[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20241122161128.2619172-5-csokas.bence@prolan.hu>
Date: Fri, 22 Nov 2024 17:11:31 +0100
From: Csókás, Bence <csokas.bence@...lan.hu>
To: <dmaengine@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>, <linux-sunxi@...ts.linux.dev>
CC: Mesih Kilinc <mesihkilinc@...il.com>,
Csókás, Bence <csokas.bence@...lan.hu>, Vinod Koul
<vkoul@...nel.org>, Chen-Yu Tsai <wens@...e.org>, Jernej Skrabec
<jernej.skrabec@...il.com>, Samuel Holland <samuel@...lland.org>
Subject: [PATCH v6 4/5] dma-engine: sun4i: Add support for Allwinner suniv F1C100s
From: Mesih Kilinc <mesihkilinc@...il.com>
DMA of Allwinner suniv F1C100s is similar to sun4i. It has 4 NDMA, 4
DDMA channels and endpoints are different. Also F1C100s has reset bit
for DMA in CCU. Add support for it.
Signed-off-by: Mesih Kilinc <mesihkilinc@...il.com>
[ csokas.bence: Rebased on current master ]
Signed-off-by: Csókás, Bence <csokas.bence@...lan.hu>
---
drivers/dma/Kconfig | 4 +--
drivers/dma/sun4i-dma.c | 60 +++++++++++++++++++++++++++++++++++++++++
2 files changed, 62 insertions(+), 2 deletions(-)
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index d9ec1e69e428..fc25bfc356f3 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -162,8 +162,8 @@ config DMA_SA11X0
config DMA_SUN4I
tristate "Allwinner A10 DMA SoCs support"
- depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I
- default (MACH_SUN4I || MACH_SUN5I || MACH_SUN7I)
+ depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUNIV
+ default (MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUNIV)
select DMA_ENGINE
select DMA_VIRTUAL_CHANNELS
help
diff --git a/drivers/dma/sun4i-dma.c b/drivers/dma/sun4i-dma.c
index adb52a6df83a..4fc34013eff9 100644
--- a/drivers/dma/sun4i-dma.c
+++ b/drivers/dma/sun4i-dma.c
@@ -33,7 +33,11 @@
#define SUN4I_DMA_CFG_SRC_ADDR_MODE(mode) ((mode) << 5)
#define SUN4I_DMA_CFG_SRC_DRQ_TYPE(type) (type)
+#define SUNIV_DMA_CFG_DST_DATA_WIDTH(width) ((width) << 24)
+#define SUNIV_DMA_CFG_SRC_DATA_WIDTH(width) ((width) << 8)
+
#define SUN4I_MAX_BURST 8
+#define SUNIV_MAX_BURST 4
/** Normal DMA register values **/
@@ -41,6 +45,9 @@
#define SUN4I_NDMA_DRQ_TYPE_SDRAM 0x16
#define SUN4I_NDMA_DRQ_TYPE_LIMIT (0x1F + 1)
+#define SUNIV_NDMA_DRQ_TYPE_SDRAM 0x11
+#define SUNIV_NDMA_DRQ_TYPE_LIMIT (0x17 + 1)
+
/** Normal DMA register layout **/
/* Dedicated DMA source/destination address mode values */
@@ -54,6 +61,9 @@
#define SUN4I_NDMA_CFG_BYTE_COUNT_MODE_REMAIN BIT(15)
#define SUN4I_NDMA_CFG_SRC_NON_SECURE BIT(6)
+#define SUNIV_NDMA_CFG_CONT_MODE BIT(29)
+#define SUNIV_NDMA_CFG_WAIT_STATE(n) ((n) << 26)
+
/** Dedicated DMA register values **/
