Message-ID: <e344399f-2123-4f73-ad76-a2daa63259a7@amd.com>
Date: Thu, 21 Nov 2024 14:29:02 -0600
From: "Moger, Babu" <babu.moger@....com>
To: Reinette Chatre <reinette.chatre@...el.com>, corbet@....net,
 tglx@...utronix.de, mingo@...hat.com, bp@...en8.de,
 dave.hansen@...ux.intel.com
Cc: fenghua.yu@...el.com, x86@...nel.org, hpa@...or.com, thuth@...hat.com,
 paulmck@...nel.org, rostedt@...dmis.org, akpm@...ux-foundation.org,
 xiongwei.song@...driver.com, pawan.kumar.gupta@...ux.intel.com,
 daniel.sneddon@...ux.intel.com, perry.yuan@....com, sandipan.das@....com,
 kai.huang@...el.com, xiaoyao.li@...el.com, seanjc@...gle.com,
 jithu.joseph@...el.com, brijesh.singh@....com, xin3.li@...el.com,
 ebiggers@...gle.com, andrew.cooper3@...rix.com, mario.limonciello@....com,
 james.morse@....com, tan.shaopeng@...itsu.com, tony.luck@...el.com,
 linux-doc@...r.kernel.org, linux-kernel@...r.kernel.org,
 peternewman@...gle.com, maciej.wieczor-retman@...el.com, eranian@...gle.com,
 jpoimboe@...nel.org, thomas.lendacky@....com
Subject: Re: [PATCH v9 26/26] x86/resctrl: Introduce interface to modify
 assignment states of the groups

