linux-kernel - Re: [PATCH v1 1/4] hwmon: (acpi_power_meter) Fix using uninitialized variables

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <b801388b-6bc7-5e96-dd29-e68ed8c970df@huawei.com>
Date: Tue, 26 Nov 2024 09:56:34 +0800
From: "lihuisong (C)" <lihuisong@...wei.com>
To: Guenter Roeck <linux@...ck-us.net>, <linux-hwmon@...r.kernel.org>,
	<linux-kernel@...r.kernel.org>
CC: <jdelvare@...e.com>, <liuyonglong@...wei.com>, <zhanjie9@...ilicon.com>,
	<zhenglifeng1@...wei.com>
Subject: Re: [PATCH v1 1/4] hwmon: (acpi_power_meter) Fix using uninitialized
 variables

Hi Guente,

Thanks for your timely review.

在 2024/11/26 0:03, Guenter Roeck 写道:
> On 11/25/24 01:34, Huisong Li wrote:
>> The 'power1_alarm' attribute uses the 'power' and 'cap' in the
>> acpi_power_meter_resource structure. However, these two fields are just
>> updated when user query 'power' and 'cap' attribute, or hardware 
>> enforced
>> limit. If user directly query the 'power1_alarm' attribute without 
>> queryng
>> above two attributes, driver will use the uninitialized variables to 
>> judge.
>> In addition, the 'power1_alarm' attribute needs to update power and 
>> cap to
>> show the real state.
>>
>> Signed-off-by: Huisong Li <lihuisong@...wei.com>
>> ---
>>   drivers/hwmon/acpi_power_meter.c | 10 ++++++++++
>>   1 file changed, 10 insertions(+)
>>
>> diff --git a/drivers/hwmon/acpi_power_meter.c 
>> b/drivers/hwmon/acpi_power_meter.c
>> index 2f1c9d97ad21..4c3314e35d30 100644
>> --- a/drivers/hwmon/acpi_power_meter.c
>> +++ b/drivers/hwmon/acpi_power_meter.c
>> @@ -396,6 +396,9 @@ static ssize_t show_val(struct device *dev,
>>       struct acpi_device *acpi_dev = to_acpi_device(dev);
>>       struct acpi_power_meter_resource *resource = 
>> acpi_dev->driver_data;
>>       u64 val = 0;
>> +    int ret;
>> +
>> +    guard(mutex)(&resource->lock);
>>         switch (attr->index) {
>>       case 0:
>> @@ -423,6 +426,13 @@ static ssize_t show_val(struct device *dev,
>>               val = 0;
>>           break;
>>       case 6:
>> +        ret = update_meter(resource);
>> +        if (ret)
>> +            return ret;
>> +        ret = update_cap(resource);
>> +        if (ret)
>> +            return ret;
>> +
>>           if (resource->power > resource->cap)
>>               val = 1;
>>           else
>
>
> While technically correct, the implementation of this attribute 
> defeats its
> purpose. It is supposed to reflect the current status as reported by the
> hardware. A real fix would be to use the associated notification to 
> set or
> reset a status flag, and to report the current value of that flag as 
> reported
> by the hardware.
I know what you mean.
The Notify(power_meter, 0x83) is supposed to meet your proposal IIUC.
It's good, but it depands on hardware support notification.
>
> If there is no notification support, the attribute should not even exist,
> unless there is a means to retrieve its value from ACPI (the status 
> itself,
> not by comparing temperature values).
Currently, the 'power1_alarm' attribute is created just when platform 
support the power meter meassurement(bit0 of the supported capabilities 
in _PMC).
And it doesn't see if the platform support notifications.
 From the current implementation of this driver, this sysfs can also 
reflect the status by comparing power and cap,
which is good to the platform that support hardware limit from some 
out-of-band mechanism but doesn't support any notification.