linux-kernel - [PATCH v3 net 2/2] net: enetc: Do not configure preemptible TCs if SIs do not support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20241125090719.2159124-3-wei.fang@nxp.com>
Date: Mon, 25 Nov 2024 17:07:19 +0800
From: Wei Fang <wei.fang@....com>
To: claudiu.manoil@....com,
	vladimir.oltean@....com,
	xiaoning.wang@....com,
	andrew+netdev@...n.ch,
	davem@...emloft.net,
	edumazet@...gle.com,
	kuba@...nel.org,
	pabeni@...hat.com
Cc: netdev@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	imx@...ts.linux.dev
Subject: [PATCH v3 net 2/2] net: enetc: Do not configure preemptible TCs if SIs do not support

Both ENETC PF and VF drivers share enetc_setup_tc_mqprio() to configure
MQPRIO. And enetc_setup_tc_mqprio() calls enetc_change_preemptible_tcs()
to configure preemptible TCs. However, only PF is able to configure
preemptible TCs. Because only PF has related registers, while VF does not
have these registers. So for VF, its hw->port pointer is NULL. Therefore,
VF will access an invalid pointer when accessing a non-existent register,
which will cause a crash issue. The simplified log is as follows.

root@...028ardb:~# tc qdisc add dev eno0vf0 parent root handle 100: \
mqprio num_tc 4 map 0 0 1 1 2 2 3 3 queues 1@0 1@1 1@2 1@3 hw 1
[  187.290775] Unable to handle kernel paging request at virtual address 0000000000001f00
[  187.424831] pc : enetc_mm_commit_preemptible_tcs+0x1c4/0x400
[  187.430518] lr : enetc_mm_commit_preemptible_tcs+0x30c/0x400
[  187.511140] Call trace:
[  187.513588]  enetc_mm_commit_preemptible_tcs+0x1c4/0x400
[  187.518918]  enetc_setup_tc_mqprio+0x180/0x214
[  187.523374]  enetc_vf_setup_tc+0x1c/0x30
[  187.527306]  mqprio_enable_offload+0x144/0x178
[  187.531766]  mqprio_init+0x3ec/0x668
[  187.535351]  qdisc_create+0x15c/0x488
[  187.539023]  tc_modify_qdisc+0x398/0x73c
[  187.542958]  rtnetlink_rcv_msg+0x128/0x378
[  187.547064]  netlink_rcv_skb+0x60/0x130
[  187.550910]  rtnetlink_rcv+0x18/0x24
[  187.554492]  netlink_unicast+0x300/0x36c
[  187.558425]  netlink_sendmsg+0x1a8/0x420
[  187.606759] ---[ end trace 0000000000000000 ]---

In addition, some PFs also do not support configuring preemptible TCs,
such as eno1 and eno3 on LS1028A. It won't crash like it does for VFs,
but we should prevent these PFs from accessing these unimplemented
registers.

Fixes: 827145392a4a ("net: enetc: only commit preemptible TCs to hardware when MM TX is active")
Signed-off-by: Wei Fang <wei.fang@....com>
Suggested-by: Vladimir Oltean <vladimir.oltean@....com>
---
v2 changes:
1. Change the title and refine the commit message
2. Only set ENETC_SI_F_QBU bit for PFs which support Qbu
3. Prevent all SIs which not support Qbu from configuring preemptible
TCs
v3 changes:
1. remove the changes in enetc_get_si_caps().
---
 drivers/net/ethernet/freescale/enetc/enetc.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/net/ethernet/freescale/enetc/enetc.c b/drivers/net/ethernet/freescale/enetc/enetc.c
index bece220535a1..535969fa0fdb 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc.c
@@ -29,6 +29,9 @@ EXPORT_SYMBOL_GPL(enetc_port_mac_wr);
 static void enetc_change_preemptible_tcs(struct enetc_ndev_priv *priv,
 					 u8 preemptible_tcs)
 {
+	if (!(priv->si->hw_features & ENETC_SI_F_QBU))
+		return;
+
 	priv->preemptible_tcs = preemptible_tcs;
 	enetc_mm_commit_preemptible_tcs(priv);
 }
-- 
2.34.1