lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20241125-imx219_fixes-v3-2-434fc0b541c8@ideasonboard.com>
Date: Mon, 25 Nov 2024 20:36:26 +0530
From: Jai Luthra <jai.luthra@...asonboard.com>
To: Dave Stevenson <dave.stevenson@...pberrypi.com>, 
 Sakari Ailus <sakari.ailus@...ux.intel.com>, 
 Mauro Carvalho Chehab <mchehab@...nel.org>
Cc: linux-media@...r.kernel.org, linux-kernel@...r.kernel.org, 
 Jacopo Mondi <jacopo.mondi@...asonboard.com>, 
 Laurent Pinchart <laurent.pinchart@...asonboard.com>, 
 Jai Luthra <jai.luthra@...asonboard.com>
Subject: [PATCH v3 2/3] media: i2c: imx219: make HBLANK r/w to allow longer
 exposures

From: Dave Stevenson <dave.stevenson@...pberrypi.com>

The HBLANK control was read-only, and always configured such
that the sensor HTS register was 3448. This limited the maximum
exposure time that could be achieved to around 1.26 secs.

Make HBLANK read/write so that the line time can be extended,
and thereby allow longer exposures (and slower frame rates).
Retain the overall HTS setting when changing modes rather than
resetting it to a default.

Signed-off-by: Dave Stevenson <dave.stevenson@...pberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@...asonboard.com>
Signed-off-by: Jai Luthra <jai.luthra@...asonboard.com>
---
 drivers/media/i2c/imx219.c | 37 ++++++++++++++++++++++++-------------
 1 file changed, 24 insertions(+), 13 deletions(-)

diff --git a/drivers/media/i2c/imx219.c b/drivers/media/i2c/imx219.c
index f98aad74fe584a18e2fe7126f92bf294762a54e3..970e6362d0ae3a9078daf337155e83d637bc1ca1 100644
--- a/drivers/media/i2c/imx219.c
+++ b/drivers/media/i2c/imx219.c
@@ -76,8 +76,10 @@
 
 #define IMX219_VBLANK_MIN		32
 
-/* HBLANK control - read only */
-#define IMX219_PPL_DEFAULT		3448
+/* HBLANK control range */
+#define IMX219_PPL_MIN			0x0d78
+#define IMX219_PPL_MAX			0x7ff0
+#define IMX219_REG_HTS			CCI_REG16(0x0162)
 
 #define IMX219_REG_LINE_LENGTH_A	CCI_REG16(0x0162)
 #define IMX219_REG_X_ADD_STA_A		CCI_REG16(0x0164)
@@ -422,6 +424,10 @@ static int imx219_set_ctrl(struct v4l2_ctrl *ctrl)
 		cci_write(imx219->regmap, IMX219_REG_VTS,
 			  format->height + ctrl->val, &ret);
 		break;
+	case V4L2_CID_HBLANK:
+		cci_write(imx219->regmap, IMX219_REG_HTS,
+			  format->width + ctrl->val, &ret);
+		break;
 	case V4L2_CID_TEST_PATTERN_RED:
 		cci_write(imx219->regmap, IMX219_REG_TESTP_RED,
 			  ctrl->val, &ret);
@@ -496,12 +502,10 @@ static int imx219_init_controls(struct imx219 *imx219)
 					   V4L2_CID_VBLANK, IMX219_VBLANK_MIN,
 					   IMX219_VTS_MAX - mode->height, 1,
 					   mode->vts_def - mode->height);
-	hblank = IMX219_PPL_DEFAULT - mode->width;
+	hblank = IMX219_PPL_MIN - mode->width;
 	imx219->hblank = v4l2_ctrl_new_std(ctrl_hdlr, &imx219_ctrl_ops,
 					   V4L2_CID_HBLANK, hblank, hblank,
 					   1, hblank);
-	if (imx219->hblank)
-		imx219->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
 	exposure_max = mode->vts_def - 4;
 	exposure_def = (exposure_max < IMX219_EXPOSURE_DEFAULT) ?
 		exposure_max : IMX219_EXPOSURE_DEFAULT;
@@ -817,6 +821,10 @@ static int imx219_set_pad_format(struct v4l2_subdev *sd,
 	struct v4l2_mbus_framefmt *format;
 	struct v4l2_rect *crop;
 	unsigned int bin_h, bin_v;
+	u32 prev_hts;
+
+	format = v4l2_subdev_state_get_format(state, 0);
+	prev_hts = format->width + imx219->hblank->val;
 
 	mode = v4l2_find_nearest_size(supported_modes,
 				      ARRAY_SIZE(supported_modes),
@@ -824,8 +832,6 @@ static int imx219_set_pad_format(struct v4l2_subdev *sd,
 				      fmt->format.width, fmt->format.height);
 
 	imx219_update_pad_format(imx219, mode, &fmt->format, fmt->format.code);
-
-	format = v4l2_subdev_state_get_format(state, 0);
 	*format = fmt->format;
 
 	/*
@@ -861,13 +867,18 @@ static int imx219_set_pad_format(struct v4l2_subdev *sd,
 					 exposure_max, imx219->exposure->step,
 					 exposure_def);
 		/*
-		 * Currently PPL is fixed to IMX219_PPL_DEFAULT, so hblank
-		 * depends on mode->width only, and is not changeble in any
-		 * way other than changing the mode.
+		 * Retain PPL setting from previous mode so that the
+		 * line time does not change on a mode change.
+		 * Limits have to be recomputed as the controls define
+		 * the blanking only, so PPL values need to have the
+		 * mode width subtracted.
 		 */
-		hblank = IMX219_PPL_DEFAULT - mode->width;
-		__v4l2_ctrl_modify_range(imx219->hblank, hblank, hblank, 1,
-					 hblank);
+		hblank = prev_hts - mode->width;
+		__v4l2_ctrl_modify_range(imx219->hblank,
+					 IMX219_PPL_MIN - mode->width,
+					 IMX219_PPL_MAX - mode->width,
+					 1, IMX219_PPL_MIN - mode->width);
+		__v4l2_ctrl_s_ctrl(imx219->hblank, hblank);
 	}
 
 	return 0;

-- 
2.47.0


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