[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20241126092050.1825607-1-claudiu.beznea.uj@bp.renesas.com>
Date: Tue, 26 Nov 2024 11:20:35 +0200
From: Claudiu <claudiu.beznea@...on.dev>
To: vkoul@...nel.org,
kishon@...nel.org,
robh@...nel.org,
krzk+dt@...nel.org,
conor+dt@...nel.org,
p.zabel@...gutronix.de,
geert+renesas@...der.be,
magnus.damm@...il.com,
gregkh@...uxfoundation.org,
yoshihiro.shimoda.uh@...esas.com,
christophe.jaillet@...adoo.fr
Cc: linux-phy@...ts.infradead.org,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
linux-renesas-soc@...r.kernel.org,
linux-usb@...r.kernel.org,
claudiu.beznea@...on.dev,
Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
Subject: [PATCH v2 00/15] Add initial USB support for the Renesas RZ/G3S SoC
From: Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
Hi,
Series adds initial USB support for the Renesas RZ/G3S SoC.
Series is split as follows:
- patches 01-05/15 - add SYSC driver support; this is necessary for USB
PHY as the USB PHY driver need to touch a register in
the SYSC address space, in the initialization phase
- patch 06/15 - updates the USBHS documentation for RZ/G3S
- patches 07-10/15 - updates the USB PHY support to handle the SYSC
USB PWRRDY signal. Along with it a fix for the
DT bindings and one for the PHY driver were
added; fixes are RZ/G3S USB related
- patch 11/15 - document the USB PHY Ctrl support
- patches 12-15/15 - add device tree support
Merge strategy, if any:
- patches 01-05/15,12-14/15 can go through Renesas tree
- patch 06/14 can go though USB tree
- patches 07-10/14 can go through PHY tree
- patch 11/15 can go though reset controller tree
Thank you,
Claudiu Beznea
Changes in v2:
- dropped v1 patches already applied
- added fixes patches (07/14 and 09/14)
- dropped the approach of handling the USB PWRRDY though a reset controller
driver and introduced the signal concept for the SYSC driver; because
of this, most of the work done in v1 was dropped
- per patch changes are listed in individual patches, if any
Christophe JAILLET (1):
phy: renesas: rcar-gen3-usb2: Fix an error handling path in
rcar_gen3_phy_usb2_probe()
Claudiu Beznea (14):
dt-bindings: soc: renesas: renesas,rzg2l-sysc: Add
#renesas,sysc-signal-cells
soc: renesas: Add SYSC driver for Renesas RZ family
soc: renesas: rz-sysc: Enable SYSC driver for RZ/G3S
soc: renesas: rz-sysc: Add SoC detection support
soc: renesas: rz-sysc: Move RZ/G3S SoC detection to the SYSC driver
dt-bindings: usb: renesas,usbhs: Document RZ/G3S SoC
dt-bindings: phy: renesas,usb2-phy: Mark resets as required for RZ/G3S
dt-bindings: phy: renesas,usb2-phy: Add renesas,sysc-signal
phy: renesas: rcar-gen3-usb2: Add support for PWRRDY
dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G3S support
arm64: dts: renesas: Add #renesas,sysc-signal-cells to system
controller node
arm64: dts: renesas: r9a08g045: Enable the system controller
arm64: dts: renesas: r9a08g045: Add USB support
arm64: dts: renesas: rzg3s-smarc: Enable USB support
.../bindings/phy/renesas,usb2-phy.yaml | 26 +-
.../reset/renesas,rzg2l-usbphy-ctrl.yaml | 1 +
.../soc/renesas/renesas,rzg2l-sysc.yaml | 23 +-
.../bindings/usb/renesas,usbhs.yaml | 2 +
arch/arm64/boot/dts/renesas/r9a07g043.dtsi | 3 +-
arch/arm64/boot/dts/renesas/r9a07g044.dtsi | 3 +-
arch/arm64/boot/dts/renesas/r9a07g054.dtsi | 3 +-
arch/arm64/boot/dts/renesas/r9a08g045.dtsi | 123 +++++-
arch/arm64/boot/dts/renesas/rzg3s-smarc.dtsi | 57 +++
drivers/phy/renesas/phy-rcar-gen3-usb2.c | 77 +++-
drivers/soc/renesas/Kconfig | 8 +
drivers/soc/renesas/Makefile | 2 +
drivers/soc/renesas/r9a08g045-sysc.c | 43 +++
drivers/soc/renesas/renesas-soc.c | 12 -
drivers/soc/renesas/rz-sysc.c | 350 ++++++++++++++++++
drivers/soc/renesas/rz-sysc.h | 70 ++++
16 files changed, 778 insertions(+), 25 deletions(-)
create mode 100644 drivers/soc/renesas/r9a08g045-sysc.c
create mode 100644 drivers/soc/renesas/rz-sysc.c
create mode 100644 drivers/soc/renesas/rz-sysc.h
--
2.39.2
Powered by blists - more mailing lists