linux-kernel - [PATCH v4 0/1] riscv: dts: starfive: jh7110-milkv-mars: enable usb0 host function

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <20241119014449.49936-1-e@freeshell.de>
Date: Mon, 18 Nov 2024 17:44:34 -0800
From: E Shattow <e@...eshell.de>
To: Jisheng Zhang <jszhang@...nel.org>
Cc: E Shattow <e@...eshell.de>,
	Emil Renner Berthing <kernel@...il.dk>,
	Conor Dooley <conor@...nel.org>,
	Rob Herring <robh@...nel.org>,
	Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Paul Walmsley <paul.walmsley@...ive.com>,
	Palmer Dabbelt <palmer@...belt.com>,
	Albert Ou <aou@...s.berkeley.edu>,
	linux-riscv@...ts.infradead.org,
	devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org
Subject: [PATCH v4 0/1] riscv: dts: starfive: jh7110-milkv-mars: enable usb0 host function

Enable host mode JH7110 on-chip USB for Milk-V Mars by setting host mode
and connect vbus pinctrl.

This functionality depends on setting the USB over-current register to disable at bootloader phase, for example U-Boot:
https://patchwork.ozlabs.org/project/uboot/patch/20241012031328.4268-6-minda.chen@starfivetech.com/

If the over-current register is not prepared for us then the result is no
change in functional outcome with this patch applied; there is an error
visible to the user and this additional usb configuration fails (same as
it is now). The existing three VL805 connected USB ports via PCIe on
Milk-V Mars are not affected.

Changes since v3:
 - Rebase on linux-next/master
 - use tabs for code indent

Changes since v2:
 - Rebase on 6.12

Changes since v1:
 - series name (was "[PATCH] riscv: dts: starfive: jh7110-milkv-mars: set host mode and vbus pin for on-chip USB 2.0")
 - adjust pin label to obey dtschema
 - use cover letter

E Shattow (1):
  riscv: dts: starfive: jh7110-milkv-mars: enable usb0 host function

 .../boot/dts/starfive/jh7110-milkv-mars.dts    | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

-- 
2.45.2