| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20241202085939.2022191-1-quic_vdadhani@quicinc.com>
Date: Mon, 2 Dec 2024 14:29:39 +0530
From: Viken Dadhaniya <quic_vdadhani@...cinc.com>
To: andersson@...nel.org, konradybcio@...nel.org, robh@...nel.org,
krzk+dt@...nel.org, conor+dt@...nel.org, linux-arm-msm@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
konrad.dybcio@....qualcomm.com, dmitry.baryshkov@...aro.org
Cc: quic_msavaliy@...cinc.com, quic_anupkulk@...cinc.com,
Viken Dadhaniya <quic_vdadhani@...cinc.com>
Subject: [PATCH v4 RESEND] arm64: dts: qcom: qcs615: Add QUPv3 configuration
Add DT support for QUPv3 Serial Engines.
Co-developed-by: Mukesh Kumar Savaliya <quic_msavaliy@...cinc.com>
Signed-off-by: Mukesh Kumar Savaliya <quic_msavaliy@...cinc.com>
Signed-off-by: Viken Dadhaniya <quic_vdadhani@...cinc.com>
---
Build Dependencies:
Base:
https://lore.kernel.org/linux-devicetree/20240926-add_initial_support_for_qcs615-v3-5-e37617e91c62@quicinc.com/
https://lore.kernel.org/linux-devicetree/20240926-add_initial_support_for_qcs615-v3-6-e37617e91c62@quicinc.com/
Clock: https://lore.kernel.org/linux-devicetree/20240920-qcs615-clock-driver-v2-3-2f6de44eb2aa@quicinc.com/
ICC: https://lore.kernel.org/linux-devicetree/20240924143958.25-2-quic_rlaggysh@quicinc.com/
Apps SMMU: https://lore.kernel.org/all/20241011063112.19087-1-quic_qqzhou@quicinc.com/
GPI documentation: https://lore.kernel.org/r/linux-devicetree/20241115092854.1877369-1-quic_vdadhani@quicinc.com/
v3 -> v4:
- Correct gpi compatible string as qcs615 requires an ee_offset of 0x0.
v3 Link: https://lore.kernel.org/all/20241111084331.2564643-1-quic_vdadhani@quicinc.com/
v2 -> v3:
- Modify GPI DMA node name and compatible string.
- Drop buses aliases from SOC DTSI.
- Add GPI compatible for QCS615 in seperate patch.
v2 Link: https://lore.kernel.org/all/20241028112049.30734-1-quic_vdadhani@quicinc.com/
v1 -> v2:
- Add opp-shared property.
- Use QCOM_ICC_TAG_ALWAYS flag in interconnect property.
v1 Link: https://lore.kernel.org/all/20241011103346.22925-1-quic_vdadhani@quicinc.com/
---
arch/arm64/boot/dts/qcom/qcs615.dtsi | 627 ++++++++++++++++++++++++++-
1 file changed, 623 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/qcs615.dtsi b/arch/arm64/boot/dts/qcom/qcs615.dtsi
index 865ead601f85..cccfde956973 100644
--- a/arch/arm64/boot/dts/qcom/qcs615.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs615.dtsi
@@ -5,6 +5,7 @@
#include <dt-bindings/clock/qcom,qcs615-gcc.h>
#include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/dma/qcom-gpi.h>
#include <dt-bindings/interconnect/qcom,icc.h>
#include <dt-bindings/interconnect/qcom,qcs615-rpmh.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -296,6 +297,26 @@ mc_virt: interconnect-2 {
qcom,bcm-voters = <&apps_bcm_voter>;
};
+ qup_opp_table: opp-table-qup {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-75000000 {
+ opp-hz = /bits/ 64 <75000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-128000000 {
+ opp-hz = /bits/ 64 <128000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+
psci {
compatible = "arm,psci-1.0";
method = "smc";
@@ -392,6 +413,24 @@ qfprom: efuse@...000 {
#size-cells = <1>;
};
+ gpi_dma0: dma-controller@...000 {
+ compatible = "qcom,qcs615-gpi-dma", "qcom,sdm845-gpi-dma";
+ reg = <0x0 0x800000 0x0 0x60000>;
+ #dma-cells = <3>;
+ interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>;
+ dma-channels = <8>;
+ dma-channel-mask = <0xf>;
+ iommus = <&apps_smmu 0xd6 0x0>;
+ status = "disabled";
+ };
+
