[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20241122-hdmi-mode-valid-v4-7-2fee4a83ab79@linaro.org>
Date: Fri, 22 Nov 2024 11:13:03 +0200
From: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To: Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
Maxime Ripard <mripard@...nel.org>, Thomas Zimmermann <tzimmermann@...e.de>,
David Airlie <airlied@...il.com>, Simona Vetter <simona@...ll.ch>,
Chen-Yu Tsai <wens@...e.org>, Jernej Skrabec <jernej.skrabec@...il.com>,
Samuel Holland <samuel@...lland.org>,
Dave Stevenson <dave.stevenson@...pberrypi.com>,
MaĆra Canal <mcanal@...lia.com>,
Raspberry Pi Kernel Maintenance <kernel-list@...pberrypi.com>,
Andrzej Hajda <andrzej.hajda@...el.com>,
Neil Armstrong <neil.armstrong@...aro.org>, Robert Foss <rfoss@...nel.org>,
Laurent Pinchart <Laurent.pinchart@...asonboard.com>,
Jonas Karlman <jonas@...boo.se>
Cc: dri-devel@...ts.freedesktop.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-sunxi@...ts.linux.dev
Subject: [PATCH v4 07/10] drm/display: bridge_connector: use
drm_bridge_connector_mode_valid()
Use new drm_bridge_connector_mode_valid() helper if there is a HDMI
bridge in the bridge chain. This removes the need to perform TMDS char
rate check manually in the bridge driver.
Reviewed-by: Chen-Yu Tsai <wens@...e.org>
Reviewed-by: Maxime Ripard <mripard@...nel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
---
drivers/gpu/drm/display/drm_bridge_connector.c | 16 +++++++++++++++-
1 file changed, 15 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/display/drm_bridge_connector.c b/drivers/gpu/drm/display/drm_bridge_connector.c
index 320c297008aaa8b6ef5b1f4c71928849b202e8ac..512ced87ea18c74e182a558a686ddd83de891814 100644
--- a/drivers/gpu/drm/display/drm_bridge_connector.c
+++ b/drivers/gpu/drm/display/drm_bridge_connector.c
@@ -18,6 +18,7 @@
#include <drm/drm_managed.h>
#include <drm/drm_modeset_helper_vtables.h>
#include <drm/drm_probe_helper.h>
+#include <drm/display/drm_hdmi_helper.h>
#include <drm/display/drm_hdmi_state_helper.h>
/**
@@ -299,9 +300,22 @@ static int drm_bridge_connector_get_modes(struct drm_connector *connector)
return 0;
}
+static enum drm_mode_status
+drm_bridge_connector_mode_valid(struct drm_connector *connector,
+ struct drm_display_mode *mode)
+{
+ struct drm_bridge_connector *bridge_connector =
+ to_drm_bridge_connector(connector);
+
+ if (bridge_connector->bridge_hdmi)
+ return drm_hdmi_connector_mode_valid(connector, mode);
+
+ return MODE_OK;
+}
+
static const struct drm_connector_helper_funcs drm_bridge_connector_helper_funcs = {
.get_modes = drm_bridge_connector_get_modes,
- /* No need for .mode_valid(), the bridges are checked by the core. */
+ .mode_valid = drm_bridge_connector_mode_valid,
.enable_hpd = drm_bridge_connector_enable_hpd,
.disable_hpd = drm_bridge_connector_disable_hpd,
};
--
2.39.5
Powered by blists - more mailing lists