lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20241125105747.6595-2-quic_mukhopad@quicinc.com>
Date: Mon, 25 Nov 2024 16:27:46 +0530
From: Soutrik Mukhopadhyay <quic_mukhopad@...cinc.com>
To: andersson@...nel.org, konradybcio@...nel.org, robh@...nel.org,
        krzk+dt@...nel.org, conor+dt@...nel.org
Cc: Soutrik Mukhopadhyay <quic_mukhopad@...cinc.com>,
        linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, quic_riteshk@...cinc.com,
        quic_vproddut@...cinc.com, quic_abhinavk@...cinc.com
Subject: [PATCH v6 1/2] arm64: dts: qcom: sa8775p: add DisplayPort device nodes

Add device tree nodes for the DPTX0 and DPTX1 controllers
with their corresponding PHYs found on Qualcomm SA8775P SoC.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
Signed-off-by: Soutrik Mukhopadhyay <quic_mukhopad@...cinc.com>
---
 arch/arm64/boot/dts/qcom/sa8775p.dtsi | 220 +++++++++++++++++++++++++-
 1 file changed, 219 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
index f7a9d1684a79..47831c0c30a7 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
@@ -3343,6 +3343,27 @@
 				interrupt-parent = <&mdss0>;
 				interrupts = <0>;
 
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						dpu_intf0_out: endpoint {
+							remote-endpoint = <&mdss0_dp0_in>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						dpu_intf4_out: endpoint {
+							remote-endpoint = <&mdss0_dp1_in>;
+						};
+					};
+				};
+
 				mdss0_mdp_opp_table: opp-table {
 					compatible = "operating-points-v2";
 
@@ -3367,6 +3388,202 @@
 					};
 				};
 			};
+
+			mdss0_dp0_phy: phy@...2a00 {
+				compatible = "qcom,sa8775p-edp-phy";
+
+				reg = <0x0 0x0aec2a00 0x0 0x200>,
+				      <0x0 0x0aec2200 0x0 0xd0>,
+				      <0x0 0x0aec2600 0x0 0xd0>,
+				      <0x0 0x0aec2000 0x0 0x1c8>;
+
+				clocks = <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_AUX_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>;
+				clock-names = "aux",
+					      "cfg_ahb";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				status = "disabled";
+			};
+
+			mdss0_dp1_phy: phy@...5a00 {
+				compatible = "qcom,sa8775p-edp-phy";
+
+				reg = <0x0 0x0aec5a00 0x0 0x200>,
+				      <0x0 0x0aec5200 0x0 0xd0>,
+				      <0x0 0x0aec5600 0x0 0xd0>,
+				      <0x0 0x0aec5000 0x0 0x1c8>;
+
+				clocks = <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_AUX_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>;
+				clock-names = "aux",
+					      "cfg_ahb";
+
+				#clock-cells = <1>;
+				#phy-cells = <0>;
+
+				status = "disabled";
+			};
+
+			mdss0_dp0: displayport-controller@...4000 {
+				compatible = "qcom,sa8775p-dp";
+
+				reg = <0x0 0x0af54000 0x0 0x104>,
+				      <0x0 0x0af54200 0x0 0x0c0>,
+				      <0x0 0x0af55000 0x0 0x770>,
+				      <0x0 0x0af56000 0x0 0x09c>,
+				      <0x0 0x0af57000 0x0 0x09c>;
+
+				interrupt-parent = <&mdss0>;
+				interrupts = <12>;
+
+				clocks = <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_AUX_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_LINK_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
+				clock-names = "core_iface",
+					      "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface",
+					      "stream_pixel";
+				assigned-clocks = <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
+						  <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
+				assigned-clock-parents = <&mdss0_dp0_phy 0>, <&mdss0_dp0_phy 1>;
+				phys = <&mdss0_dp0_phy>;
+				phy-names = "dp";
+
+				operating-points-v2 = <&dp_opp_table>;
+				power-domains = <&rpmhpd SA8775P_MMCX>;
+
+				#sound-dai-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss0_dp0_in: endpoint {
+							remote-endpoint = <&dpu_intf0_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss0_dp0_out: endpoint { };
+					};
+				};
+
+				dp_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
+
+			mdss0_dp1: displayport-controller@...c000 {
+				compatible = "qcom,sa8775p-dp";
+
+				reg = <0x0 0x0af5c000 0x0 0x104>,
+				      <0x0 0x0af5c200 0x0 0x0c0>,
+				      <0x0 0x0af5d000 0x0 0x770>,
+				      <0x0 0x0af5e000 0x0 0x09c>,
+				      <0x0 0x0af5f000 0x0 0x09c>;
+
+				interrupt-parent = <&mdss0>;
+				interrupts = <13>;
+
+				clocks = <&dispcc0 MDSS_DISP_CC_MDSS_AHB_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_AUX_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_LINK_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_LINK_INTF_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_PIXEL0_CLK>;
+				clock-names = "core_iface",
+					      "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface",
+					      "stream_pixel";
+				assigned-clocks = <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_LINK_CLK_SRC>,
+						  <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>;
+				assigned-clock-parents = <&mdss0_dp1_phy 0>, <&mdss0_dp1_phy 1>;
+				phys = <&mdss0_dp1_phy>;
+				phy-names = "dp";
+
+				operating-points-v2 = <&dp1_opp_table>;
+				power-domains = <&rpmhpd SA8775P_MMCX>;
+
+				#sound-dai-cells = <0>;
+
+				status = "disabled";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						mdss0_dp1_in: endpoint {
+							remote-endpoint = <&dpu_intf4_out>;
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss0_dp1_out: endpoint { };
+					};
+				};
+
+				dp1_opp_table: opp-table {
+					compatible = "operating-points-v2";
+
+					opp-160000000 {
+						opp-hz = /bits/ 64 <160000000>;
+						required-opps = <&rpmhpd_opp_low_svs>;
+					};
+
+					opp-270000000 {
+						opp-hz = /bits/ 64 <270000000>;
+						required-opps = <&rpmhpd_opp_svs>;
+					};
+
+					opp-540000000 {
+						opp-hz = /bits/ 64 <540000000>;
+						required-opps = <&rpmhpd_opp_svs_l1>;
+					};
+
+					opp-810000000 {
+						opp-hz = /bits/ 64 <810000000>;
+						required-opps = <&rpmhpd_opp_nom>;
+					};
+				};
+			};
 		};
 
 		dispcc0: clock-controller@...0000 {
@@ -3376,7 +3593,8 @@
 				 <&rpmhcc RPMH_CXO_CLK>,
 				 <&rpmhcc RPMH_CXO_CLK_A>,
 				 <&sleep_clk>,
-				 <0>, <0>, <0>, <0>,
+				 <&mdss0_dp0_phy 0>, <&mdss0_dp0_phy 1>,
+				 <&mdss0_dp1_phy 0>, <&mdss0_dp1_phy 1>,
 				 <0>, <0>, <0>, <0>;
 			power-domains = <&rpmhpd SA8775P_MMCX>;
 			#clock-cells = <1>;
-- 
2.17.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