| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAK1f24meJBDA1wzX56=2y2NQm7BVP6OudFXJuGnZuUFnZKUh+A@mail.gmail.com>
Date: Sat, 23 Nov 2024 19:52:17 +0800
From: Lance Yang <ioworker0@...il.com>
To: Barry Song <21cnbao@...il.com>
Cc: Wenchao Hao <haowenchao22@...il.com>, Jonathan Corbet <corbet@....net>,
Andrew Morton <akpm@...ux-foundation.org>, David Hildenbrand <david@...hat.com>,
Ryan Roberts <ryan.roberts@....com>, Baolin Wang <baolin.wang@...ux.alibaba.com>,
Usama Arif <usamaarif642@...il.com>, Matthew Wilcox <willy@...radead.org>,
Peter Xu <peterx@...hat.com>, linux-doc@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-mm@...ck.org
Subject: Re: [PATCH v2] mm: add per-order mTHP swap-in fallback/fallback_charge
counters
On Sat, Nov 23, 2024 at 6:27 PM Barry Song <21cnbao@...il.com> wrote:
>
> On Sat, Nov 23, 2024 at 10:36 AM Lance Yang <ioworker0@...il.com> wrote:
> >
> > Hi Wenchao,
> >
> > On Sat, Nov 23, 2024 at 12:14 AM Wenchao Hao <haowenchao22@...il.com> wrote:
> > >
> > > Currently, large folio swap-in is supported, but we lack a method to
> > > analyze their success ratio. Similar to anon_fault_fallback, we introduce
> > > per-order mTHP swpin_fallback and swpin_fallback_charge counters for
> > > calculating their success ratio. The new counters are located at:
> > >
> > > /sys/kernel/mm/transparent_hugepage/hugepages-<size>/stats/
> > > swpin_fallback
> > > swpin_fallback_charge
> > >
> > > Signed-off-by: Wenchao Hao <haowenchao22@...il.com>
> > > ---
> > > V2:
> > > Introduce swapin_fallback_charge, which increments if it fails to
> > > charge a huge page to memory despite successful allocation.
> > >
> > > Documentation/admin-guide/mm/transhuge.rst | 10 ++++++++++
> > > include/linux/huge_mm.h | 2 ++
> > > mm/huge_memory.c | 6 ++++++
> > > mm/memory.c | 2 ++
> > > 4 files changed, 20 insertions(+)
> > >
> > > diff --git a/Documentation/admin-guide/mm/transhuge.rst b/Documentation/admin-guide/mm/transhuge.rst
> > > index 5034915f4e8e..9c07612281b5 100644
> > > --- a/Documentation/admin-guide/mm/transhuge.rst
> > > +++ b/Documentation/admin-guide/mm/transhuge.rst
> > > @@ -561,6 +561,16 @@ swpin
> > > is incremented every time a huge page is swapped in from a non-zswap
> > > swap device in one piece.
> > >
> >
> > Would the following be better?
> >
> > +swpin_fallback
> > + is incremented if a huge page swapin fails to allocate or charge
> > + it and instead falls back to using small pages.
> >
> > +swpin_fallback_charge
> > + is incremented if a huge page swapin fails to charge it and instead
> > + falls back to using small pages even though the allocation was
> > + successful.
>
> much better, but it is better to align with "huge pages with
> lower orders or small pages", not necessarily small pages:
>
> anon_fault_fallback
> is incremented if a page fault fails to allocate or charge
> a huge page and instead falls back to using huge pages with
> lower orders or small pages.
>
> anon_fault_fallback_charge
> is incremented if a page fault fails to charge a huge page and
> instead falls back to using huge pages with lower orders or
> small pages even though the allocation was successful.
Right, I clearly overlooked that ;)
Thanks,
Lance
>
> >
> > Thanks,
> > Lance
> >
> > > +swpin_fallback
> > > + is incremented if a huge page swapin fails to allocate or charge
> > > + a huge page and instead falls back to using huge pages with
> > > + lower orders or small pages.
> > > +
> > > +swpin_fallback_charge
> > > + is incremented if a page swapin fails to charge a huge page and
> > > + instead falls back to using huge pages with lower orders or
> > > + small pages even though the allocation was successful.
