[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <4483a757-db62-4489-aac0-7a33d44a4cba@kernel.org>
Date: Tue, 19 Nov 2024 14:02:51 +0100
From: Krzysztof Kozlowski <krzk@...nel.org>
To: Niko Pasaloukos <nikolaos.pasaloukos@...ize.com>,
Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, James Cowgill
<james.cowgill@...ize.com>, Matt Redfearn <matthew.redfearn@...ize.com>,
Neil Jones <neil.jones@...ize.com>, Catalin Marinas
<catalin.marinas@....com>, Will Deacon <will@...nel.org>,
Arnd Bergmann <arnd@...db.de>, Olof Johansson <olof@...om.net>
Cc: "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"soc@...ts.linux.dev" <soc@...ts.linux.dev>
Subject: Re: [PATCH v5 4/6] arm64: Add initial support for Blaize BLZP1600 CB2
On 15/11/2024 15:58, Niko Pasaloukos wrote:
> Add support for the Blaize CB2 development board based on
> the BLZP1600 SoC. This consists of a Carrier-Board-2 and a
> System-on-Module.
>
> Both BLZP1600 SoM and CB2 are available as products.
> CB2 (Pathfinder) has multiple peripherals like UART, I2C,
> SPI, GPIO, CSI (camera), DSI (display), USB-3.0 and Ethernet.
>
> Enable support for the Cryptocell, UART and I2C which are
> already fully supported by the drivers.
>
> The blaize-blzp1600.dtsi is the common part for the SoC,
> blaize-blzp1600-som.dtsi is the common part for the SoM and
> blaize-blzp1600-cb2.dts is the board specific file.
>
> Co-developed-by: James Cowgill <james.cowgill@...ize.com>
> Signed-off-by: James Cowgill <james.cowgill@...ize.com>
> Co-developed-by: Matt Redfearn <matt.redfearn@...ize.com>
> Signed-off-by: Matt Redfearn <matt.redfearn@...ize.com>
> Co-developed-by: Neil Jones <neil.jones@...ize.com>
> Signed-off-by: Neil Jones <neil.jones@...ize.com>
> Signed-off-by: Nikolaos Pasaloukos <nikolaos.pasaloukos@...ize.com>
Subject prefix should be:
arm64: dts:
or
arm64: dts: blaize:
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Best regards,
Krzysztof
Powered by blists - more mailing lists