lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <poruhxgxnkhvqij5q7z4toxzcsk2gvkyj6ewicsfxj6xl3i3un@msgyeeyb6hsf>
Date: Wed, 20 Nov 2024 09:04:51 +0100
From: Krzysztof Kozlowski <krzk@...nel.org>
To: Krishna chaitanya chundru <quic_krichai@...cinc.com>
Cc: andersson@...nel.org, Bjorn Helgaas <bhelgaas@...gle.com>, 
	Lorenzo Pieralisi <lpieralisi@...nel.org>, Krzysztof WilczyƄski <kw@...ux.com>, 
	Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>, Rob Herring <robh@...nel.org>, 
	Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>, 
	Konrad Dybcio <konradybcio@...nel.org>, cros-qcom-dts-watchers@...omium.org, 
	Jingoo Han <jingoohan1@...il.com>, Bartosz Golaszewski <brgl@...ev.pl>, quic_vbadigan@...cinc.com, 
	linux-arm-msm@...r.kernel.org, linux-pci@...r.kernel.org, devicetree@...r.kernel.org, 
	linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3 1/6] dt-bindings: PCI: Add binding for qps615

On Tue, Nov 12, 2024 at 08:31:33PM +0530, Krishna chaitanya chundru wrote:
> Add binding describing the Qualcomm PCIe switch, QPS615,
> which provides Ethernet MAC integrated to the 3rd downstream port
> and two downstream PCIe ports.
> 
> Signed-off-by: Krishna chaitanya chundru <quic_krichai@...cinc.com>
> ---
>  .../devicetree/bindings/pci/qcom,qps615.yaml       | 205 +++++++++++++++++++++
>  1 file changed, 205 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/pci/qcom,qps615.yaml b/Documentation/devicetree/bindings/pci/qcom,qps615.yaml
> new file mode 100644
> index 000000000000..e6a63a0bb0f3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/qcom,qps615.yaml

Isn't "qcom,qps615" a SoC name? This is supposed to be matching
compatible, in your case probably qcom,qps615-whatever-this-is?

...

> +  qps615,axi-clk-freq-hz:

That's a downstream code you send us.

Anyway, why assigned clock rates do not work for you? You are
re-implementing legacy property now under different name :/


> +    description:
> +      AXI clock rate which is internal bus of the switch
> +      The switch only runs in two frequencies i.e 250MHz and 125MHz.
> +    enum: [125000000, 250000000]
> +
> +allOf:
> +  - $ref: "#/$defs/qps615-node"
> +
> +patternProperties:
> +  "@1?[0-9a-f](,[0-7])?$":
> +    description: child nodes describing the internal downstream ports
> +      the qps615 switch.
> +    type: object
> +    $ref: "#/$defs/qps615-node"
> +    unevaluatedProperties: false
> +
> +$defs:
> +  qps615-node:
> +    type: object
> +
> +    properties:
> +      qcom,l0s-entry-delay-ns:
> +        description: Aspm l0s entry delay.
> +
> +      qcom,l1-entry-delay-ns:
> +        description: Aspm l1 entry delay.
> +
> +      qcom,tx-amplitude-millivolt:

-microvolt does not work for you?

> +        $ref: /schemas/types.yaml#/definitions/uint32
> +        description: Change Tx Margin setting for low power consumption.
> +
> +      qcom,no-dfe-support:
> +        type: boolean
> +        description: Disable DFE (Decision Feedback Equalizer), which mitigates
> +          intersymbol interference and some reflections caused by impedance mismatches.
> +
> +      qcom,nfts:
> +        $ref: /schemas/types.yaml#/definitions/uint32
> +        description:
> +          Number of Fast Training Sequence (FTS) used during L0s to L0 exit
> +          for bit and Symbol lock.

Use some of these properties in the example. I saw only one.

> +
> +    allOf:
> +      - $ref: /schemas/pci/pci-bus.yaml#
> +
> +unevaluatedProperties: false
> +
> +required:
> +  - vdd18-supply
> +  - vdd09-supply
> +  - vddc-supply
> +  - vddio1-supply
> +  - vddio2-supply
> +  - vddio18-supply
> +  - i2c-parent
> +  - reset-gpios
> +
> +examples:
> +  - |
> +

Drop blank line

> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    pcie {
> +        #address-cells = <3>;
> +        #size-cells = <2>;
> +
> +        pcie@0 {
> +            device_type = "pci";
> +            reg = <0x0 0x0 0x0 0x0 0x0>;

Best regards,
Krzysztof


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