qupv3_id_0: geniqup@...000 {
compatible = "qcom,geni-se-qup";
reg = <0x0 0x8c0000 0x0 0x6000>;
@@ -400,6 +439,7 @@ qupv3_id_0: geniqup@...000 {
<&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
clock-names = "m-ahb",
"s-ahb";
+ iommus = <&apps_smmu 0xc3 0x0>;
#address-cells = <2>;
#size-cells = <2>;
status = "disabled";
@@ -412,13 +452,416 @@ uart0: serial@...000 {
pinctrl-0 = <&qup_uart0_tx>, <&qup_uart0_rx>;
pinctrl-names = "default";
interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
- interconnects = <&aggre1_noc MASTER_QUP_0 0
- &mc_virt SLAVE_EBI1 0>,
- <&gem_noc MASTER_APPSS_PROC 0
- &config_noc SLAVE_QUP_0 0>;
+ interconnects = <&aggre1_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@...000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x884000 0x0 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_i2c1_data_clk>;
+ pinctrl-names = "default";
+ interconnects = <&aggre1_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre1_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+ status = "disabled";
+ };
+
+ i2c2: i2c@...000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x888000 0x0 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_i2c2_data_clk>;
+ pinctrl-names = "default";
+ interconnects = <&aggre1_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre1_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+ status = "disabled";
+ };
+
+ spi2: spi@...000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x0 0x00888000 0x0 0x4000>;
+ interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
+ pinctrl-names = "default";
+ interconnects = <&aggre1_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ uart2: serial@...000 {
+ compatible = "qcom,geni-uart";
+ reg = <0x0 0x00888000 0x0 0x4000>;
+ interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_uart2_cts>, <&qup_uart2_rts>,
+ <&qup_uart2_tx>, <&qup_uart2_rx>;
+ pinctrl-names = "default";
+ interconnects = <&aggre1_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@...000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x88c000 0x0 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_i2c3_data_clk>;
+ pinctrl-names = "default";
+ interconnects = <&aggre1_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre1_noc MASTER_QUP_0 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 3 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+ status = "disabled";
+ };
+ };
+
+ gpi_dma1: dma-controller@...000 {
+ compatible = "qcom,qcs615-gpi-dma", "qcom,sdm845-gpi-dma";
+ reg = <0x0 0xa00000 0x0 0x60000>;
+ #dma-cells = <3>;
+ interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>;
+ dma-channels = <8>;
+ dma-channel-mask = <0xf>;
+ iommus = <&apps_smmu 0x376 0x0>;
+ status = "disabled";
+ };
+
+ qupv3_id_1: geniqup@...000 {
+ compatible = "qcom,geni-se-qup";
+ reg = <0x0 0xac0000 0x0 0x2000>;
+ ranges;
+ clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+ <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+ clock-names = "m-ahb",
+ "s-ahb";
+ iommus = <&apps_smmu 0x363 0x0>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ status = "disabled";
+
+ i2c4: i2c@...000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0xa80000 0x0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_i2c4_data_clk>;
+ pinctrl-names = "default";
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+ status = "disabled";
+ };
+
+ spi4: spi@...000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x0 0xa80000 0x0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
