| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20241121025323.1403409-4-peteryin.openbmc@gmail.com>
Date: Thu, 21 Nov 2024 10:53:20 +0800
From: Peter Yin <peteryin.openbmc@...il.com>
To: Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Conor Dooley <conor+dt@...nel.org>,
Joel Stanley <joel@....id.au>,
Andrew Jeffery <andrew@...econstruct.com.au>,
devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-aspeed@...ts.ozlabs.org,
linux-kernel@...r.kernel.org
Subject: [PATCH v2 3/6] ARM: dts: aspeed: Harma: Revise GPIO line name
Add:
"ac-power-button", // AC power button input signal
"asic0-card-type-detection0-n", // ASIC0 detection signal 0
"asic0-card-type-detection1-n", // ASIC0 detection signal 1
"asic0-card-type-detection2-n", // ASIC0 detection signal 2
"cpu0-prochot-alert", // CPU 0 processor hot alert signal
"cpu0-thermtrip-alert", // CPU 0 thermal trip alert signal
"irq-uv-detect-alert", // IRQ for undervoltage detection alert
"irq-hsc-alert", // IRQ for hot-swap controller alert
"uart-switch-button", // Button to switch UART interfaces
"uart-switch-lsb", // UART switch signal, least significant bit
"uart-switch-msb", // UART switch signal, most significant bit
"leakage-detect-alert", // Leakage detection alert signal
"power-card-enable", // Power card enable signal
"power-fault-n", // Power fault signal
"power-hsc-good", // Hot-swap controller power good signal
"power-chassis-good", // Chassis power good signal
"presence-post-card", // Presence for debug card
"presence-cmm", // Presence for chassis manager
"pvdd11-ocp-alert", // PVDD11 overcurrent protection alert signal
"reset-control-cmos-clear", // Reset control signal for clearing CMOS
"reset-cause-pcie", // Reset cause indication for PCIe
"reset-cause-platrst", // Reset cause indication for platform reset
"P0_I3C_APML_ALERT_L", // APML alert signal
Rename:
// Rename the power signal to match PSM defined
"power-cpu-good" to "host0-ready",
"host-ready-n" to "post-end-n
Signed-off-by: Peter Yin <peteryin.openbmc@...il.com>
---
.../dts/aspeed/aspeed-bmc-facebook-harma.dts | 58 ++++++++++++-------
1 file changed, 37 insertions(+), 21 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
index fd85d5e34a55..ce1731bdc1af 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
@@ -416,12 +416,6 @@ gpio@31 {
reg = <0x31>;
gpio-controller;
#gpio-cells = <2>;
-
- gpio-line-names =
- "","","","",
- "","","presence-cmm","",
- "","","","",
- "","","","";
};
// Aegis FRU
@@ -559,7 +553,8 @@ &gpio0 {
/*A0-A7*/ "","","","","","","","",
/*B0-B7*/ "","","","",
"bmc-spi-mux-select-0","led-identify","","",
- /*C0-C7*/ "","","","","","","","",
+ /*C0-C7*/ "reset-cause-platrst","","","","",
+ "power-hsc-good","power-chassis-good","",
/*D0-D7*/ "","","sol-uart-select","","","","","",
/*E0-E7*/ "","","","","","","","",
/*F0-F7*/ "","","","","","","","",
@@ -568,7 +563,8 @@ &gpio0 {
/*I0-I7*/ "","","","","","","","",
/*J0-J7*/ "","","","","","","","",
/*K0-K7*/ "","","","","","","","",
- /*L0-L7*/ "","","","","","","","",
+ /*L0-L7*/ "","","","",
+ "leakage-detect-alert","","","",
/*M0-M7*/ "","","","","","","","",
