| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20241202082732.3959803-5-sumanthk@linux.ibm.com>
Date: Mon, 2 Dec 2024 09:27:32 +0100
From: Sumanth Korikkar <sumanthk@...ux.ibm.com>
To: David Hildenbrand <david@...hat.com>, linux-mm <linux-mm@...ck.org>
Cc: Andrew Morton <akpm@...ux-foundation.org>,
Oscar Salvador <osalvador@...e.de>,
Gerald Schaefer <gerald.schaefer@...ux.ibm.com>,
Heiko Carstens <hca@...ux.ibm.com>, Vasily Gorbik <gor@...ux.ibm.com>,
Alexander Gordeev <agordeev@...ux.ibm.com>,
linux-s390 <linux-s390@...r.kernel.org>,
LKML <linux-kernel@...r.kernel.org>,
Sumanth Korikkar <sumanthk@...ux.ibm.com>
Subject: [RFC PATCH 4/4] s390/sclp: Add support for dynamic (de)configuration of memory
CONFIG_RUNTIME_MEMORY_CONFIGURATION introduced dynamic configuration and
deconfiguration of hotpluggable memory with altmap/non-altmap support
during runtime. Add support for dynamic (de)configuration of standby
memory on s390 by providing validation of s390 memory configuration
against user inputs by overriding arch_validate_memory_range().
Design:
1. If CONFIG_RUNTIME_MEMORY_CONFIGURATION is enabled, then support
runtime (de)configuration of standby memory. If
CONFIG_RUNTIME_MEMORY_CONFIGURATION is disabled, then provide
backward compatibility and standby memory addition is performed
during boottime.
2. If CONFIG_RUNTIME_MEMORY_CONFIGURATION is enabled,
/sys/devices/system/memory/configure_memory sysfs interface exists.
Perform memory block range validation against user inputs. Also,
measures are taken to ensure that add_memory() / remove_memory() is
performed on only standby memory ranges.
3. If CONFIG_RUNTIME_MEMORY_CONFIGURATION is enabled, provide the
maximum number of configurable memory blocks on s390 via
/sys/devices/system/memory/max_configurable.
NOTE: When there is no hotpluggable standby memory and when
CONFIG_RUNTIME_MEMORY_CONFIGURATION is enabled,
/sys/devices/system/memory/max_configurable will return 0.
Reviewed-by: Gerald Schaefer <gerald.schaefer@...ux.ibm.com>
Signed-off-by: Sumanth Korikkar <sumanthk@...ux.ibm.com>
---
drivers/s390/char/sclp_cmd.c | 80 ++++++++++++++++++++++++++++++++----
1 file changed, 71 insertions(+), 9 deletions(-)
diff --git a/drivers/s390/char/sclp_cmd.c b/drivers/s390/char/sclp_cmd.c
index f905a6643a0f..8c02097960b0 100644
--- a/drivers/s390/char/sclp_cmd.c
+++ b/drivers/s390/char/sclp_cmd.c
@@ -171,11 +171,15 @@ static DEFINE_MUTEX(sclp_mem_mutex);
static LIST_HEAD(sclp_mem_list);
static u8 sclp_max_storage_id;
static DECLARE_BITMAP(sclp_storage_ids, 256);
+static bool runtime_memory_config = IS_ENABLED(CONFIG_RUNTIME_MEMORY_CONFIGURATION);
+static unsigned long long max_standby, max_online;
+static ssize_t max_configurable;
struct memory_increment {
struct list_head list;
u16 rn;
int standby;
+ int boot_standby;
};
struct assign_storage_sccb {
@@ -390,24 +394,29 @@ static struct notifier_block sclp_mem_nb = {
.notifier_call = sclp_mem_notifier,
};
-static void __init align_to_block_size(unsigned long long *start,
- unsigned long long *size,
- unsigned long long alignment)
+static void align_to_block_size(unsigned long long *start,
+ unsigned long long *size,
+ unsigned long long alignment)
{
- unsigned long long start_align, size_align;
