[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID:
<VE1P189MB10249A3A525D8282E35D18F2E32E2@VE1P189MB1024.EURP189.PROD.OUTLOOK.COM>
Date: Mon, 25 Nov 2024 18:43:32 +0100
From: Maud Spierings <maud_spierings@...mail.com>
To: Konrad Dybcio <konrad.dybcio@....qualcomm.com>,
Neil Armstrong <neil.armstrong@...aro.org>,
Jessica Zhang <quic_jesszhan@...cinc.com>,
Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
Maxime Ripard <mripard@...nel.org>, Thomas Zimmermann <tzimmermann@...e.de>,
David Airlie <airlied@...il.com>, Simona Vetter <simona@...ll.ch>,
Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Douglas Anderson
<dianders@...omium.org>, Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>
Cc: dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org
Subject: Re: [PATCH v3 2/4] arm64: dts: qcom: x1e80100-vivobook-s15: Use the
samsung,atna33xc20 panel driver
On 11/25/24 1:21 PM, Konrad Dybcio wrote:
> On 24.11.2024 11:00 AM, Maud Spierings via B4 Relay wrote:
>> From: Maud Spierings <maud_spierings@...mail.com>
>>
>> The Asus vivobook s15 uses the ATNA56AC03 panel.
>> This panel is controlled by the atna33xc20 driver instead of the generic
>> edp-panel driver
>>
>> Signed-off-by: Maud Spierings <maud_spierings@...mail.com>
>> ---
>> arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts | 16 +++++++++++++++-
>> 1 file changed, 15 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts b/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
>> index f25991b887de3fca0092c5f81c881c5d8bd71aac..dbc85aff50a95bfc2ac11528d1901979ec7b1501 100644
>> --- a/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
>> +++ b/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
>> @@ -407,9 +407,13 @@ &mdss_dp3 {
>>
>> aux-bus {
>> panel {
>> - compatible = "edp-panel";
>> + compatible = "samsung,atna56ac03", "samsung,atna33xc20";
>> + enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
>> power-supply = <&vreg_edp_3p3>;
>>
>> + pinctrl-0 = <&edp_bl_en>;
>> + pinctrl-names = "default";
>> +
>> port {
>> edp_panel_in: endpoint {
>> remote-endpoint = <&mdss_dp3_out>;
>> @@ -475,6 +479,16 @@ &pcie6a_phy {
>> status = "okay";
>> };
>>
>> +&pmc8380_3_gpios {
>> + edp_bl_en: edp-bl-en-state {
>> + pins = "gpio4";
>> + function = "normal";
>> + power-source = <0>;
> This is <1> on other boards.. I'm guessing you verified this against
> at-boot values?
>
> Konrad
I checked all the other gpios in these patches but it seems I did not do
the same for this one. It is indeed supposed to be <1>, I wonder if the
lenovo slim 7 dts is wrong too then.
Anyways, I will fix this, with a couple of other parameters that have to
be added as well.
Terribly sorry for the lack of checking and thank you for spotting this.
Kind regards, Maud
Powered by blists - more mailing lists