lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20241202215135.294829-3-afd@ti.com>
Date: Mon, 2 Dec 2024 15:51:33 -0600
From: Andrew Davis <afd@...com>
To: Bjorn Andersson <andersson@...nel.org>,
        Mathieu Poirier
	<mathieu.poirier@...aro.org>
CC: <linux-remoteproc@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        Andrew
 Davis <afd@...com>
Subject: [PATCH v2 3/5] remoteproc: keystone: Use devm action to call PM runtime put sync

This helps prevent mistakes like putting out of order in cleanup functions
and forgetting to put sync on error paths.

Signed-off-by: Andrew Davis <afd@...com>
---
 drivers/remoteproc/keystone_remoteproc.c | 36 ++++++++++++------------
 1 file changed, 18 insertions(+), 18 deletions(-)

diff --git a/drivers/remoteproc/keystone_remoteproc.c b/drivers/remoteproc/keystone_remoteproc.c
index 2af3b64bc239c..1032f440426da 100644
--- a/drivers/remoteproc/keystone_remoteproc.c
+++ b/drivers/remoteproc/keystone_remoteproc.c
@@ -365,6 +365,13 @@ static void keystone_rproc_mem_release(void *data)
 	of_reserved_mem_device_release(dev);
 }
 
+static void keystone_rproc_pm_runtime_put(void *data)
+{
+	struct device *dev = data;
+
+	pm_runtime_put_sync(dev);
+}
+
 static int keystone_rproc_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -417,30 +424,26 @@ static int keystone_rproc_probe(struct platform_device *pdev)
 	ret = pm_runtime_resume_and_get(dev);
 	if (ret < 0)
 		return dev_err_probe(dev, ret, "failed to enable clock\n");
+	ret = devm_add_action_or_reset(dev, keystone_rproc_pm_runtime_put, dev);
+	if (ret)
+		return dev_err_probe(dev, ret, "failed to add disable pm devm action\n");
 
 	ret = keystone_rproc_of_get_memories(pdev, ksproc);
 	if (ret)
-		goto disable_clk;
+		return ret;
 
 	ksproc->irq_ring = platform_get_irq_byname(pdev, "vring");
-	if (ksproc->irq_ring < 0) {
-		ret = ksproc->irq_ring;
-		goto disable_clk;
-	}
+	if (ksproc->irq_ring < 0)
+		return ksproc->irq_ring;
 
 	ksproc->irq_fault = platform_get_irq_byname(pdev, "exception");
-	if (ksproc->irq_fault < 0) {
-		ret = ksproc->irq_fault;
-		goto disable_clk;
-	}
+	if (ksproc->irq_fault < 0)
+		return ksproc->irq_fault;
 
 	ksproc->kick_gpio = gpiod_get(dev, "kick", GPIOD_ASIS);
 	ret = PTR_ERR_OR_ZERO(ksproc->kick_gpio);
-	if (ret) {
-		dev_err(dev, "failed to get gpio for virtio kicks, status = %d\n",
-			ret);
-		goto disable_clk;
-	}
+	if (ret)
+		return dev_err_probe(dev, ret, "failed to get gpio for virtio kicks\n");
 
 	ret = of_reserved_mem_device_init(dev);
 	if (ret) {
@@ -448,7 +451,7 @@ static int keystone_rproc_probe(struct platform_device *pdev)
 	} else {
 		ret = devm_add_action_or_reset(dev, keystone_rproc_mem_release, dev);
 		if (ret)
-			goto disable_clk;
+			return ret;
 	}
 
 	/* ensure the DSP is in reset before loading firmware */
@@ -474,8 +477,6 @@ static int keystone_rproc_probe(struct platform_device *pdev)
 
 release_mem:
 	gpiod_put(ksproc->kick_gpio);
-disable_clk:
-	pm_runtime_put_sync(dev);
 	return ret;
 }
 
@@ -485,7 +486,6 @@ static void keystone_rproc_remove(struct platform_device *pdev)
 
 	rproc_del(ksproc->rproc);
 	gpiod_put(ksproc->kick_gpio);
-	pm_runtime_put_sync(&pdev->dev);
 }
 
 static const struct of_device_id keystone_rproc_of_match[] = {
-- 
2.39.2


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