> > > +
> > > swpout
> > > is incremented every time a huge page is swapped out to a non-zswap
> > > swap device in one piece without splitting.
> > > diff --git a/include/linux/huge_mm.h b/include/linux/huge_mm.h
> > > index b94c2e8ee918..93e509b6c00e 100644
> > > --- a/include/linux/huge_mm.h
> > > +++ b/include/linux/huge_mm.h
> > > @@ -121,6 +121,8 @@ enum mthp_stat_item {
> > > MTHP_STAT_ANON_FAULT_FALLBACK_CHARGE,
> > > MTHP_STAT_ZSWPOUT,
> > > MTHP_STAT_SWPIN,
> > > + MTHP_STAT_SWPIN_FALLBACK,
> > > + MTHP_STAT_SWPIN_FALLBACK_CHARGE,
> > > MTHP_STAT_SWPOUT,
> > > MTHP_STAT_SWPOUT_FALLBACK,
> > > MTHP_STAT_SHMEM_ALLOC,
> > > diff --git a/mm/huge_memory.c b/mm/huge_memory.c
> > > index ee335d96fc39..46749dded1c9 100644
> > > --- a/mm/huge_memory.c
> > > +++ b/mm/huge_memory.c
> > > @@ -617,6 +617,8 @@ DEFINE_MTHP_STAT_ATTR(anon_fault_fallback, MTHP_STAT_ANON_FAULT_FALLBACK);
> > > DEFINE_MTHP_STAT_ATTR(anon_fault_fallback_charge, MTHP_STAT_ANON_FAULT_FALLBACK_CHARGE);
> > > DEFINE_MTHP_STAT_ATTR(zswpout, MTHP_STAT_ZSWPOUT);
> > > DEFINE_MTHP_STAT_ATTR(swpin, MTHP_STAT_SWPIN);
> > > +DEFINE_MTHP_STAT_ATTR(swpin_fallback, MTHP_STAT_SWPIN_FALLBACK);
> > > +DEFINE_MTHP_STAT_ATTR(swpin_fallback_charge, MTHP_STAT_SWPIN_FALLBACK_CHARGE);
> > > DEFINE_MTHP_STAT_ATTR(swpout, MTHP_STAT_SWPOUT);
> > > DEFINE_MTHP_STAT_ATTR(swpout_fallback, MTHP_STAT_SWPOUT_FALLBACK);
> > > #ifdef CONFIG_SHMEM
> > > @@ -637,6 +639,8 @@ static struct attribute *anon_stats_attrs[] = {
> > > #ifndef CONFIG_SHMEM
> > > &zswpout_attr.attr,
> > > &swpin_attr.attr,
> > > + &swpin_fallback_attr.attr,
> > > + &swpin_fallback_charge_attr.attr,
> > > &swpout_attr.attr,
> > > &swpout_fallback_attr.attr,
> > > #endif
> > > @@ -669,6 +673,8 @@ static struct attribute *any_stats_attrs[] = {
> > > #ifdef CONFIG_SHMEM
> > > &zswpout_attr.attr,
> > > &swpin_attr.attr,
> > > + &swpin_fallback_attr.attr,
> > > + &swpin_fallback_charge_attr.attr,
> > > &swpout_attr.attr,
> > > &swpout_fallback_attr.attr,
> > > #endif
> > > diff --git a/mm/memory.c b/mm/memory.c
> > > index 209885a4134f..774dfd309cfe 100644
> > > --- a/mm/memory.c
> > > +++ b/mm/memory.c
> > > @@ -4189,8 +4189,10 @@ static struct folio *alloc_swap_folio(struct vm_fault *vmf)
> > > if (!mem_cgroup_swapin_charge_folio(folio, vma->vm_mm,
> > > gfp, entry))
> > > return folio;
> > > + count_mthp_stat(order, MTHP_STAT_SWPIN_FALLBACK_CHARGE);
> > > folio_put(folio);
> > > }
> > > + count_mthp_stat(order, MTHP_STAT_SWPIN_FALLBACK);
> > > order = next_order(&orders, order);
> > > }
> > >
> > > --
> > > 2.45.0
> > >
>
> Thanks
> Barry
Powered by blists - more mailing lists