Hi Reinette,

On 11/18/24 15:51, Reinette Chatre wrote:
> Hi Babu,
> 
> On 10/29/24 4:21 PM, Babu Moger wrote:
>> Introduce the interface to assign MBM events in mbm_cntr_assign mode.
>>
>> Events can be enabled or disabled by writing to file
>> /sys/fs/resctrl/info/L3_MON/mbm_assign_control
>>
>> Format is similar to the list format with addition of opcode for the
>> assignment operation.
>>  "<CTRL_MON group>/<MON group>/<domain_id><opcode><flags>"
>>
>> Format for specific type of groups:
>>
>>  * Default CTRL_MON group:
>>          "//<domain_id><opcode><flags>"
>>
>>  * Non-default CTRL_MON group:
>>          "<CTRL_MON group>//<domain_id><opcode><flags>"
>>
>>  * Child MON group of default CTRL_MON group:
>>          "/<MON group>/<domain_id><opcode><flags>"
>>
>>  * Child MON group of non-default CTRL_MON group:
>>          "<CTRL_MON group>/<MON group>/<domain_id><opcode><flags>"
>>
>> Domain_id '*' will apply the flags on all the domains.
>>
>> Opcode can be one of the following:
>>
>>  = Update the assignment to match the flags
>>  + Assign a new MBM event without impacting existing assignments.
>>  - Unassign a MBM event from currently assigned events.
>>
>> Assignment flags can be one of the following:
>>  t  MBM total event
>>  l  MBM local event
>>  tl Both total and local MBM events
>>  _  None of the MBM events. Valid only with '=' opcode. This flag cannot
>>     be combined with other flags.
>>
>> Signed-off-by: Babu Moger <babu.moger@....com>
>> ---
>> v9: Fixed handling special case '//0=' and '//".
>>     Removed extra strstr() call.
>>     Added generic failure text when assignment operation fails.
>>     Corrected user documentation format texts.
>>
>> v8: Moved unassign as the first action during the assign modification.
>>     Assign none "_" takes priority. Cannot be mixed with other flags.
>>     Updated the documentation and .rst file format. htmldoc looks ok.
>>
>> v7: Simplified the parsing (strsep(&token, "//") in rdtgroup_mbm_assign_control_write().
>>     Added mutex lock in rdtgroup_mbm_assign_control_write() while processing.
>>     Renamed rdtgroup_find_grp to rdtgroup_find_grp_by_name.
>>     Fixed rdtgroup_str_to_mon_state to return error for invalid flags.
>>     Simplified the calls rdtgroup_assign_cntr by merging few functions earlier.
>>     Removed ABMC reference in FS code.
>>     Reinette commented about handling the combination of flags like 'lt_' and '_lt'.
>>     Not sure if we need to change the behaviour here. Processed them sequencially right now.
>>     Users have the liberty to pass the flags. Restricting it might be a problem later.
>>
>> v6: Added support assign all if domain id is '*'
>>     Fixed the allocation of counter id if it not assigned already.
>>
>> v5: Interface name changed from mbm_assign_control to mbm_control.
>>     Fixed opcode and flags combination.
>>     '=_" is valid.
>>     "-_" amd "+_" is not valid.
>>     Minor message update.
>>     Renamed the function with prefix - rdtgroup_.
>>     Corrected few documentation mistakes.
>>     Rebase related changes after SNC support.
>>
>> v4: Added domain specific assignments. Fixed the opcode parsing.
>>
>> v3: New patch.
>>     Addresses the feedback to provide the global assignment interface.
>>     https://lore.kernel.org/lkml/c73f444b-83a1-4e9a-95d3-54c5165ee782@intel.com/
>> ---
>>  Documentation/arch/x86/resctrl.rst     | 116 +++++++++++-
>>  arch/x86/kernel/cpu/resctrl/internal.h |  10 ++
>>  arch/x86/kernel/cpu/resctrl/rdtgroup.c | 236 ++++++++++++++++++++++++-
>>  3 files changed, 360 insertions(+), 2 deletions(-)
>>
>> diff --git a/Documentation/arch/x86/resctrl.rst b/Documentation/arch/x86/resctrl.rst
>> index 590727bec44b..d0a107d251ec 100644
>> --- a/Documentation/arch/x86/resctrl.rst
>> +++ b/Documentation/arch/x86/resctrl.rst
>> @@ -347,7 +347,8 @@ with the following files:
>>  	 t  MBM total event is assigned.
>>  	 l  MBM local event is assigned.
>>  	 tl Both MBM total and local events are assigned.
>> -	 _  None of the MBM events are assigned.
>> +	 _  None of the MBM events are assigned. Only works with opcode '=' for write
>> +	    and cannot be combined with other flags.
>>  
>>  	Examples:
>>  	::
>> @@ -365,6 +366,119 @@ with the following files:
>>  	There are four resctrl groups. All the groups have total and local MBM events
>>  	assigned on domain 0 and 1.
>>  
>> +	Assignment state can be updated by writing to the interface.
> 
> This is already a bit far from original definition so it may help to be specific what is
> meant with "the interface". For example,
> 
> 	Assignment state can be updated by writing to "mbm_assign_control".

Sure.

> 
>> +
>> +	Format is similar to the list format with addition of opcode for the
>> +	assignment operation.
>> +
>> +		"<CTRL_MON group>/<MON group>/<domain_id><opcode><flags>"
>> +
>> +	Format for each type of groups:
> 
> "Format for each type of group"  or "Format of each type of group"?

Sure.

> 
>> +
>> +        * Default CTRL_MON group:
>> +                "//<domain_id><opcode><flags>"
>> +
>> +        * Non-default CTRL_MON group:
>> +                "<CTRL_MON group>//<domain_id><opcode><flags>"
>> +
>> +        * Child MON group of default CTRL_MON group:
>> +                "/<MON group>/<domain_id><opcode><flags>"
>> +
>> +        * Child MON group of non-default CTRL_MON group:
>> +                "<CTRL_MON group>/<MON group>/<domain_id><opcode><flags>"
>> +
>> +	Domain_id '*' will apply the flags on all the domains.
> 
> "apply the flags on all the domains" -> "apply the flags to all the domains"?

Sure.

