linux-kernel - Re: drm/fbdev-dma: regression

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <CAEXMXLQw1yqUGbWcrKZdOuGvA4eZMG0utiyQ2PVRvTeuFedGbA@mail.gmail.com>
Date: Thu, 28 Nov 2024 23:37:46 +0000
From: Nuno Gonçalves <nunojpg@...il.com>
To: Thomas Zimmermann <tzimmermann@...e.de>
Cc: Thorsten Leemhuis <regressions@...mhuis.info>, 
	Linux kernel regressions list <regressions@...ts.linux.dev>, dri-devel@...ts.freedesktop.org, 
	LKML <linux-kernel@...r.kernel.org>, 
	Linux Framebuffer <linux-fbdev@...r.kernel.org>
Subject: Re: drm/fbdev-dma: regression

> Here's a first attempt to address this bug. Could you please apply the
> attached patch and report on the results? It should work against the
> upcoming v6.13-rc1 or against a recent drm-misc-next.

Hi. No luck yet.

I collected crashes before the patch:

BUG: Bad page map in process husband  pte:60000001b46fcb pmd:800000002736403
page: refcount:1 mapcount:-1 mapping:000000005cb4182c index:0x6 pfn:0x1b46
aops:0xffff8000807722e0 ino:15 dentry name(?):"fb0"
flags: 0x14(referenced|dirty|zone=0)
raw: 0000000000000014 dead000000000100 dead000000000122 ffff0000018cf348
raw: 0000000000000006 0000000000000000 00000001fffffffe 0000000000000000
page dumped because: bad pte
addr:0000ffff87b4e000 vm_flags:040400fb anon_vma:0000000000000000
mapping:ffff0000018cf348 index:6
file:fb0 fault:fb_deferred_io_fault mmap:fb_mmap read_folio:0x0
CPU: 2 UID: 0 PID: 313 Comm: husband Not tainted 6.12.0 #1
Hardware name: Raspberry Pi Compute Module 3 Rev 1.0 (DT)
Call trace:
 show_stack+0x18/0x30 (C)
 dump_stack_lvl+0x60/0x80
 dump_stack+0x18/0x24
 print_bad_pte+0x174/0x1d0
 unmap_page_range+0x47c/0xc90
 unmap_vmas+0xa4/0x100
 exit_mmap+0xbc/0x2c0
 mmput+0x70/0x190
 do_exit+0x248/0x8f0
 do_group_exit+0x34/0x90
 get_signal+0x834/0x860
 do_signal+0xf4/0x330
 do_notify_resume+0xc0/0x140
 el0_svc+0xb8/0xd0
 el0t_64_sync_handler+0x10c/0x140
 el0t_64_sync+0x198/0x19c
Disabling lock debugging due to kernel taint

And after the patch:

