[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <dd060a05-9428-4af8-85b1-b6baa756490f@freeshell.de>
Date: Wed, 27 Nov 2024 05:38:39 -0800
From: E Shattow <e@...eshell.de>
To: Emil Renner Berthing <emil.renner.berthing@...onical.com>,
Henry Bell <dmoo_dv@...tonmail.com>
Cc: Conor Dooley <conor@...nel.org>, Emil Renner Berthing <kernel@...il.dk>,
Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Paul Walmsley <paul.walmsley@...ive.com>, Palmer Dabbelt
<palmer@...belt.com>, Albert Ou <aou@...s.berkeley.edu>,
linux-riscv@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3 1/1] riscv: dts: starfive: jh7110-pine64-star64: enable
usb0 host function
On 11/27/24 05:23, Emil Renner Berthing wrote:
> E Shattow wrote:
>> Pine64 Star64 set JH7110 on-chip USB host mode and vbus pin assignment
> Here I'd like it explained that the Star64 board routes 1 of the 4 USB-A ports
> to USB0 on the SoC rather than to the USB 3.0 <-> PCIe chip.
>
> (Confusing for users that 1 of the 4 similar ports only does USB 2.0, but
> that's too late to change and not relevant here)
>
> With that fixed:
> Reviewed-by: Emil Renner Berthing <emil.renner.berthing@...onical.com>
There is no (VL805) USB 3.0 <-> PCIe chip on Star64; All 4 USB-A ports
route to USB0 of the SoC. What does not exist I did not write about in
the cover letter. I will expand the description in the commit message.
Thank you! -E
>> Signed-off-by: E Shattow <e@...eshell.de>
>> ---
>> .../boot/dts/starfive/jh7110-pine64-star64.dts | 18 +++++++++++++++++-
>> 1 file changed, 17 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts b/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts
>> index fe4a490ecc61..b764d4d92fd9 100644
>> --- a/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts
>> +++ b/arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts
>> @@ -80,7 +80,23 @@ &spi0 {
>> status = "okay";
>> };
>>
>> +&sysgpio {
>> + usb0_pins: usb0-0 {
>> + vbus-pins {
>> + pinmux = <GPIOMUX(25, GPOUT_SYS_USB_DRIVE_VBUS,
>> + GPOEN_ENABLE,
>> + GPI_NONE)>;
>> + bias-disable;
>> + input-disable;
>> + input-schmitt-disable;
>> + slew-rate = <0>;
>> + };
>> + };
>> +};
>> +
>> &usb0 {
>> - dr_mode = "peripheral";
>> + dr_mode = "host";
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&usb0_pins>;
>> status = "okay";
>> };
>> --
>> 2.45.2
>>
Powered by blists - more mailing lists