[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ZzzDu0tcyixAZ8l1@shell.armlinux.org.uk>
Date: Tue, 19 Nov 2024 16:58:35 +0000
From: "Russell King (Oracle)" <linux@...linux.org.uk>
To: jan.petrous@....nxp.com
Cc: Maxime Coquelin <mcoquelin.stm32@...il.com>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
Jose Abreu <joabreu@...opsys.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Vinod Koul <vkoul@...nel.org>,
Richard Cochran <richardcochran@...il.com>,
Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
Emil Renner Berthing <kernel@...il.dk>,
Minda Chen <minda.chen@...rfivetech.com>,
Nicolas Ferre <nicolas.ferre@...rochip.com>,
Claudiu Beznea <claudiu.beznea@...on.dev>,
Iyappan Subramanian <iyappan@...amperecomputing.com>,
Keyur Chudgar <keyur@...amperecomputing.com>,
Quan Nguyen <quan@...amperecomputing.com>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Giuseppe Cavallaro <peppe.cavallaro@...com>,
linux-stm32@...md-mailman.stormreply.com,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
netdev@...r.kernel.org, linux-arm-msm@...r.kernel.org,
imx@...ts.linux.dev, devicetree@...r.kernel.org,
NXP S32 Linux Team <s32@....com>
Subject: Re: [PATCH v5 14/16] net: stmmac: dwmac-s32: add basic NXP S32G/S32R
glue driver
On Tue, Nov 19, 2024 at 04:00:20PM +0100, Jan Petrous via B4 Relay wrote:
> From: "Jan Petrous (OSS)" <jan.petrous@....nxp.com>
>
> NXP S32G2xx/S32G3xx and S32R45 are automotive grade SoCs
> that integrate one or two Synopsys DWMAC 5.10/5.20 IPs.
>
> The basic driver supports only RGMII interface.
>
> Signed-off-by: Jan Petrous (OSS) <jan.petrous@....nxp.com>
One thing that stands out to me in this is the duplication of the PHY
interface mode. I would much prefer if we didn't end up with multiple
copies, but instead made use of the one already in plat_stmmacenet_data
maybe by storing a its pointer in struct s32_priv_data?
> ---
> drivers/net/ethernet/stmicro/stmmac/Kconfig | 12 ++
> drivers/net/ethernet/stmicro/stmmac/Makefile | 1 +
> drivers/net/ethernet/stmicro/stmmac/dwmac-s32.c | 204 ++++++++++++++++++++++++
> 3 files changed, 217 insertions(+)
>
> diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
> index 05cc07b8f48c..a6579377bedb 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
> +++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
> @@ -154,6 +154,18 @@ config DWMAC_RZN1
> the stmmac device driver. This support can make use of a custom MII
> converter PCS device.
>
> +config DWMAC_S32
> + tristate "NXP S32G/S32R GMAC support"
> + default ARCH_S32
> + depends on OF && (ARCH_S32 || COMPILE_TEST)
> + help
> + Support for ethernet controller on NXP S32CC SOCs.
> +
> + This selects NXP SoC glue layer support for the stmmac
> + device driver. This driver is used for the S32CC series
> + SOCs GMAC ethernet controller, ie. S32G2xx, S32G3xx and
> + S32R45.
> +
> config DWMAC_SOCFPGA
> tristate "SOCFPGA dwmac support"
> default ARCH_INTEL_SOCFPGA
> diff --git a/drivers/net/ethernet/stmicro/stmmac/Makefile b/drivers/net/ethernet/stmicro/stmmac/Makefile
> index c2f0e91f6bf8..1e87e2652c82 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/Makefile
> +++ b/drivers/net/ethernet/stmicro/stmmac/Makefile
> @@ -22,6 +22,7 @@ obj-$(CONFIG_DWMAC_MESON) += dwmac-meson.o dwmac-meson8b.o
> obj-$(CONFIG_DWMAC_QCOM_ETHQOS) += dwmac-qcom-ethqos.o
> obj-$(CONFIG_DWMAC_ROCKCHIP) += dwmac-rk.o
> obj-$(CONFIG_DWMAC_RZN1) += dwmac-rzn1.o
> +obj-$(CONFIG_DWMAC_S32) += dwmac-s32.o
> obj-$(CONFIG_DWMAC_SOCFPGA) += dwmac-altr-socfpga.o
> obj-$(CONFIG_DWMAC_STARFIVE) += dwmac-starfive.o
> obj-$(CONFIG_DWMAC_STI) += dwmac-sti.o
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-s32.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-s32.c
> new file mode 100644
> index 000000000000..9af7cd093100
> --- /dev/null
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-s32.c
> @@ -0,0 +1,204 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * NXP S32G/R GMAC glue layer
> + *
> + * Copyright 2019-2024 NXP
> + *
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/clk-provider.h>
> +#include <linux/device.h>
> +#include <linux/ethtool.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of_mdio.h>
> +#include <linux/of_address.h>
> +#include <linux/phy.h>
> +#include <linux/phylink.h>
> +#include <linux/platform_device.h>
> +#include <linux/stmmac.h>
> +
> +#include "stmmac_platform.h"
> +
> +#define GMAC_TX_RATE_125M 125000000 /* 125MHz */
> +
> +/* SoC PHY interface control register */
> +#define PHY_INTF_SEL_MII 0x00
> +#define PHY_INTF_SEL_SGMII 0x01
> +#define PHY_INTF_SEL_RGMII 0x02
> +#define PHY_INTF_SEL_RMII 0x08
> +
> +struct s32_priv_data {
> + void __iomem *ioaddr;
> + void __iomem *ctrl_sts;
> + struct device *dev;
> + phy_interface_t intf_mode;
> + struct clk *tx_clk;
> + struct clk *rx_clk;
> +};
> +
> +static int s32_gmac_write_phy_intf_select(struct s32_priv_data *gmac)
> +{
> + u32 intf_sel;
> +
> + switch (gmac->intf_mode) {
> + case PHY_INTERFACE_MODE_RGMII:
> + case PHY_INTERFACE_MODE_RGMII_ID:
> + case PHY_INTERFACE_MODE_RGMII_TXID:
> + case PHY_INTERFACE_MODE_RGMII_RXID:
> + intf_sel = PHY_INTF_SEL_RGMII;
> + break;
> + default:
> + dev_err(gmac->dev, "Unsupported PHY interface: %s\n",
> + phy_modes(gmac->intf_mode));
> + return -EINVAL;
> + }
This can be simplfied to:
if (!phy_interface_mode_is_rgmii(...)) {
dev_err(gmac->dev, "Unsupported PHY interface: %s\n",
phy_modes(...));
return -EINVAL;
}
Also, would it not be better to validate this in s32_dwmac_probe()?
Thanks.
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!
Powered by blists - more mailing lists