lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list] 
Message-ID: <20241122224715.171751-8-dwmw2@infradead.org>
Date: Fri, 22 Nov 2024 22:38:16 +0000
From: David Woodhouse <dwmw2@...radead.org>
To: kexec@...ts.infradead.org
Cc: Thomas Gleixner <tglx@...utronix.de>,
	Ingo Molnar <mingo@...hat.com>,
	Borislav Petkov <bp@...en8.de>,
	Dave Hansen <dave.hansen@...ux.intel.com>,
	x86@...nel.org,
	"H. Peter Anvin" <hpa@...or.com>,
	David Woodhouse <dwmw@...zon.co.uk>,
	"Kirill A. Shutemov" <kirill.shutemov@...ux.intel.com>,
	Kai Huang <kai.huang@...el.com>,
	Nikolay Borisov <nik.borisov@...e.com>,
	linux-kernel@...r.kernel.org,
	Simon Horman <horms@...nel.org>,
	Dave Young <dyoung@...hat.com>,
	Peter Zijlstra <peterz@...radead.org>,
	jpoimboe@...nel.org
Subject: [RFC PATCH v2 07/16] x86/kexec: Add data section to relocate_kernel

From: David Woodhouse <dwmw@...zon.co.uk>

Now that the relocate_kernel page is handled sanely by a linker script
we can have actual data, and just use %rip-relative addressing to access
it.

Signed-off-by: David Woodhouse <dwmw@...zon.co.uk>
---
 arch/x86/kernel/machine_kexec_64.c   |  7 +++-
 arch/x86/kernel/relocate_kernel_64.S | 62 ++++++++++++++--------------
 arch/x86/kernel/vmlinux.lds.S        |  1 +
 3 files changed, 37 insertions(+), 33 deletions(-)

diff --git a/arch/x86/kernel/machine_kexec_64.c b/arch/x86/kernel/machine_kexec_64.c
index 048868d868ce..123e9544506b 100644
--- a/arch/x86/kernel/machine_kexec_64.c
+++ b/arch/x86/kernel/machine_kexec_64.c
@@ -383,7 +383,12 @@ void machine_kexec(struct kimage *image)
 		page_list[PA_SWAP_PAGE] = (page_to_pfn(image->swap_page)
 						<< PAGE_SHIFT);
 
-	relocate_kernel_ptr = control_page;
+	/*
+	 * Allow for the possibility that relocate_kernel might not be at
+	 * the very start of the page.
+	 */
+	relocate_kernel_ptr = control_page + (unsigned long)relocate_kernel -
+		reloc_start;
 
 	/*
 	 * The segment registers are funny things, they have both a
diff --git a/arch/x86/kernel/relocate_kernel_64.S b/arch/x86/kernel/relocate_kernel_64.S
index 085dddf79476..445ca56dabbe 100644
--- a/arch/x86/kernel/relocate_kernel_64.S
+++ b/arch/x86/kernel/relocate_kernel_64.S
@@ -23,23 +23,21 @@
 #define PAGE_ATTR (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY)
 
 /*
- * control_page + KEXEC_CONTROL_CODE_MAX_SIZE
- * ~ control_page + PAGE_SIZE are used as data storage and stack for
- * jumping back
+ * The .text.relocate_kernel and .data.relocate_kernel sections are copied
+ * into the control page, and the remainder of the page is used as the stack.
  */
-#define DATA(offset)		(KEXEC_CONTROL_CODE_MAX_SIZE+(offset))
 
+	.section .data.relocate_kernel,"a";
 /* Minimal CPU state */
-#define RSP			DATA(0x0)
-#define CR0			DATA(0x8)
-#define CR3			DATA(0x10)
-#define CR4			DATA(0x18)
-
-/* other data */
-#define CP_PA_TABLE_PAGE	DATA(0x20)
-#define CP_PA_SWAP_PAGE		DATA(0x28)
-#define CP_PA_BACKUP_PAGES_MAP	DATA(0x30)
-#define CP_VA_CONTROL_PAGE	DATA(0x38)
+SYM_DATA_LOCAL(saved_rsp, .quad 0)
+SYM_DATA_LOCAL(saved_cr0, .quad 0)
+SYM_DATA_LOCAL(saved_cr3, .quad 0)
+SYM_DATA_LOCAL(saved_cr4, .quad 0)
+	/* other data */
+SYM_DATA_LOCAL(va_control_page, .quad 0)
+SYM_DATA_LOCAL(pa_table_page, .quad 0)
+SYM_DATA_LOCAL(pa_swap_page, .quad 0)
+SYM_DATA_LOCAL(pa_backup_pages_map, .quad 0)
 
