linux-kernel - Re: [PATCH v6 1/7] dt-bindings: mfd: add support for the NXP SIUL2 module

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <18e7a32c-a8de-4e5a-80aa-248b2090e346@kernel.org>
Date: Tue, 19 Nov 2024 10:21:59 +0100
From: Krzysztof Kozlowski <krzk@...nel.org>
To: Andrei Stefanescu <andrei.stefanescu@....nxp.com>,
 Linus Walleij <linus.walleij@...aro.org>, Bartosz Golaszewski
 <brgl@...ev.pl>, Rob Herring <robh@...nel.org>,
 Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley
 <conor+dt@...nel.org>, Chester Lin <chester62515@...il.com>,
 Matthias Brugger <mbrugger@...e.com>,
 Ghennadi Procopciuc <Ghennadi.Procopciuc@....com>,
 Larisa Grigore <larisa.grigore@....com>,
 Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
 "Rafael J. Wysocki" <rafael@...nel.org>, Lee Jones <lee@...nel.org>,
 Shawn Guo <shawnguo@...nel.org>, Sascha Hauer <s.hauer@...gutronix.de>,
 Fabio Estevam <festevam@...il.com>, Dong Aisheng <aisheng.dong@....com>,
 Jacky Bai <ping.bai@....com>
Cc: linux-gpio@...r.kernel.org, devicetree@...r.kernel.org,
 linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
 NXP S32 Linux Team <s32@....com>, Christophe Lizzi <clizzi@...hat.com>,
 Alberto Ruiz <aruizrui@...hat.com>, Enric Balletbo <eballetb@...hat.com>,
 Pengutronix Kernel Team <kernel@...gutronix.de>, imx@...ts.linux.dev
Subject: Re: [PATCH v6 1/7] dt-bindings: mfd: add support for the NXP SIUL2
 module

On 13/11/2024 11:10, Andrei Stefanescu wrote:
> +
> +properties:
> +  compatible:
> +    enum:
> +      - nxp,s32g2-siul2
> +      - nxp,s32g3-siul2

Not much improved. See other NXP bindings how they do this.

> +
> +  reg:
> +    maxItems: 2
> +
> +  reg-names:
> +    items:
> +      - const: siul20
> +      - const: siul21
> +
> +  gpio-controller: true
> +
> +  "#gpio-cells":
> +    const: 2
> +
> +  gpio-ranges:
> +    maxItems: 2
> +
> +  gpio-reserved-ranges:
> +    maxItems: 2

That's odd to always require two reserved ranges. Does this mean all
devices have exactly the same reserved GPIOs? Then the driver should not
export them.

> +
> +  interrupts:
> +    maxItems: 1
> +
> +  interrupt-controller: true
> +
> +  "#interrupt-cells":
> +    const: 2
> +
> +  nvmem-layout:
> +    $ref: /schemas/nvmem/layouts/nvmem-layout.yaml#
> +    description:
> +      This container may reference an NVMEM layout parser.
> +
> +patternProperties:
> +  "-hog(-[0-9]+)?$":
> +    required:
> +      - gpio-hog
> +
> +  "-pins$":
> +    type: object
> +    additionalProperties: false
> +
> +    patternProperties:
> +      "-grp[0-9]$":
> +        type: object
> +        allOf:
> +          - $ref: /schemas/pinctrl/pinmux-node.yaml#
> +          - $ref: /schemas/pinctrl/pincfg-node.yaml#
> +        description:
> +          Pinctrl node's client devices specify pin muxes using subnodes,
> +          which in turn use the standard properties below.
> +
> +        properties:
> +          bias-disable: true
> +          bias-high-impedance: true
> +          bias-pull-up: true
> +          bias-pull-down: true
> +          drive-open-drain: true
> +          input-enable: true
> +          output-enable: true
> +
> +          pinmux:
> +            description: |
> +              An integer array for representing pinmux configurations of
> +              a device. Each integer consists of a PIN_ID and a 4-bit
> +              selected signal source(SSS) as IOMUX setting, which is
> +              calculated as: pinmux = (PIN_ID << 4 | SSS)
> +
> +          slew-rate:
> +            description: Supported slew rate based on Fmax values (MHz)
> +            enum: [83, 133, 150, 166, 208]
> +        required:
> +          - pinmux
> +
> +        additionalProperties: false
> +
> +required:
> +  - compatible
> +  - reg
> +  - reg-names
> +  - gpio-controller
> +  - "#gpio-cells"
> +  - gpio-ranges
> +  - gpio-reserved-ranges
> +  - interrupts
> +  - interrupt-controller
> +  - "#interrupt-cells"
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +    siul2@...9c000 {

<form letter>
This is a friendly reminder during the review process.

It seems my or other reviewer's previous comments were not fully
addressed. Maybe the feedback got lost between the quotes, maybe you
just forgot to apply it. Please go back to the previous discussion and
either implement all requested changes or keep discussing them.

Thank you.
</form letter>

Best regards,
Krzysztof