> 
>> +
>> +	Opcode can be one of the following:
>> +	::
>> +
>> +	 = Update the assignment to match the MBM event.
>> +	 + Assign a new MBM event without impacting existing assignments.
>> +	 - Unassign a MBM event from currently assigned events.
>> +
>> +	Examples:
>> +	Initial group status:
>> +	::
>> +
>> +	  # cat /sys/fs/resctrl/info/L3_MON/mbm_assign_control
>> +	  non_default_ctrl_mon_grp//0=tl;1=tl;
>> +	  non_default_ctrl_mon_grp/child_non_default_mon_grp/0=tl;1=tl;
>> +	  //0=tl;1=tl;
>> +	  /child_default_mon_grp/0=tl;1=tl;
>> +
>> +	To update the default group to assign only total MBM event on domain 0:
>> +	::
>> +
>> +	  # echo "//0=t" > /sys/fs/resctrl/info/L3_MON/mbm_assign_control
>> +
>> +	Assignment status after the update:
>> +	::
>> +
>> +	  # cat /sys/fs/resctrl/info/L3_MON/mbm_assign_control
>> +	  non_default_ctrl_mon_grp//0=tl;1=tl;
>> +	  non_default_ctrl_mon_grp/child_non_default_mon_grp/0=tl;1=tl;
>> +	  //0=t;1=tl;
>> +	  /child_default_mon_grp/0=tl;1=tl;
>> +
>> +	To update the MON group child_default_mon_grp to remove total MBM event on domain 1:
>> +	::
>> +
>> +	  # echo "/child_default_mon_grp/1-t" > /sys/fs/resctrl/info/L3_MON/mbm_assign_control
>> +
>> +	Assignment status after the update:
>> +	::
>> +
>> +	  # cat /sys/fs/resctrl/info/L3_MON/mbm_assign_control
>> +	  non_default_ctrl_mon_grp//0=tl;1=tl;
>> +	  non_default_ctrl_mon_grp/child_non_default_mon_grp/0=tl;1=tl;
>> +	  //0=t;1=tl;
>> +	  /child_default_mon_grp/0=tl;1=l;
>> +
>> +	To update the MON group non_default_ctrl_mon_grp/child_non_default_mon_grp to unassign
>> +	both local and total MBM events on domain 1:
>> +	::
>> +
>> +	  # echo "non_default_ctrl_mon_grp/child_non_default_mon_grp/1=_" >
>> +			/sys/fs/resctrl/info/L3_MON/mbm_assign_control
>> +
>> +	Assignment status after the update:
>> +	::
>> +
>> +	  # cat /sys/fs/resctrl/info/L3_MON/mbm_assign_control
>> +	  non_default_ctrl_mon_grp//0=tl;1=tl;
>> +	  non_default_ctrl_mon_grp/child_non_default_mon_grp/0=tl;1=_;
>> +	  //0=t;1=tl;
>> +	  /child_default_mon_grp/0=tl;1=l;
>> +
>> +	To update the default group to add a local MBM event domain 0.
> 
> "." -> ":"

Sure.

> 
>> +	::
>> +
>> +	  # echo "//0+l" > /sys/fs/resctrl/info/L3_MON/mbm_assign_control
>> +
>> +	Assignment status after the update:
>> +	::
>> +
>> +	  # cat /sys/fs/resctrl/info/L3_MON/mbm_assign_control
>> +	  non_default_ctrl_mon_grp//0=tl;1=tl;
>> +	  non_default_ctrl_mon_grp/child_non_default_mon_grp/0=tl;1=_;
>> +	  //0=tl;1=tl;
>> +	  /child_default_mon_grp/0=tl;1=l;
>> +
>> +	To update the non default CTRL_MON group non_default_ctrl_mon_grp to unassign all the
>> +	MBM events on all the domains.
> 
> "." -> ":"

Sure.