 	.section .text.relocate_kernel,"ax";
 	.code64
@@ -63,14 +61,13 @@ SYM_CODE_START_NOALIGN(relocate_kernel)
 	pushq %r15
 	pushf
 
-	movq	PTR(VA_CONTROL_PAGE)(%rsi), %r11
-	movq	%rsp, RSP(%r11)
+	movq	%rsp, saved_rsp(%rip)
 	movq	%cr0, %rax
-	movq	%rax, CR0(%r11)
+	movq	%rax, saved_cr0(%rip)
 	movq	%cr3, %rax
-	movq	%rax, CR3(%r11)
+	movq	%rax, saved_cr3(%rip)
 	movq	%cr4, %rax
-	movq	%rax, CR4(%r11)
+	movq	%rax, saved_cr4(%rip)
 
 	/* Save CR4. Required to enable the right paging mode later. */
 	movq	%rax, %r13
@@ -83,10 +80,11 @@ SYM_CODE_START_NOALIGN(relocate_kernel)
 	movq	%r8, %r12
 
 	/*
-	 * get physical address of control page now
+	 * get physical and virtual address of control page now
 	 * this is impossible after page table switch
 	 */
 	movq	PTR(PA_CONTROL_PAGE)(%rsi), %r8
+	movq	PTR(VA_CONTROL_PAGE)(%rsi), %r11
 
 	/* get physical address of page table now too */
 	movq	PTR(PA_TABLE_PAGE)(%rsi), %r9
@@ -95,10 +93,10 @@ SYM_CODE_START_NOALIGN(relocate_kernel)
 	movq	PTR(PA_SWAP_PAGE)(%rsi), %r10
 
 	/* save some information for jumping back */
-	movq	%r9, CP_PA_TABLE_PAGE(%r11)
-	movq	%r10, CP_PA_SWAP_PAGE(%r11)
-	movq	%rdi, CP_PA_BACKUP_PAGES_MAP(%r11)
-	movq	%r11, CP_VA_CONTROL_PAGE(%r11)
+	movq	%r9, pa_table_page(%rip)
+	movq	%r10, pa_swap_page(%rip)
+	movq	%rdi, pa_backup_pages_map(%rip)
+	movq	%r11, va_control_page(%rip)
 
 	/* Save the preserve_context to %r11 as swap_pages clobbers %rcx. */
 	movq	%rcx, %r11
@@ -229,13 +227,13 @@ SYM_CODE_START_LOCAL_NOALIGN(identity_mapped)
 	/* get the re-entry point of the peer system */
 	movq	0(%rsp), %rbp
 	leaq	relocate_kernel(%rip), %r8
-	movq	CP_PA_SWAP_PAGE(%r8), %r10
-	movq	CP_PA_BACKUP_PAGES_MAP(%r8), %rdi
-	movq	CP_PA_TABLE_PAGE(%r8), %rax
+	movq	pa_swap_page(%rip), %r10
+	movq	pa_backup_pages_map(%rip), %rdi
+	movq	pa_table_page(%rip), %rax
 	movq	%rax, %cr3
 	lea	PAGE_SIZE(%r8), %rsp
 	call	swap_pages
-	movq	CP_VA_CONTROL_PAGE(%r8), %rax
+	movq	va_control_page(%rip), %rax
 	addq	$(virtual_mapped - relocate_kernel), %rax
 	pushq	%rax
 	ANNOTATE_UNRET_SAFE
@@ -246,11 +244,11 @@ SYM_CODE_END(identity_mapped)
 SYM_CODE_START_LOCAL_NOALIGN(virtual_mapped)
 	UNWIND_HINT_END_OF_STACK
 	ANNOTATE_NOENDBR // RET target, above
-	movq	RSP(%r8), %rsp
-	movq	CR4(%r8), %rax
+	movq	saved_rsp(%rip), %rsp
+	movq	saved_cr4(%rip), %rax
 	movq	%rax, %cr4
-	movq	CR3(%r8), %rax
-	movq	CR0(%r8), %r8
+	movq	saved_cr3(%rip), %rax
+	movq	saved_cr0(%rip), %r8
 	movq	%rax, %cr3
 	movq	%r8, %cr0
 
diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index 925a821134b5..324c1c42faae 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -100,6 +100,7 @@ const_pcpu_hot = pcpu_hot;
 	. = ALIGN(0x100);					\
 	__relocate_kernel_start = .;				\
 	*(.text.relocate_kernel);				\
+	*(.data.relocate_kernel);				\
 	__relocate_kernel_end = .;
 #else
 #define KEXEC_RELOCATE_KERNEL
-- 
2.47.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