, u32 gain)
lpfr = imx412->vblank + imx412->cur_mode->height;
- dev_dbg(imx412->dev, "Set exp %u, analog gain %u, lpfr %u",
+ dev_dbg(imx412->dev, "Set exp %u, analog gain %u, lpfr %u\n",
exposure, gain, lpfr);
ret = imx412_write_reg(imx412, IMX412_REG_HOLD, 1, 1);
@@ -594,7 +594,7 @@ static int imx412_set_ctrl(struct v4l2_ctrl *ctrl)
case V4L2_CID_VBLANK:
imx412->vblank = imx412->vblank_ctrl->val;
- dev_dbg(imx412->dev, "Received vblank %u, new lpfr %u",
+ dev_dbg(imx412->dev, "Received vblank %u, new lpfr %u\n",
imx412->vblank,
imx412->vblank + imx412->cur_mode->height);
@@ -613,7 +613,7 @@ static int imx412_set_ctrl(struct v4l2_ctrl *ctrl)
exposure = ctrl->val;
analog_gain = imx412->again_ctrl->val;
- dev_dbg(imx412->dev, "Received exp %u, analog gain %u",
+ dev_dbg(imx412->dev, "Received exp %u, analog gain %u\n",
exposure, analog_gain);
ret = imx412_update_exp_gain(imx412, exposure, analog_gain);
@@ -622,7 +622,7 @@ static int imx412_set_ctrl(struct v4l2_ctrl *ctrl)
break;
default:
- dev_err(imx412->dev, "Invalid control %d", ctrl->id);
+ dev_err(imx412->dev, "Invalid control %d\n", ctrl->id);
ret = -EINVAL;
}
@@ -803,14 +803,14 @@ static int imx412_start_streaming(struct imx412 *imx412)
ret = imx412_write_regs(imx412, reg_list->regs,
reg_list->num_of_regs);
if (ret) {
- dev_err(imx412->dev, "fail to write initial registers");
+ dev_err(imx412->dev, "fail to write initial registers\n");
return ret;
}
/* Setup handler will write actual exposure and gain */
ret = __v4l2_ctrl_handler_setup(imx412->sd.ctrl_handler);
if (ret) {
- dev_err(imx412->dev, "fail to setup handler");
+ dev_err(imx412->dev, "fail to setup handler\n");
return ret;
}
@@ -821,7 +821,7 @@ static int imx412_start_streaming(struct imx412 *imx412)
ret = imx412_write_reg(imx412, IMX412_REG_MODE_SELECT,
1, IMX412_MODE_STREAMING);
if (ret) {
- dev_err(imx412->dev, "fail to start streaming");
+ dev_err(imx412->dev, "fail to start streaming\n");
return ret;
}
@@ -895,7 +895,7 @@ static int imx412_detect(struct imx412 *imx412)
return ret;
if (val != IMX412_ID) {
- dev_err(imx412->dev, "chip id mismatch: %x!=%x",
+ dev_err(imx412->dev, "chip id mismatch: %x!=%x\n",
IMX412_ID, val);
return -ENXIO;
}
@@ -927,7 +927,7 @@ static int imx412_parse_hw_config(struct imx412 *imx412)
imx412->reset_gpio = devm_gpiod_get_optional(imx412->dev, "reset",
GPIOD_OUT_LOW);
if (IS_ERR(imx412->reset_gpio)) {
- dev_err(imx412->dev, "failed to get reset gpio %ld",
+ dev_err(imx412->dev, "failed to get reset gpio %ld\n",
PTR_ERR(imx412->reset_gpio));
return PTR_ERR(imx412->reset_gpio);
}
@@ -935,13 +935,13 @@ static int imx412_parse_hw_config(struct imx412 *imx412)
/* Get sensor input clock */
imx412->inclk = devm_clk_get(imx412->dev, NULL);
if (IS_ERR(imx412->inclk)) {
- dev_err(imx412->dev, "could not get inclk");
+ dev_err(imx412->dev, "could not get inclk\n");
return PTR_ERR(imx412->inclk);
}
rate = clk_get_rate(imx412->inclk);
if (rate != IMX412_INCLK_RATE) {
- dev_err(imx412->dev, "inclk frequency mismatch");