> 
>> +	::
>> +
>> +	  # echo "non_default_ctrl_mon_grp//*=_" > /sys/fs/resctrl/info/L3_MON/mbm_assign_control
>> +
>> +	Assignment status after the update:
>> +	::
>> +
>> +	  # cat /sys/fs/resctrl/info/L3_MON/mbm_assign_control
>> +	  non_default_ctrl_mon_grp//0=_;1=_;
>> +	  non_default_ctrl_mon_grp/child_non_default_mon_grp/0=tl;1=_;
>> +	  //0=tl;1=tl;
>> +	  /child_default_mon_grp/0=tl;1=l;
>> +
>>  "max_threshold_occupancy":
>>  		Read/write file provides the largest value (in
>>  		bytes) at which a previously used LLC_occupancy
>> diff --git a/arch/x86/kernel/cpu/resctrl/internal.h b/arch/x86/kernel/cpu/resctrl/internal.h
>> index b90d8c90b4b6..3ccaea6a2803 100644
>> --- a/arch/x86/kernel/cpu/resctrl/internal.h
>> +++ b/arch/x86/kernel/cpu/resctrl/internal.h
>> @@ -74,6 +74,16 @@
>>   */
>>  #define MBM_EVENT_ARRAY_INDEX(_event) ((_event) - 2)
>>  
>> +/*
>> + * Assignment flags for mbm_cntr_assign feature
>> + */
> 
> "mbm_cntr_assign feature" -> "mbm_cntr_assign mode"?

Sure.

> 
>> +enum {
>> +	ASSIGN_NONE	= 0,
>> +	ASSIGN_TOTAL	= BIT(QOS_L3_MBM_TOTAL_EVENT_ID),
>> +	ASSIGN_LOCAL	= BIT(QOS_L3_MBM_LOCAL_EVENT_ID),
>> +	ASSIGN_INVALID,
>> +};
>> +
>>  /**
>>   * cpumask_any_housekeeping() - Choose any CPU in @mask, preferring those that
>>   *			        aren't marked nohz_full
>> diff --git a/arch/x86/kernel/cpu/resctrl/rdtgroup.c b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
>> index 5cc40eacbe85..9fe419d0c536 100644
>> --- a/arch/x86/kernel/cpu/resctrl/rdtgroup.c
>> +++ b/arch/x86/kernel/cpu/resctrl/rdtgroup.c
>> @@ -1082,6 +1082,239 @@ static int rdtgroup_mbm_assign_control_show(struct kernfs_open_file *of,
>>  	return 0;
>>  }
>>  
>> +static int rdtgroup_str_to_mon_state(char *flag)
> 
> It seems strange to me that a variable used to contain flag bits
> is of type int. Why is it not unsigned?

Will change it to "unsigned int"

> 
>> +{
>> +	int i, mon_state = ASSIGN_NONE;
>> +
>> +	if (!strlen(flag))
>> +		return ASSIGN_INVALID;
>> +
>> +	for (i = 0; i < strlen(flag); i++) {
>> +		switch (*(flag + i)) {
>> +		case 't':
>> +			mon_state |= ASSIGN_TOTAL;
>> +			break;
>> +		case 'l':
>> +			mon_state |= ASSIGN_LOCAL;
>> +			break;
>> +		case '_':
>> +			return ASSIGN_NONE;
>> +		default:
>> +			return ASSIGN_INVALID;
>> +		}
>> +	}
>> +
>> +	return mon_state;
>> +}
>> +
>> +static struct rdtgroup *rdtgroup_find_grp_by_name(enum rdt_group_type rtype,
>> +						  char *p_grp, char *c_grp)
>> +{
>> +	struct rdtgroup *rdtg, *crg;
>> +
>> +	if (rtype == RDTCTRL_GROUP && *p_grp == '\0') {
>> +		return &rdtgroup_default;
>> +	} else if (rtype == RDTCTRL_GROUP) {
>> +		list_for_each_entry(rdtg, &rdt_all_groups, rdtgroup_list)
>> +			if (!strcmp(p_grp, rdtg->kn->name))
>> +				return rdtg;
>> +	} else if (rtype == RDTMON_GROUP) {
>> +		list_for_each_entry(rdtg, &rdt_all_groups, rdtgroup_list) {
>> +			if (!strcmp(p_grp, rdtg->kn->name)) {
>> +				list_for_each_entry(crg, &rdtg->mon.crdtgrp_list,
>> +						    mon.crdtgrp_list) {
>> +					if (!strcmp(c_grp, crg->kn->name))
>> +						return crg;
>> +				}
>> +			}
>> +		}
>> +	}
>> +
>> +	return NULL;
>> +}
>> +
>> +static int rdtgroup_process_flags(struct rdt_resource *r,
>> +				  enum rdt_group_type rtype,
>> +				  char *p_grp, char *c_grp, char *tok)
>> +{
>> +	int op, mon_state, assign_state, unassign_state;
> 
> Same comment about type ... these *_state variables are used to contain
> bits representing the flags of the various states. An unsigned variable
> seems more appropriate.

