[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20241128-qcs8300_initial_dtsi-v3-2-26aa8a164914@quicinc.com>
Date: Thu, 28 Nov 2024 16:44:44 +0800
From: Jingyi Wang <quic_jingyw@...cinc.com>
To: Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio
<konradybcio@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski
<krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Catalin Marinas
<catalin.marinas@....com>,
Will Deacon <will@...nel.org>
CC: <quic_tengfan@...cinc.com>, <linux-arm-msm@...r.kernel.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
Jingyi Wang
<quic_jingyw@...cinc.com>,
Krzysztof Kozlowski <krzk@...nel.org>
Subject: [PATCH v3 2/4] arm64: defconfig: enable clock controller,
interconnect and pinctrl for QCS8300
Enable clock controller, interconnect and pinctrl for Qualcomm
QCS8300 platform to boot to UART console.
The serial engine depends on gcc, interconnect and pinctrl. Since
the serial console driver is only available as built-in, so these
configs needs be built-in for the UART device to probe and register
the console.
Reviewed-by: Krzysztof Kozlowski <krzk@...nel.org>
Signed-off-by: Jingyi Wang <quic_jingyw@...cinc.com>
---
arch/arm64/configs/defconfig | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index d13218d0c30f..3d9e48940c96 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -608,6 +608,7 @@ CONFIG_PINCTRL_MSM8996=y
CONFIG_PINCTRL_MSM8998=y
CONFIG_PINCTRL_QCM2290=y
CONFIG_PINCTRL_QCS404=y
+CONFIG_PINCTRL_QCS8300=y
CONFIG_PINCTRL_QDF2XXX=y
CONFIG_PINCTRL_QDU1000=y
CONFIG_PINCTRL_SA8775P=y
@@ -1327,6 +1328,7 @@ CONFIG_MSM_MMCC_8998=m
CONFIG_QCM_GCC_2290=y
CONFIG_QCM_DISPCC_2290=m
CONFIG_QCS_GCC_404=y
+CONFIG_QCS_GCC_8300=y
CONFIG_SC_CAMCC_7280=m
CONFIG_QDU_GCC_1000=y
CONFIG_SC_CAMCC_8280XP=m
@@ -1634,6 +1636,7 @@ CONFIG_INTERCONNECT_QCOM_MSM8996=y
CONFIG_INTERCONNECT_QCOM_OSM_L3=m
CONFIG_INTERCONNECT_QCOM_QCM2290=y
CONFIG_INTERCONNECT_QCOM_QCS404=m
+CONFIG_INTERCONNECT_QCOM_QCS8300=y
CONFIG_INTERCONNECT_QCOM_QDU1000=y
CONFIG_INTERCONNECT_QCOM_SA8775P=y
CONFIG_INTERCONNECT_QCOM_SC7180=y
--
2.25.1
Powered by blists - more mailing lists