lk_smartMem abort info:
 /tmp/0c  ESR = 0x0000000096000044
8081f6-1  EC = 0x25: DABT (current EL), IL = 32 bits
165-4fd2  SET = 0, FnV = 0
-5e4e03b  EA = 0, S1PTW = 0
e-57fa8e  FSC = 0x04: level 0 translation fault
22.dmp
Data abort info:
  ISV = 0, ISS = 0x00000044, ISS2 = 0x00000000
  CM = 0, WnR = 1, TnD = 0, TagAccess = 0
  GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ffbf801f8e7bf010] address between user and kernel address ranges
Internal error: Oops: 0000000096000044 [#1] SMP
CPU: 1 UID: 0 PID: 260 Comm: husband Not tainted 6.12.0 #1
Hardware name: Raspberry Pi Compute Module 3 Rev 1.0 (DT)
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : tlb_remove_table+0xc8/0x1c0
lr : tlb_remove_table+0xc0/0x1c0
sp : ffff80008117b9d0
x29: ffff80008117b9d0 x28: ffff80008117bb98 x27: 0000aaaad1df8000
x26: 0000aaaad1df7fff x25: ffff0000044f4468 x24: 00000000ffffffdb
x23: fffffdffc008f2c0 x22: ffff8000808a1860 x21: 0000aaaad1c00000
x20: fffffdffc008f2c0 x19: ffff80008117bb98 x18: ffff80008117bb50
x17: ffffffffffffffff x16: 0000000000000000 x15: ffff8000807b62a8
x14: 0000ffffb7640fff x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000037b6f
x8 : ffff80008094a0e7 x7 : 0000000000000800 x6 : 0000000000000000
x5 : 0000000000000801 x4 : dead000000000122 x3 : 0000000000000000
x2 : 0000020040000000 x1 : ffff000000000000 x0 : ffbf801f8e7bf000
Call trace:
 tlb_remove_table+0xc8/0x1c0 (P)
 tlb_remove_table+0xc0/0x1c0 (L)
 free_pgd_range+0x228/0x5d0
 free_pgtables+0x1c4/0x270
 exit_mmap+0x130/0x2c0
 mmput+0x70/0x190
 do_exit+0x248/0x8f0
 do_group_exit+0x34/0x90
 get_signal+0x834/0x860
 do_signal+0x118/0x330
 do_notify_resume+0xc0/0x140
 el0_svc+0xb8/0xd0
 el0t_64_sync_handler+0x10c/0x140
 el0t_64_sync+0x198/0x19c
Code: 52850000 94006fdd f9000660 b4000080 (b900101f)
---[ end trace 0000000000000000 ]---
Fixing recursive fault but reboot is needed!
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000008
Mem abort info:
  ESR = 0x0000000096000044
  EC = 0x25: DABT (current EL), IL = 32 bits
  SET = 0, FnV = 0
  EA = 0, S1PTW = 0
  FSC = 0x04: level 0 translation fault
Data abort info:
  ISV = 0, ISS = 0x00000044, ISS2 = 0x00000000
  CM = 0, WnR = 1, TnD = 0, TagAccess = 0
  GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=000000000238c000
[0000000000000008] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 0000000096000044 [#2] SMP
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Tainted: G      D            6.12.0 #1
Tainted: [D]=DIE
Hardware name: Raspberry Pi Compute Module 3 Rev 1.0 (DT)
pstate: a0000005 (NzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : free_unref_page_commit+0x70/0x2c0
lr : free_unref_page+0x17c/0x400
sp : ffff800080003da0
x29: ffff800080003da0 x28: 0000000000000000 x27: 0000000000000000
x26: 0000000000000000 x25: ffff00003e39e0b8 x24: 0000000000000000
x23: 0000000000000000 x22: 00000000ffffffff x21: ffff00003e39efc0
x20: 0000000000000000 x19: ffff800080add340 x18: ffff800081163c40
x17: ffff7fffbda55000 x16: ffff800080000000 x15: 0000000000001900
x14: 00000f423fffe700 x13: 0000000000000000 x12: ffff00003e39efc0
x11: 0000000000000001 x10: 0000000000000001 x9 : ffff7fffbda55000
x8 : fffffdffc00e81c8 x7 : ffff00003e39efe0 x6 : 0000000000000020
x5 : ffff00003e39efc0 x4 : 00000000ffffffff x3 : 0000000000000000
x2 : fffffdffc00e81c0 x1 : 0000000000000000 x0 : ffff800080add340
Call trace:
 free_unref_page_commit+0x70/0x2c0 (P)
 free_unref_page+0x17c/0x400 (L)
 free_unref_page+0x17c/0x400
 __folio_put+0x50/0xb0
 tlb_remove_table_rcu+0xb0/0xc0
 rcu_core+0x1f4/0x520
 rcu_core_si+0x10/0x20
 handle_softirqs+0xf4/0x230
 __do_softirq+0x14/0x20
 ____do_softirq+0x10/0x20
 call_on_irq_stack+0x24/0x54
 do_softirq_own_stack+0x1c/0x30
 __irq_exit_rcu+0xc8/0x100
 irq_exit_rcu+0x10/0x20
 el1_interrupt+0x38/0x60
 el1h_64_irq_handler+0x18/0x30
 el1h_64_irq+0x6c/0x70
 default_idle_call+0x28/0x3c (P)
 default_idle_call+0x24/0x3c (L)
 do_idle+0x9c/0xf0
 cpu_startup_entry+0x34/0x40
 rest_init+0xb8/0xc0
 do_one_initcall+0x0/0x16c
 __primary_switched+0x88/0x90
Code: 8b2ac0e7 f8296827 8b0600a7 f9401181 (f9000428)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: Oops: Fatal exception in interrupt
SMP: stopping secondary CPUs
Kernel Offset: disabled
CPU features: 0x000,00000c00,00800000,0200420b
Memory Limit: none
---[ end Kernel panic - not syncing: Oops: Fatal exception in interrupt ]---

Thanks,
Nuno