[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20241128081056.1361739-6-quic_ziyuzhan@quicinc.com>
Date: Thu, 28 Nov 2024 16:10:53 +0800
From: Ziyue Zhang <quic_ziyuzhan@...cinc.com>
To: vkoul@...nel.org, kishon@...nel.org, robh+dt@...nel.org,
manivannan.sadhasivam@...aro.org, bhelgaas@...gle.com, kw@...ux.com,
lpieralisi@...nel.org, quic_qianyu@...cinc.com, conor+dt@...nel.org,
neil.armstrong@...aro.org, andersson@...nel.org,
konradybcio@...nel.org
Cc: quic_tsoni@...cinc.com, quic_shashim@...cinc.com,
quic_kaushalk@...cinc.com, quic_tdas@...cinc.com,
quic_tingweiz@...cinc.com, quic_aiquny@...cinc.com, kernel@...cinc.com,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-phy@...ts.infradead.org,
Ziyue Zhang <quic_ziyuzhan@...cinc.com>
Subject: [PATCH v2 5/8] arm64: dts: qcom: qcs8300: enable pcie0 for qcs8300 platform
Add configurations in devicetree for PCIe0, board related gpios,
PMIC regulators, etc.
Signed-off-by: Ziyue Zhang <quic_ziyuzhan@...cinc.com>
---
arch/arm64/boot/dts/qcom/qcs8300-ride.dts | 44 ++++++++++++++++++++++-
1 file changed, 43 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
index 7eed19a694c3..7f97f771c44a 100644
--- a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
+++ b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
@@ -213,7 +213,7 @@ vreg_l9c: ldo9 {
&gcc {
clocks = <&rpmhcc RPMH_CXO_CLK>,
<&sleep_clk>,
- <0>,
+ <&pcie0_phy>,
<0>,
<0>,
<0>,
@@ -223,6 +223,23 @@ &gcc {
<0>;
};
+&pcie0 {
+ perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+ wake-gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-0 = <&pcie0_default_state>;
+ pinctrl-names = "default";
+
+ status = "okay";
+};
+
+&pcie0_phy {
+ vdda-phy-supply = <&vreg_l6a>;
+ vdda-pll-supply = <&vreg_l5a>;
+
+ status = "okay";
+};
+
&qupv3_id_0 {
status = "okay";
};
@@ -247,6 +264,31 @@ &rpmhcc {
clock-names = "xo";
};
+&tlmm {
+ pcie0_default_state: pcie0-default-state {
+ clkreq-pins {
+ pins = "gpio1";
+ function = "pcie0_clkreq";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
+ perst-pins {
+ pins = "gpio2";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ wake-pins {
+ pins = "gpio0";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+ };
+};
+
&uart7 {
status = "okay";
};
--
2.34.1
Powered by blists - more mailing lists