Will change into unsigned int.

> 
>> +	char *dom_str, *id_str, *op_str;
>> +	struct rdt_mon_domain *d;
>> +	struct rdtgroup *rdtgrp;
>> +	unsigned long dom_id;
>> +	int ret, found = 0;
> 
> Could found be boolean?

Sure.

> 
>> +
>> +	rdtgrp = rdtgroup_find_grp_by_name(rtype, p_grp, c_grp);
>> +
>> +	if (!rdtgrp) {
>> +		rdt_last_cmd_puts("Not a valid resctrl group\n");
>> +		return -EINVAL;
>> +	}
>> +
>> +next:
>> +	if (!tok || tok[0] == '\0')
>> +		return 0;
>> +
>> +	/* Start processing the strings for each domain */
>> +	dom_str = strim(strsep(&tok, ";"));
>> +
>> +	op_str = strpbrk(dom_str, "=+-");
>> +
>> +	if (op_str) {
>> +		op = *op_str;
>> +	} else {
>> +		rdt_last_cmd_puts("Missing operation =, +, - character\n");
>> +		return -EINVAL;
>> +	}
>> +
>> +	id_str = strsep(&dom_str, "=+-");
>> +
>> +	/* Check for domain id '*' which means all domains */
>> +	if (id_str && *id_str == '*') {
>> +		d = NULL;
>> +		goto check_state;
>> +	} else if (!id_str || kstrtoul(id_str, 10, &dom_id)) {
>> +		rdt_last_cmd_puts("Missing domain id\n");
>> +		return -EINVAL;
>> +	}
>> +
>> +	/* Verify if the dom_id is valid */
>> +	list_for_each_entry(d, &r->mon_domains, hdr.list) {
>> +		if (d->hdr.id == dom_id) {
>> +			found = 1;
>> +			break;
>> +		}
>> +	}
>> +
>> +	if (!found) {
>> +		rdt_last_cmd_printf("Invalid domain id %ld\n", dom_id);
>> +		return -EINVAL;
>> +	}
> 
> I am missing how "found" is handled on second iteration. If an invalid domain
> follows a valid domain it seems like "found" remains set from previous iteration?

Yes. It should be reset. Good catch !

> 
>> +
>> +check_state:
>> +	mon_state = rdtgroup_str_to_mon_state(dom_str);
>> +
>> +	if (mon_state == ASSIGN_INVALID) {
>> +		rdt_last_cmd_puts("Invalid assign flag\n");
>> +		goto out_fail;
>> +	}
>> +
>> +	assign_state = 0;
>> +	unassign_state = 0;
>> +
>> +	switch (op) {
>> +	case '+':
>> +		if (mon_state == ASSIGN_NONE) {
>> +			rdt_last_cmd_puts("Invalid assign opcode\n");
>> +			goto out_fail;
>> +		}
>> +		assign_state = mon_state;
>> +		break;
>> +	case '-':
>> +		if (mon_state == ASSIGN_NONE) {
>> +			rdt_last_cmd_puts("Invalid assign opcode\n");
>> +			goto out_fail;
>> +		}
>> +		unassign_state = mon_state;
>> +		break;
>> +	case '=':
>> +		assign_state = mon_state;
>> +		unassign_state = (ASSIGN_TOTAL | ASSIGN_LOCAL) & ~assign_state;
>> +		break;
>> +	default:
>> +		break;
>> +	}
>> +
>> +	if (unassign_state & ASSIGN_TOTAL) {
>> +		ret = rdtgroup_unassign_cntr_event(r, rdtgrp, d, QOS_L3_MBM_TOTAL_EVENT_ID);
>> +		if (ret)
>> +			goto out_fail;
>> +	}
>> +
>> +	if (unassign_state & ASSIGN_LOCAL) {
>> +		ret = rdtgroup_unassign_cntr_event(r, rdtgrp, d, QOS_L3_MBM_LOCAL_EVENT_ID);
>> +		if (ret)
>> +			goto out_fail;
>> +	}
>> +
>> +	if (assign_state & ASSIGN_TOTAL) {
>> +		ret = rdtgroup_assign_cntr_event(r, rdtgrp, d, QOS_L3_MBM_TOTAL_EVENT_ID);
>> +		if (ret)
>> +			goto out_fail;
>> +	}
>> +
>> +	if (assign_state & ASSIGN_LOCAL) {
>> +		ret = rdtgroup_assign_cntr_event(r, rdtgrp, d, QOS_L3_MBM_LOCAL_EVENT_ID);
>> +		if (ret)
>> +			goto out_fail;
>> +	}
>> +
>> +	goto next;
>> +
>> +out_fail:
>> +	rdt_last_cmd_printf("Assign operation '%c%s' failed on the group %s/%s/\n",
>> +			    op, dom_str, p_grp, c_grp);
>> +
> 
> Can the domain id be printed also? This seems only piece missing to understand what failed.

