[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <75dc7814-a55e-4a6f-9df9-39b7c875dee9@quicinc.com>
Date: Mon, 2 Dec 2024 15:02:15 +0530
From: Janaki Ramaiah Thota <quic_janathot@...cinc.com>
To: Krzysztof Kozlowski <krzk@...nel.org>,
Bjorn Andersson
<andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>, Rob Herring
<robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley
<conor+dt@...nel.org>
CC: <quic_mohamull@...cinc.com>, <quic_hbandi@...cinc.com>,
<linux-arm-msm@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <quic_msavaliy@...cinc.com>
Subject: Re: [PATCH v3] arm64: dts: qcom: qcs6490-rb3gen2: enable Bluetooth
Hi Krzysztof,
Thanks for the valuable review comments.
On 10/22/2024 5:57 PM, Krzysztof Kozlowski wrote:
> On 22/10/2024 12:46, Janaki Ramaiah Thota wrote:
>> Add Bluetooth and UART7 support for qcs6490-rb3gen2.
>>
>> Signed-off-by: Janaki Ramaiah Thota <quic_janathot@...cinc.com>
>> ---
>> arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 122 ++++++++++++++++++-
>> 1 file changed, 121 insertions(+), 1 deletion(-)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
>> index 0d45662b8028..b774d89172ea 100644
>> --- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
>> +++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
>> @@ -1,6 +1,6 @@
>> // SPDX-License-Identifier: BSD-3-Clause
>> /*
>> - * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
>> + * Copyright (c) 2023-2024 Qualcomm Innovation Center, Inc. All rights reserved.
>> */
>>
>> /dts-v1/;
>> @@ -31,7 +31,9 @@
>> chassis-type = "embedded";
>>
>> aliases {
>> + bluetooth0 = &bluetooth;
>
> Which driver uses this alias?
>
>> serial0 = &uart5;
>> + serial1 = &uart7;
>> };
>
> ...
>
>
>> };
>>
>> &uart5 {
>> status = "okay";
>> };
>>
>> +&uart7 {
>> + status = "okay";
>> + /delete-property/interrupts;
>> + interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>,
>> + <&tlmm 31 IRQ_TYPE_EDGE_FALLING>;
>
>
>> + pinctrl-names = "default", "sleep";
>> + pinctrl-1 = <&qup_uart7_sleep_cts>, <&qup_uart7_sleep_rts>,
>> + <&qup_uart7_sleep_tx>, <&qup_uart7_sleep_rx>;
>
> This could be just one phandle to state node with multiple pins subnode.
>
Since we have different configuration for 3 GPIOs, it’s not good to
combine all 4 GPIOs into one common sleep configuration. Each GPIO
configuration is having separate requirements based on the Bluetooth SOC.
This is as per hardware recommendations.
>> +
>> + bluetooth: bluetooth {
>> + compatible = "qcom,wcn6750-bt";
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&bt_en>, <&sw_ctrl>;
>> + enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>;
>> + swctrl-gpios = <&tlmm 86 GPIO_ACTIVE_HIGH>;
>> + vddaon-supply = <&vreg_s7b_0p972>;
>> + vddbtcxmx-supply = <&vreg_s7b_0p972>;
>> + vddrfacmn-supply = <&vreg_s7b_0p972>;
>> + vddrfa0p8-supply = <&vreg_s7b_0p972>;
>> + vddrfa1p7-supply = <&vreg_s1b_1p872>;
>> + vddrfa1p2-supply = <&vreg_s8b_1p272>;
>> + vddrfa2p2-supply = <&vreg_s1c_2p19>;
>> + vddasd-supply = <&vreg_l11c_2p8>;
>> + max-speed = <3200000>;
>
> There were warnings in the past. Please confirm that you addressed them
> and this is warning free.
>
Sure.
> Best regards,
> Krzysztof
>
Thanks,
Janakiram
Powered by blists - more mailing lists