+ pinctrl-names = "default";
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ operating-points-v2 = <&qup_opp_table>;
+ dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+ status = "disabled";
+ };
+
+ uart4: serial@...000 {
+ compatible = "qcom,geni-uart";
+ reg = <0x0 0xa80000 0x0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_uart4_cts>, <&qup_uart4_rts>,
+ <&qup_uart4_tx>, <&qup_uart4_rx>;
+ pinctrl-names = "default";
+ interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ operating-points-v2 = <&qup_opp_table>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@...000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0xa84000 0x0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_i2c5_data_clk>;
+ pinctrl-names = "default";
+ interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+ status = "disabled";
+ };
+
+ i2c6: i2c@...000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0xa88000 0x0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_i2c6_data_clk>;
+ pinctrl-names = "default";
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+ status = "disabled";
+ };
+
+ spi6: spi@...000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x0 0xa88000 0x0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
+ pinctrl-names = "default";
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ operating-points-v2 = <&qup_opp_table>;
+ dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 2 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+ status = "disabled";
+ };
+
+ uart6: serial@...000 {
+ compatible = "qcom,geni-uart";
+ reg = <0x0 0xa88000 0x0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_uart6_cts>, <&qup_uart6_rts>,
+ <&qup_uart6_tx>, <&qup_uart6_rx>;
+ pinctrl-names = "default";
+ interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ operating-points-v2 = <&qup_opp_table>;
+ status = "disabled";
+ };
+
+ i2c7: i2c@...000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0xa8c000 0x0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_i2c7_data_clk>;
+ pinctrl-names = "default";
+ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>,
+ <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config",
+ "qup-memory";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+ dma-names = "tx",
+ "rx";
+ status = "disabled";
+ };
+
+ spi7: spi@...000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x0 0xa8c000 0x0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_spi7_data_clk>, <&qup_spi7_cs>;
+ pinctrl-names = "default";
+ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "qup-core",
+ "qup-config";
+ power-domains = <&rpmhpd RPMHPD_CX>;
+ operating-points-v2 = <&qup_opp_table>;
+ dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+ dma-names = "tx",
+ "rx";
+ status = "disabled";
+ };
+
+ uart7: serial@...000 {
+ compatible = "qcom,geni-uart";
+ reg = <0x0 0xa8c000 0x0 0x4000>;
+ clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+ clock-names = "se";
+ pinctrl-0 = <&qup_uart7_cts>, <&qup_uart7_rts>,
+ <&qup_uart7_tx>, <&qup_uart7_rx>;
+ pinctrl-names = "default";
+ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ interconnects = <&aggre1_noc MASTER_BLSP_1 QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+ <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+ &config_noc SLAVE_QUP_1 QCOM_ICC_TAG_ALWAYS>;
interconnect-names = "qup-core",
"qup-config";
power-domains = <&rpmhpd RPMHPD_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
};
@@ -478,6 +921,102 @@ tlmm: pinctrl@...0000 {
