[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <48b876665032daf11e33fb97155605883ed5d18c.camel@phytec.de>
Date: Wed, 27 Nov 2024 10:29:22 +0000
From: Teresa Remmet <T.Remmet@...tec.de>
To: "kernel@...gutronix.de" <kernel@...gutronix.de>, Andrej Picej
<andrej.picej@...ik.com>, "s.hauer@...gutronix.de" <s.hauer@...gutronix.de>,
"robh@...nel.org" <robh@...nel.org>, "shawnguo@...nel.org"
<shawnguo@...nel.org>, "krzk+dt@...nel.org" <krzk+dt@...nel.org>,
"festevam@...il.com" <festevam@...il.com>, "conor+dt@...nel.org"
<conor+dt@...nel.org>
CC: "imx@...ts.linux.dev" <imx@...ts.linux.dev>, PHYTEC Upstream
<upstream@...ts.phytec.de>, "linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>, "linux-kernel@...r.kernel.org"
<linux-kernel@...r.kernel.org>, "devicetree@...r.kernel.org"
<devicetree@...r.kernel.org>
Subject: Re: [Upstream] [PATCH 02/15] arm64: dts: imx8mm-phycore-som: Fix
bluetooth wakeup source
Am Montag, dem 25.11.2024 um 09:18 +0100 schrieb Andrej Picej:
> Not using pull-up on the host wake-up line triggers the wake up
> immediately after device enters suspend. Fix this by enabling
> internal
> pull-up and setting interrupt triggering on the falling edge.
>
> Signed-off-by: Andrej Picej <andrej.picej@...ik.com>
Reviewed-by: Teresa Remmet <t.remmet@...tec.de>
> ---
> arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-
> rdk.dts b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts
> index 5eacbd9611ee..31d5c57d3c24 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-rdk.dts
> @@ -255,7 +255,7 @@ bluetooth {
> device-wakeup-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
> interrupt-names = "host-wakeup";
> interrupt-parent = <&gpio2>;
> - interrupts = <9 IRQ_TYPE_EDGE_BOTH>;
> + interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
> max-speed = <2000000>;
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_bt>;
> @@ -332,7 +332,7 @@ pinctrl_bt: btgrp {
> fsl,pins = <
> MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6 0x00
> MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8 0x00
> - MX8MM_IOMUXC_SD1_DATA7_GPIO2_IO9 0x00
> + MX8MM_IOMUXC_SD1_DATA7_GPIO2_IO9 0x140
> >;
> };
>
--
PHYTEC Messtechnik GmbH | Barcelona-Allee 1 | 55129 Mainz, Germany
Geschäftsführer: Dipl.-Ing. Michael Mitezki, Dipl.-Ing. Bodo Huber,
Dipl.-Ing. (FH) Markus Lickes | Handelsregister Mainz HRB 4656 |
Finanzamt Mainz | St.Nr. 26/665/00608, DE 149059855
Powered by blists - more mailing lists