linux-kernel - [PATCH 2/2] ARM: dts: aspeed: catalina: remove interrupt of GPIOB4 form all IOEXP

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20241121-catalina-dts-20241120-v1-2-e4212502624b@gmail.com>
Date: Thu, 21 Nov 2024 12:34:05 +0800
From: Potin Lai <potin.lai.pt@...il.com>
To: Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>, 
 Conor Dooley <conor+dt@...nel.org>, Joel Stanley <joel@....id.au>, 
 Andrew Jeffery <andrew@...econstruct.com.au>, 
 Patrick Williams <patrick@...cx.xyz>
Cc: devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org, 
 linux-aspeed@...ts.ozlabs.org, linux-kernel@...r.kernel.org, 
 Cosmo Chou <cosmo.chou@...ntatw.com>, Potin Lai <potin.lai@...ntatw.com>, 
 Potin Lai <potin.lai.pt@...il.com>
Subject: [PATCH 2/2] ARM: dts: aspeed: catalina: remove interrupt of GPIOB4
 form all IOEXP

We notice this interrupt pin always keep low, it cause BMC stuck at boot
up until kernel disabling IRQ of this GPIO pin.

Remove the interrupt of GPIOB4 pin from all IOEXP for now to avoid BMC
get stuck.

Signed-off-by: Potin Lai <potin.lai.pt@...il.com>
---
 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
index 417c0d12635c..3822bb3c9243 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
@@ -593,8 +593,6 @@ io_expander0: gpio@20 {
 		reg = <0x20>;
 		gpio-controller;
 		#gpio-cells = <2>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <ASPEED_GPIO(B, 4) IRQ_TYPE_LEVEL_LOW>;
 	};
 
 	// Module 1 IOEXP
@@ -603,8 +601,6 @@ io_expander1: gpio@21 {
 		reg = <0x21>;
 		gpio-controller;
 		#gpio-cells = <2>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <ASPEED_GPIO(B, 4) IRQ_TYPE_LEVEL_LOW>;
 	};
 
 	// HMC IOEXP
@@ -613,8 +609,6 @@ io_expander2: gpio@27 {
 		reg = <0x27>;
 		gpio-controller;
 		#gpio-cells = <2>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <ASPEED_GPIO(B, 4) IRQ_TYPE_LEVEL_LOW>;
 	};
 
 	// Module 0 EEPROM

-- 
2.31.1