linux-kernel - [PATCH] i2c: imx: support DMA defer probing

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20241125135243.1612098-1-carlos.song@nxp.com>
Date: Mon, 25 Nov 2024 21:52:43 +0800
From: carlos.song@....com
To: o.rempel@...gutronix.de,
	kernel@...gutronix.de,
	andi.shyti@...nel.org,
	shawnguo@...nel.org,
	s.hauer@...gutronix.de,
	festevam@...il.com,
	frank.li@....com
Cc: linux-i2c@...r.kernel.org,
	imx@...ts.linux.dev,
	linux-arm-kernel@...ts.infradead.org,
	linux-kernel@...r.kernel.org
Subject: [PATCH] i2c: imx: support DMA defer probing

From: Carlos Song <carlos.song@....com>

Return -EPROBE_DEFER when dma_request_slave_channel() because
DMA driver have not ready yet.

Move i2c_imx_dma_request() before registering I2C adapter to avoid
infinite loop of .probe() calls to the same driver, see "e8c220fac415
Revert "i2c: imx: improve the error handling in i2c_imx_dma_request()""
and "Documentation/driver-api/driver-model/driver.rst".

Use CPU mode to avoid stuck registering i2c adapter when DMA resources
are unavailable.

Signed-off-by: Carlos Song <carlos.song@....com>
Signed-off-by: Clark Wang <xiaoning.wang@....com>
---
 drivers/i2c/busses/i2c-imx.c | 21 +++++++++++++--------
 1 file changed, 13 insertions(+), 8 deletions(-)

diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 5ed4cb61e262..ee7070ee9e6e 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -397,17 +397,16 @@ static void i2c_imx_reset_regs(struct imx_i2c_struct *i2c_imx)
 }
 
 /* Functions for DMA support */
-static void i2c_imx_dma_request(struct imx_i2c_struct *i2c_imx,
-						dma_addr_t phy_addr)
+static int i2c_imx_dma_request(struct device *dev, dma_addr_t phy_addr)
 {
+	struct imx_i2c_struct *i2c_imx = dev_get_drvdata(dev);
 	struct imx_i2c_dma *dma;
 	struct dma_slave_config dma_sconfig;
-	struct device *dev = &i2c_imx->adapter.dev;
 	int ret;
 
 	dma = devm_kzalloc(dev, sizeof(*dma), GFP_KERNEL);
 	if (!dma)
-		return;
+		return -ENOMEM;
 
 	dma->chan_tx = dma_request_chan(dev, "tx");
 	if (IS_ERR(dma->chan_tx)) {
@@ -452,7 +451,7 @@ static void i2c_imx_dma_request(struct imx_i2c_struct *i2c_imx,
 	dev_info(dev, "using %s (tx) and %s (rx) for DMA transfers\n",
 		dma_chan_name(dma->chan_tx), dma_chan_name(dma->chan_rx));
 
-	return;
+	return 0;
 
 fail_rx:
 	dma_release_channel(dma->chan_rx);
@@ -460,6 +459,8 @@ static void i2c_imx_dma_request(struct imx_i2c_struct *i2c_imx,
 	dma_release_channel(dma->chan_tx);
 fail_al:
 	devm_kfree(dev, dma);
+
+	return ret;
 }
 
 static void i2c_imx_dma_callback(void *arg)
@@ -1803,6 +1804,13 @@ static int i2c_imx_probe(struct platform_device *pdev)
 	if (ret == -EPROBE_DEFER)
 		goto clk_notifier_unregister;
 
+	/* Init DMA config if supported */
+	ret = i2c_imx_dma_request(&pdev->dev, phy_addr);
+	if (ret == -EPROBE_DEFER) {
+		dev_err(&pdev->dev, "DMA not ready, go defer probe!\n");
+		goto clk_notifier_unregister;
+	}
+
 	/* Add I2C adapter */
 	ret = i2c_add_numbered_adapter(&i2c_imx->adapter);
 	if (ret < 0)
@@ -1817,9 +1825,6 @@ static int i2c_imx_probe(struct platform_device *pdev)
 		i2c_imx->adapter.name);
 	dev_info(&i2c_imx->adapter.dev, "IMX I2C adapter registered\n");
 
-	/* Init DMA config if supported */
-	i2c_imx_dma_request(i2c_imx, phy_addr);
-
 	return 0;   /* Return OK */
 
 clk_notifier_unregister:
-- 
2.34.1