lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20241122085933.2663927-4-quic_mdalam@quicinc.com>
Date: Fri, 22 Nov 2024 14:29:33 +0530
From: Md Sadre Alam <quic_mdalam@...cinc.com>
To: <manivannan.sadhasivam@...aro.org>, <miquel.raynal@...tlin.com>,
        <richard@....at>, <vigneshr@...com>, <bbrezillon@...nel.org>,
        <linux-mtd@...ts.infradead.org>, <linux-arm-msm@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>
CC: <quic_srichara@...cinc.com>, <quic_varada@...cinc.com>,
        <quic_mdalam@...cinc.com>, <quic_nainmeht@...cinc.com>,
        <quic_laksd@...cinc.com>
Subject: [PATCH v2 3/3] mtd: rawnand: qcom: Fix read len for onfi param page

The minimum size to fetch the data from device to QPIC buffer
is 512-bytes. If size is less than 512-bytes the data will not be
protected by ECC as per QPIC standard. So while reading onfi parameter
page from NAND device setting nandc->buf_count = 512.

Cc: stable@...r.kernel.org
Fixes: 89550beb098e ("mtd: rawnand: qcom: Implement exec_op()")
Signed-off-by: Md Sadre Alam <quic_mdalam@...cinc.com>
---

Change in [v2]

* Set buf_count to 512 in the parameter page read

Change in [v1]

* This patch was not included in v1

 drivers/mtd/nand/raw/qcom_nandc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
index 31ec3db1246d..e1dca4857754 100644
--- a/drivers/mtd/nand/raw/qcom_nandc.c
+++ b/drivers/mtd/nand/raw/qcom_nandc.c
@@ -2926,7 +2926,7 @@ static int qcom_param_page_type_exec(struct nand_chip *chip,  const struct nand_
 		write_reg_dma(nandc, NAND_DEV_CMD1, 1, NAND_BAM_NEXT_SGL);
 	}
 
-	nandc->buf_count = len;
+	nandc->buf_count = 512;
 	memset(nandc->data_buffer, 0xff, nandc->buf_count);
 
 	config_nand_single_cw_page_read(chip, false, 0);
-- 
2.34.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