lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20241202-asus_qcom_display-v5-1-e0d3752ff71f@hotmail.com>
Date: Mon, 02 Dec 2024 19:18:11 +0100
From: Maud Spierings via B4 Relay <devnull+maud_spierings.hotmail.com@...nel.org>
To: Bjorn Andersson <andersson@...nel.org>, 
 Konrad Dybcio <konradybcio@...nel.org>, Rob Herring <robh@...nel.org>, 
 Krzysztof Kozlowski <krzk+dt@...nel.org>, 
 Conor Dooley <conor+dt@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org, 
 linux-kernel@...r.kernel.org, 
 Konrad Dybcio <konrad.dybcio@....qualcomm.com>, 
 Maud Spierings <maud_spierings@...mail.com>
Subject: [PATCH v5 1/3] arm64: dts: qcom: x1e80100-vivobook-s15: Use the
 samsung,atna33xc20 panel driver

From: Maud Spierings <maud_spierings@...mail.com>

The Asus vivobook s15 uses the ATNA56AC03 panel.
This panel is controlled by the atna33xc20 driver instead of the generic
edp-panel driver

Reviewed-by: Konrad Dybcio <konrad.dybcio@....qualcomm.com>
Signed-off-by: Maud Spierings <maud_spierings@...mail.com>
---
 .../arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts | 18 +++++++++++++++++-
 1 file changed, 17 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts b/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
index f25991b887de3fca0092c5f81c881c5d8bd71aac..8cdb2888d10a1dfc0c28480b6636584ab06853bb 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
@@ -407,9 +407,13 @@ &mdss_dp3 {
 
 	aux-bus {
 		panel {
-			compatible = "edp-panel";
+			compatible = "samsung,atna56ac03", "samsung,atna33xc20";
+			enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
 			power-supply = <&vreg_edp_3p3>;
 
+			pinctrl-0 = <&edp_bl_en>;
+			pinctrl-names = "default";
+
 			port {
 				edp_panel_in: endpoint {
 					remote-endpoint = <&mdss_dp3_out>;
@@ -475,6 +479,18 @@ &pcie6a_phy {
 	status = "okay";
 };
 
+&pmc8380_3_gpios {
+	edp_bl_en: edp-bl-en-state {
+		pins = "gpio4";
+		function = "normal";
+		power-source = <1>;
+		qcom,drive-strength = <2>;
+		bias-pull-down;
+		input-disable;
+		output-enable;
+	};
+};
+
 &qupv3_0 {
 	status = "okay";
 };

-- 
2.47.1



Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