[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20241124-asus_qcom_display-v3-2-002b723b1920@hotmail.com>
Date: Sun, 24 Nov 2024 11:00:58 +0100
From: Maud Spierings via B4 Relay <devnull+maud_spierings.hotmail.com@...nel.org>
To: Neil Armstrong <neil.armstrong@...aro.org>,
Jessica Zhang <quic_jesszhan@...cinc.com>,
Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
Maxime Ripard <mripard@...nel.org>, Thomas Zimmermann <tzimmermann@...e.de>,
David Airlie <airlied@...il.com>, Simona Vetter <simona@...ll.ch>,
Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Douglas Anderson <dianders@...omium.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>
Cc: dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
Maud Spierings <maud_spierings@...mail.com>
Subject: [PATCH v3 2/4] arm64: dts: qcom: x1e80100-vivobook-s15: Use the
samsung,atna33xc20 panel driver
From: Maud Spierings <maud_spierings@...mail.com>
The Asus vivobook s15 uses the ATNA56AC03 panel.
This panel is controlled by the atna33xc20 driver instead of the generic
edp-panel driver
Signed-off-by: Maud Spierings <maud_spierings@...mail.com>
---
arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts | 16 +++++++++++++++-
1 file changed, 15 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts b/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
index f25991b887de3fca0092c5f81c881c5d8bd71aac..dbc85aff50a95bfc2ac11528d1901979ec7b1501 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
@@ -407,9 +407,13 @@ &mdss_dp3 {
aux-bus {
panel {
- compatible = "edp-panel";
+ compatible = "samsung,atna56ac03", "samsung,atna33xc20";
+ enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
power-supply = <&vreg_edp_3p3>;
+ pinctrl-0 = <&edp_bl_en>;
+ pinctrl-names = "default";
+
port {
edp_panel_in: endpoint {
remote-endpoint = <&mdss_dp3_out>;
@@ -475,6 +479,16 @@ &pcie6a_phy {
status = "okay";
};
+&pmc8380_3_gpios {
+ edp_bl_en: edp-bl-en-state {
+ pins = "gpio4";
+ function = "normal";
+ power-source = <0>;
+ input-disable;
+ output-enable;
+ };
+};
+
&qupv3_0 {
status = "okay";
};
--
2.47.0
Powered by blists - more mailing lists