/* Dedicated DMA source/destination address mode values */
@@ -66,6 +76,9 @@
#define SUN4I_DDMA_DRQ_TYPE_SDRAM 0x1
#define SUN4I_DDMA_DRQ_TYPE_LIMIT (0x1F + 1)
+#define SUNIV_DDMA_DRQ_TYPE_SDRAM 0x1
+#define SUNIV_DDMA_DRQ_TYPE_LIMIT (0x9 + 1)
+
/** Dedicated DMA register layout **/
/* Dedicated DMA configuration register layout */
@@ -119,6 +132,11 @@
#define SUN4I_DMA_NR_MAX_VCHANS \
(SUN4I_NDMA_NR_MAX_VCHANS + SUN4I_DDMA_NR_MAX_VCHANS)
+#define SUNIV_NDMA_NR_MAX_CHANNELS 4
+#define SUNIV_DDMA_NR_MAX_CHANNELS 4
+#define SUNIV_NDMA_NR_MAX_VCHANS (24 * 2 - 1)
+#define SUNIV_DDMA_NR_MAX_VCHANS 10
+
/* This set of SUN4I_DDMA timing parameters were found experimentally while
* working with the SPI driver and seem to make it behave correctly */
#define SUN4I_DDMA_MAGIC_SPI_PARAMETERS \
@@ -243,6 +261,16 @@ static void set_src_data_width_a10(u32 *p_cfg, s8 data_width)
*p_cfg |= SUN4I_DMA_CFG_SRC_DATA_WIDTH(data_width);
}
+static void set_dst_data_width_f1c100s(u32 *p_cfg, s8 data_width)
+{
+ *p_cfg |= SUNIV_DMA_CFG_DST_DATA_WIDTH(data_width);
+}
+
+static void set_src_data_width_f1c100s(u32 *p_cfg, s8 data_width)
+{
+ *p_cfg |= SUNIV_DMA_CFG_SRC_DATA_WIDTH(data_width);
+}
+
static int convert_burst_a10(u32 maxburst)
{
if (maxburst > 8)
@@ -252,6 +280,15 @@ static int convert_burst_a10(u32 maxburst)
return (maxburst >> 2);
}
+static int convert_burst_f1c100s(u32 maxburst)
+{
+ if (maxburst > 4)
+ return -EINVAL;
+
+ /* 1 -> 0, 4 -> 1 */
+ return (maxburst >> 2);
+}
+
static int convert_buswidth(enum dma_slave_buswidth addr_width)
{
if (addr_width > DMA_SLAVE_BUSWIDTH_4_BYTES)
@@ -1368,8 +1405,31 @@ static struct sun4i_dma_config sun4i_a10_dma_cfg = {
.has_reset = false,
};
+static struct sun4i_dma_config suniv_f1c100s_dma_cfg = {
+ .ndma_nr_max_channels = SUNIV_NDMA_NR_MAX_CHANNELS,
+ .ndma_nr_max_vchans = SUNIV_NDMA_NR_MAX_VCHANS,
+
+ .ddma_nr_max_channels = SUNIV_DDMA_NR_MAX_CHANNELS,
+ .ddma_nr_max_vchans = SUNIV_DDMA_NR_MAX_VCHANS,
+
+ .dma_nr_max_channels = SUNIV_NDMA_NR_MAX_CHANNELS +
+ SUNIV_DDMA_NR_MAX_CHANNELS,
+
+ .set_dst_data_width = set_dst_data_width_f1c100s,
+ .set_src_data_width = set_src_data_width_f1c100s,
+ .convert_burst = convert_burst_f1c100s,
+
+ .ndma_drq_sdram = SUNIV_NDMA_DRQ_TYPE_SDRAM,
+ .ddma_drq_sdram = SUNIV_DDMA_DRQ_TYPE_SDRAM,
+
+ .max_burst = SUNIV_MAX_BURST,
+ .has_reset = true,
+};
+
static const struct of_device_id sun4i_dma_match[] = {
{ .compatible = "allwinner,sun4i-a10-dma", .data = &sun4i_a10_dma_cfg },
+ { .compatible = "allwinner,suniv-f1c100s-dma",
+ .data = &suniv_f1c100s_dma_cfg },
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, sun4i_dma_match);
--
2.34.1
Powered by blists - more mailing lists