[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20241129144357.2008465-2-quic_msavaliy@quicinc.com>
Date: Fri, 29 Nov 2024 20:13:54 +0530
From: Mukesh Kumar Savaliya <quic_msavaliy@...cinc.com>
To: konrad.dybcio@...aro.org, andersson@...nel.org, andi.shyti@...nel.org,
linux-arm-msm@...r.kernel.org, dmaengine@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-i2c@...r.kernel.org,
conor+dt@...nel.org, agross@...nel.org, devicetree@...r.kernel.org,
vkoul@...nel.org, linux@...blig.org, dan.carpenter@...aro.org,
Frank.Li@....com, konradybcio@...nel.org, bryan.odonoghue@...aro.org,
krzk+dt@...nel.org, robh@...nel.org
Cc: quic_vdadhani@...cinc.com,
Mukesh Kumar Savaliya <quic_msavaliy@...cinc.com>
Subject: [PATCH v5 1/4] dt-bindindgs: i2c: qcom,i2c-geni: Document shared flag
Adds qcom,shared-se flag usage. Use this flag when I2C serial controller
needs to be shared in multiprocessor system(APPS,Modem,ADSP) environment.
SE(Serial Engine HW controller acting as protocol master controller) is an
I2C controller. Basically a programmable SERDES(serializer/deserializer)
coupled with data DMA entity, capable in handling a bus protocol, and data
moves to/from system memory.
Two clients from different processors can share an I2C controller for same
slave device OR their owned slave devices. Assume I2C Slave EEPROM device
connected with I2C controller. Each client from ADSP SS and APPS Linux SS
can perform i2c transactions.
Transfer gets serialized by Lock TRE + DMA xfer + Unlock TRE at HW level.
Signed-off-by: Mukesh Kumar Savaliya <quic_msavaliy@...cinc.com>
---
.../devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
index 9f66a3bb1f80..88682a333399 100644
--- a/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
+++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
@@ -60,6 +60,14 @@ properties:
power-domains:
maxItems: 1
+ qcom,shared-se:
+ description: True if I2C controller is shared between two or more system processors.
+ SE(Serial Engine HW controller working as protocol master controller) is an
+ I2C controller. Basically, a programmable SERDES(serializer/deserializer)
+ coupled with data DMA entity, capable in handling a bus protocol, and data
+ moves to/from system memory.
+ type: boolean
+
reg:
maxItems: 1
--
2.25.1
Powered by blists - more mailing lists