+ unsigned long long start_align;
start_align = roundup(*start, alignment);
- size_align = rounddown(*start + *size, alignment) - start_align;
-
- pr_info("Standby memory at 0x%llx (%lluM of %lluM usable)\n",
- *start, size_align >> 20, *size >> 20);
+ *size = rounddown(*start + *size, alignment) - start_align;
*start = start_align;
- *size = size_align;
+}
+
+static void __init set_max_memory_configuration(void)
+{
+ unsigned long long blocksz = memory_block_size_bytes();
+
+ max_online = roundup(max_online, blocksz);
+ max_configurable = (max_online + max_standby) / blocksz;
}
static void __init add_memory_merged(u16 rn)
{
unsigned long long start, size, addr, block_size;
+ unsigned long long basesize, basestart;
static u16 first_rn, num;
if (rn && first_rn && (first_rn + num == rn)) {
@@ -423,9 +432,17 @@ static void __init add_memory_merged(u16 rn)
if (start + size > ident_map_size)
size = ident_map_size - start;
block_size = memory_block_size_bytes();
+ basestart = start;
+ basesize = size;
align_to_block_size(&start, &size, block_size);
+ pr_info("Standby memory at 0x%llx (%lluM of %lluM usable)\n",
+ basestart, size >> 20, basesize >> 20);
if (!size)
goto skip_add;
+ if (runtime_memory_config) {
+ max_standby += size;
+ goto skip_add;
+ }
for (addr = start; addr < start + size; addr += block_size)
add_memory(0, addr, block_size,
MACHINE_HAS_EDAT1 ?
@@ -435,6 +452,48 @@ static void __init add_memory_merged(u16 rn)
num = 1;
}
+#ifdef CONFIG_RUNTIME_MEMORY_CONFIGURATION
+bool arch_validate_memory_range(unsigned long long start, unsigned long long end)
+{
+ unsigned long long incr_start, incr_end, curr = start;
+ struct memory_increment *incr;
+ bool rangefound = false;
+
+ if (start >= ident_map_size || end + 1 > ident_map_size) {
+ pr_info("Memory range (start:0x%llx,end:0x%llx) exceeds max physical memory (0x%lx)\n",
+ start, end, ident_map_size);
+ goto out;
+ }
+
+ list_for_each_entry(incr, &sclp_mem_list, list) {
+ incr_start = rn2addr(incr->rn);
+ incr_end = incr_start + sclp.rzm - 1;
+
+ if (curr != incr_start)
+ continue;
+ /*
+ * Allow runtime configuration/deconfiguration for only
+ * standby memory
+ */
+ if (!incr->boot_standby)
+ goto out;
+ if (incr_end == end) {
+ rangefound = true;
+ goto out;
+ } else {
+ curr = incr_end + 1;
+ }
+ }
+out:
+ return rangefound;
+}
+
+ssize_t arch_get_memory_max_configurable(void)
+{
+ return max_configurable;
+}
+#endif
+
static void __init sclp_add_standby_memory(void)
{
struct memory_increment *incr;
@@ -456,6 +515,7 @@ static void __init insert_increment(u16 rn, int standby, int assigned)
return;
new_incr->rn = rn;
new_incr->standby = standby;
+ new_incr->boot_standby = standby;
last_rn = 0;
prev = &sclp_mem_list;
list_for_each_entry(incr, &sclp_mem_list, list) {
@@ -502,6 +562,7 @@ static int __init sclp_detect_standby_memory(void)
if (!sccb->entries[i])
continue;
assigned++;
+ max_online += sclp.rzm;
insert_increment(sccb->entries[i] >> 16, 0, 1);
}
break;
@@ -530,6 +591,7 @@ static int __init sclp_detect_standby_memory(void)
if (rc)
goto out;
sclp_add_standby_memory();
+ set_max_memory_configuration();
out:
free_page((unsigned long) sccb);
return rc;
--
2.45.2
Powered by blists - more mailing lists