[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ZzxerMEiUYUhdDIy@pengutronix.de>
Date: Tue, 19 Nov 2024 10:47:24 +0100
From: Oleksij Rempel <o.rempel@...gutronix.de>
To: Choong Yong Liang <yong.liang.choong@...ux.intel.com>
Cc: "Russell King (Oracle)" <linux@...linux.org.uk>,
Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>,
"David S . Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Alexandre Torgue <alexandre.torgue@...s.st.com>,
Jose Abreu <joabreu@...opsys.com>,
Maxime Coquelin <mcoquelin.stm32@...il.com>, netdev@...r.kernel.org,
linux-kernel@...r.kernel.org,
linux-stm32@...md-mailman.stormreply.com,
linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH net v2 1/2] net: phy: replace phydev->eee_enabled with
eee_cfg.eee_enabled
On Tue, Nov 19, 2024 at 05:06:33PM +0800, Choong Yong Liang wrote:
>
>
> On 15/11/2024 9:37 pm, Russell King (Oracle) wrote:
> > On Fri, Nov 15, 2024 at 07:11:50PM +0800, Choong Yong Liang wrote:
> > > Not all PHYs have EEE enabled by default. For example, Marvell PHYs are
> > > designed to have EEE hardware disabled during the initial state.
> > >
> > > In the initial stage, phy_probe() sets phydev->eee_enabled to be disabled.
> > > Then, the MAC calls phy_support_eee() to set eee_cfg.eee_enabled to be
> > > enabled. However, when phy_start_aneg() is called,
> > > genphy_c45_an_config_eee_aneg() still refers to phydev->eee_enabled.
> > > This causes the 'ethtool --show-eee' command to show that EEE is enabled,
> > > but in actuality, the driver side is disabled.
> > >
> > > This patch will remove phydev->eee_enabled and replace it with
> > > eee_cfg.eee_enabled. When performing genphy_c45_an_config_eee_aneg(),
> > > it will follow the master configuration to have software and hardware
> > > in sync.
> >
> > Hmm. I'm not happy with how you're handling my patch. I would've liked
> > some feedback on it (thanks for spotting that the set_eee case needed
> > to pass the state to genphy_c45_an_config_eee_aneg()).
> >
> > However, what's worse is, that the bulk of this patch is my work, yet
> > you've effectively claimed complete authorship of it in the way you
> > are submitting this patch. Moreover, you are violating the kernel
> > submission rules, as the Signed-off-by does not include one for me
> > (which I need to explicitly give.) I was waiting for the results of
> > your testing before finalising the patch.
> >
> > The patch needs to be authored by me, the first sign-off needs to be
> > me, then optionally Co-developed-by for you, and then your sign-off.
> >
> > See Documentation/process/submitting-patches.rst
> >
> > Thanks.
> >
> > pw-bot: cr
> >
>
> Sorry for the late reply; I just got back from my sick leave. I wasn't aware
> that you had already submitted a patch. I thought I should include it in my
> patch series. However, I think I messed up the "Signed-off" part. Sorry
> about that.
>
> The testing part actually took quite some time to complete, and I was
> already sick last Friday. I was only able to complete the patch series and
> resubmit the patch, and I thought we could discuss the test results from the
> patch series. The issue was initially found with EEE on GPY PHY working
> together with ptp4l, and it did not meet the expected results. There are
> many things that need to be tested, as it is not only Marvell PHY that has
> the issue.
Hm, the PTP issue with EEE is usually related to PHYs implementing the
EEE without MAC/LPI support. This PHYs are buffering frames and changing
the transmission time, so if the time stamp is made by MAC it will have
different real transmission time. So far i know, Atheros and Realtek
implement it, even if it is not always officially documented, it can be
tested.
Regards,
Oleksij
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Powered by blists - more mailing lists