/*N0-N7*/ "led-postcode-0","led-postcode-1",
"led-postcode-2","led-postcode-3",
@@ -577,18 +573,29 @@ &gpio0 {
/*O0-O7*/ "","","","","","","","",
/*P0-P7*/ "power-button","power-host-control",
"reset-button","","led-power","","","",
- /*Q0-Q7*/ "","","","","","power-chassis-control","","",
+ /*Q0-Q7*/
+ "","","","",
+ "","power-chassis-control","","uart-switch-button",
/*R0-R7*/ "","","","","","","","",
/*S0-S7*/ "","","","","","","","",
/*T0-T7*/ "","","","","","","","",
/*U0-U7*/ "","","","","","","led-identify-gate","",
/*V0-V7*/ "","","","",
"rtc-battery-voltage-read-enable","",
- "power-chassis-good","",
+ "","",
/*W0-W7*/ "","","","","","","","",
/*X0-X7*/ "","","","","","","","",
/*Y0-Y7*/ "","","","","","","","",
- /*Z0-Z7*/ "","","","","","","","";
+ /*Z0-Z7*/ "","","","","","","presence-post-card","";
+};
+
+&gpio1 {
+ gpio-line-names =
+ /*18A0-18A7*/ "ac-power-button","","","","","","","",
+ /*18B0-18B7*/ "","","","","","","","",
+ /*18C0-18C7*/ "","","","","","","","",
+ /*18D0-18D7*/ "","","","","","","","",
+ /*18E0-18E3*/ "","","","","","","","";
};
&sgpiom0 {
@@ -636,10 +643,10 @@ &sgpiom0 {
"","reset-control-cpu0-p1-mux",
"","reset-control-e1s-mux",
"power-host-good","reset-control-mb-mux",
- "power-cpu-good","reset-control-smb-e1s-0",
+ "host0-ready","reset-control-smb-e1s-0",
/*E0-E3 line 64-71*/
"","reset-control-smb-e1s-1",
- "host-ready-n","reset-control-srst",
+ "post-end-n","reset-control-srst",
"presence-e1s-0","reset-control-usb-hub",
"","reset-control",
/*E4-E7 line 72-79*/
@@ -656,7 +663,7 @@ &sgpiom0 {
"presence-asic-modules-0","rt-cpu0-p1-force-enable",
"presence-asic-modules-1","bios-debug-msg-disable",
"","uart-control-buffer-select",
- "","ac-control-n",
+ "presence-cmm","ac-control-n",
/*G0-G3 line 96-103*/
"FM_CPU_CORETYPE2","",
"FM_CPU_CORETYPE1","",
@@ -668,7 +675,7 @@ &sgpiom0 {
"FM_BOARD_REV_ID2","",
"FM_BOARD_REV_ID1","",
/*H0-H3 line 112-119*/
- "FM_BOARD_REV_ID0","",
+ "FM_BOARD_REV_ID0","reset-control-cmos-clear",
"","","","","","",
/*H4-H7 line 120-127*/
"","",
@@ -683,22 +690,31 @@ &sgpiom0 {
/*I4-I7 line 136-143*/
"","","","","","","","",
/*J0-J3 line 144-151*/
- "","","","","","","","",
+ "","","power-card-enable","","","","","",
/*J4-J7 line 152-159*/
"SLOT_ID_BCB_0","",
"SLOT_ID_BCB_1","",
"SLOT_ID_BCB_2","",
"SLOT_ID_BCB_3","",
/*K0-K3 line 160-167*/
- "","","","","","","","",
+ "","","","","","","P0_I3C_APML_ALERT_L","",
/*K4-K7 line 168-175*/
- "","","","","","","","",
+ "","","","","","","irq-uv-detect-alert","",
/*L0-L3 line 176-183*/
- "","","","","","","","",
+ "irq-hsc-alert","",
+ "cpu0-prochot-alert","",
+ "cpu0-thermtrip-alert","",
+ "reset-cause-pcie","",
/*L4-L7 line 184-191*/
- "","","","","","","","",
+ "pvdd11-ocp-alert","",
+ "power-fault-n","",
+ "asic0-card-type-detection0-n","",
+ "asic0-card-type-detection1-n","",
/*M0-M3 line 192-199*/
- "","","","","","","","",
+ "asic0-card-type-detection2-n","",
+ "uart-switch-lsb","",
+ "uart-switch-msb","",
+ "","",
/*M4-M7 line 200-207*/
"","","","","","","","",
/*N0-N3 line 208-215*/
--
2.25.1
Powered by blists - more mailing lists