+ dev_err(imx412->dev, "inclk frequency mismatch\n");
return -EINVAL;
}
@@ -966,14 +966,14 @@ static int imx412_parse_hw_config(struct imx412 *imx412)
if (bus_cfg.bus.mipi_csi2.num_data_lanes != IMX412_NUM_DATA_LANES) {
dev_err(imx412->dev,
- "number of CSI2 data lanes %d is not supported",
+ "number of CSI2 data lanes %d is not supported\n",
bus_cfg.bus.mipi_csi2.num_data_lanes);
ret = -EINVAL;
goto done_endpoint_free;
}
if (!bus_cfg.nr_of_link_frequencies) {
- dev_err(imx412->dev, "no link frequencies defined");
+ dev_err(imx412->dev, "no link frequencies defined\n");
ret = -EINVAL;
goto done_endpoint_free;
}
@@ -1034,7 +1034,7 @@ static int imx412_power_on(struct device *dev)
ret = clk_prepare_enable(imx412->inclk);
if (ret) {
- dev_err(imx412->dev, "fail to enable inclk");
+ dev_err(imx412->dev, "fail to enable inclk\n");
goto error_reset;
}
@@ -1145,7 +1145,7 @@ static int imx412_init_controls(struct imx412 *imx412)
imx412->hblank_ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY;
if (ctrl_hdlr->error) {
- dev_err(imx412->dev, "control init failed: %d",
+ dev_err(imx412->dev, "control init failed: %d\n",
ctrl_hdlr->error);
v4l2_ctrl_handler_free(ctrl_hdlr);
return ctrl_hdlr->error;
@@ -1183,7 +1183,7 @@ static int imx412_probe(struct i2c_client *client)
ret = imx412_parse_hw_config(imx412);
if (ret) {
- dev_err(imx412->dev, "HW configuration is not supported");
+ dev_err(imx412->dev, "HW configuration is not supported\n");
return ret;
}
@@ -1191,14 +1191,14 @@ static int imx412_probe(struct i2c_client *client)
ret = imx412_power_on(imx412->dev);
if (ret) {
- dev_err(imx412->dev, "failed to power-on the sensor");
+ dev_err(imx412->dev, "failed to power-on the sensor\n");
goto error_mutex_destroy;
}
/* Check module identity */
ret = imx412_detect(imx412);
if (ret) {
- dev_err(imx412->dev, "failed to find sensor: %d", ret);
+ dev_err(imx412->dev, "failed to find sensor: %d\n", ret);
goto error_power_off;
}
@@ -1208,7 +1208,7 @@ static int imx412_probe(struct i2c_client *client)
ret = imx412_init_controls(imx412);
if (ret) {
- dev_err(imx412->dev, "failed to init controls: %d", ret);
+ dev_err(imx412->dev, "failed to init controls: %d\n", ret);
goto error_power_off;
}
@@ -1222,14 +1222,14 @@ static int imx412_probe(struct i2c_client *client)
imx412->pad.flags = MEDIA_PAD_FL_SOURCE;
ret = media_entity_pads_init(&imx412->sd.entity, 1, &imx412->pad);
if (ret) {
- dev_err(imx412->dev, "failed to init entity pads: %d", ret);
+ dev_err(imx412->dev, "failed to init entity pads: %d\n", ret);
goto error_handler_free;
}
ret = v4l2_async_register_subdev_sensor(&imx412->sd);
if (ret < 0) {
dev_err(imx412->dev,
- "failed to register async subdev: %d", ret);
+ "failed to register async subdev: %d\n", ret);
goto error_media_entity;
}
---
base-commit: ae58226b89ac0cffa05ba7357733776542e40216
change-id: 20241118-imx412-newlines-3b0321da960d
Best regards,
--
Luca Weiss <luca.weiss@...rphone.com>
Powered by blists - more mailing lists