#interrupt-cells = <2>;
wakeup-parent = <&pdc>;
+ qup_i2c1_data_clk: qup-i2c1-data-clk-state {
+ pins = "gpio4", "gpio5";
+ function = "qup0";
+
+ };
+
+ qup_i2c2_data_clk: qup-i2c2-data-clk-state {
+ pins = "gpio0", "gpio1";
+ function = "qup0";
+ };
+
+ qup_i2c3_data_clk: qup-i2c3-data-clk-state {
+ pins = "gpio18", "gpio19";
+ function = "qup0";
+ };
+
+ qup_i2c4_data_clk: qup-i2c4-data-clk-state {
+ pins = "gpio20", "gpio21";
+ function = "qup1";
+ };
+
+ qup_i2c5_data_clk: qup-i2c5-data-clk-state {
+ pins = "gpio14", "gpio15";
+ function = "qup1";
+ };
+
+ qup_i2c6_data_clk: qup-i2c6-data-clk-state {
+ pins = "gpio6", "gpio7";
+ function = "qup1";
+ };
+
+ qup_i2c7_data_clk: qup-i2c7-data-clk-state {
+ pins = "gpio10", "gpio11";
+ function = "qup1";
+ };
+
+ qup_spi2_data_clk: qup-spi2-data-clk-state {
+ pins = "gpio0", "gpio1", "gpio2";
+ function = "qup0";
+ };
+
+ qup_spi2_cs: qup-spi2-cs-state {
+ pins = "gpio3";
+ function = "qup0";
+ };
+
+ qup_spi2_cs_gpio: qup-spi2-cs-gpio-state {
+ pins = "gpio3";
+ function = "gpio";
+ };
+
+ qup_spi4_data_clk: qup-spi4-data-clk-state {
+ pins = "gpio20", "gpio21", "gpio22";
+ function = "qup1";
+ };
+
+ qup_spi4_cs: qup-spi4-cs-state {
+ pins = "gpio23";
+ function = "qup1";
+ };
+
+ qup_spi4_cs_gpio: qup-spi4-cs-gpio-state {
+ pins = "gpio23";
+ function = "gpio";
+ };
+
+ qup_spi6_data_clk: qup-spi6-data-clk-state {
+ pins = "gpio6", "gpio7", "gpio8";
+ function = "qup1";
+ };
+
+ qup_spi6_cs: qup-spi6-cs-state {
+ pins = "gpio9";
+ function = "qup1";
+ };
+
+ qup_spi6_cs_gpio: qup-spi6-cs-gpio-state {
+ pins = "gpio9";
+ function = "gpio";
+ };
+
+ qup_spi7_data_clk: qup-spi7-data-clk-state {
+ pins = "gpio10", "gpio11", "gpio12";
+ function = "qup1";
+ };
+
+ qup_spi7_cs: qup-spi7-cs-state {
+ pins = "gpio13";
+ function = "qup1";
+ };
+
+ qup_spi7_cs_gpio: qup-spi7-cs-gpio-state {
+ pins = "gpio13";
+ function = "gpio";
+ };
+
qup_uart0_tx: qup-uart0-tx-state {
pins = "gpio16";
function = "qup0";
@@ -487,6 +1026,86 @@ qup_uart0_rx: qup-uart0-rx-state {
pins = "gpio17";
function = "qup0";
};
+
+ qup_uart2_cts: qup-uart2-cts-state {
+ pins = "gpio0";
+ function = "qup0";
+ };
+
+ qup_uart2_rts: qup-uart2-rts-state {
+ pins = "gpio1";
+ function = "qup0";
+ };
+
+ qup_uart2_tx: qup-uart2-tx-state {
+ pins = "gpio2";
+ function = "qup0";
+ };
+
+ qup_uart2_rx: qup-uart2-rx-state {
+ pins = "gpio3";
+ function = "qup0";
+ };
+
+ qup_uart4_cts: qup-uart4-cts-state {
+ pins = "gpio20";
+ function = "qup1";
+ };
+
+ qup_uart4_rts: qup-uart4-rts-state {
+ pins = "gpio21";
+ function = "qup1";
+ };
+
+ qup_uart4_tx: qup-uart4-tx-state {
+ pins = "gpio22";
+ function = "qup1";
+ };
+
+ qup_uart4_rx: qup-uart4-rx-state {
+ pins = "gpio23";
+ function = "qup1";
+ };
+
+ qup_uart6_cts: qup-uart6-cts-state {
+ pins = "gpio6";
+ function = "qup1";
+ };
+
+ qup_uart6_rts: qup-uart6-rts-state {
+ pins = "gpio7";
+ function = "qup1";
+ };
+
+ qup_uart6_tx: qup-uart6-tx-state {
+ pins = "gpio8";
+ function = "qup1";
+ };
+
+ qup_uart6_rx: qup-uart6-rx-state {
+ pins = "gpio9";
+ function = "qup1";
+ };
+
+ qup_uart7_cts: qup-uart7-cts-state {
+ pins = "gpio10";
+ function = "qup1";
+ };
+
+ qup_uart7_rts: qup-uart7-rts-state {
+ pins = "gpio11";
+ function = "qup1";
+ };
+
+ qup_uart7_tx: qup-uart7-tx-state {
+ pins = "gpio12";
+ function = "qup1";
+ };
+
+ qup_uart7_rx: qup-uart7-rx-state {
+ pins = "gpio13";
+ function = "qup1";
+ };
};
dc_noc: interconnect@...0000 {
--
2.34.1
Powered by blists - more mailing lists