Sure. Need to add a check if it is '*' or actual domain id.

Will do.

> 
>> +	return -EINVAL;
>> +}
>> +
>> +static ssize_t rdtgroup_mbm_assign_control_write(struct kernfs_open_file *of,
>> +						 char *buf, size_t nbytes, loff_t off)
>> +{
>> +	struct rdt_resource *r = of->kn->parent->priv;
>> +	char *token, *cmon_grp, *mon_grp;
>> +	enum rdt_group_type rtype;
>> +	int ret;
>> +
>> +	/* Valid input requires a trailing newline */
>> +	if (nbytes == 0 || buf[nbytes - 1] != '\n')
>> +		return -EINVAL;
>> +
>> +	buf[nbytes - 1] = '\0';
>> +
>> +	cpus_read_lock();
>> +	mutex_lock(&rdtgroup_mutex);
>> +
>> +	rdt_last_cmd_clear();
>> +
>> +	if (!resctrl_arch_mbm_cntr_assign_enabled(r)) {
>> +		rdt_last_cmd_puts("mbm_cntr_assign mode is not enabled\n");
>> +		mutex_unlock(&rdtgroup_mutex);
>> +		cpus_read_unlock();
>> +		return -EINVAL;
>> +	}
>> +
>> +	while ((token = strsep(&buf, "\n")) != NULL) {
>> +		/*
>> +		 * The write command follows the following format:
>> +		 * “<CTRL_MON group>/<MON group>/<domain_id><opcode><flags>”
>> +		 * Extract the CTRL_MON group.
>> +		 */
>> +		cmon_grp = strsep(&token, "/");
>> +
>> +		/*
>> +		 * Extract the MON_GROUP.
>> +		 * strsep returns empty string for contiguous delimiters.
>> +		 * Empty mon_grp here means it is a RDTCTRL_GROUP.
>> +		 */
>> +		mon_grp = strsep(&token, "/");
>> +
>> +		if (*mon_grp == '\0')
>> +			rtype = RDTCTRL_GROUP;
>> +		else
>> +			rtype = RDTMON_GROUP;
>> +
>> +		ret = rdtgroup_process_flags(r, rtype, cmon_grp, mon_grp, token);
>> +		if (ret)
>> +			break;
>> +	}
>> +
>> +	mutex_unlock(&rdtgroup_mutex);
>> +	cpus_read_unlock();
>> +
>> +	return ret ?: nbytes;
>> +}
>> +
>>  #ifdef CONFIG_PROC_CPU_RESCTRL
>>  
>>  /*
>> @@ -2383,9 +2616,10 @@ static struct rftype res_common_files[] = {
>>  	},
>>  	{
>>  		.name		= "mbm_assign_control",
>> -		.mode		= 0444,
>> +		.mode		= 0644,
>>  		.kf_ops		= &rdtgroup_kf_single_ops,
>>  		.seq_show	= rdtgroup_mbm_assign_control_show,
>> +		.write		= rdtgroup_mbm_assign_control_write,
>>  	},
>>  	{
>>  		.name		= "mbm_assign_mode",
> 
> Reinette
> 
> 

-- 
Thanks
Babu Moger

Powered by blists - more mailing lists